 | |
| Company type | Private |
|---|---|
| Industry | Consumer electronics |
| Founded | 1950 |
| Headquarters | Plouzané, France |
Key people | Georges Cabasse, founder |
| Products | Loudspeakers |
| Website | www |
Cabasse is a French audio manufacturer founded by Georges Cabasse (1928-2019 [1] ) in 1950. It is mainly known for its home loudspeakers but has also produced professional audio speakers for studio recording or sound reinforcement in theatres and power amplifiers. The company is now part of a larger group called Veom Group.
Cabasse is one of the oldest loudspeakers manufacturer in France, and is known for its involvement in research, its high standard of quality, and the names of their products that used to be related to sea (especially boat names like clipper, sampan, ketch, sloop...)
In the eighties their reputation came from their professional active speakers (often used by recording studios) and the honeycomb membranes that allowed high power with low distortion. These membranes were used by the very small Galiote (home hi-fi) and the huge Saturn, a subwoofer for theatres, fitted with a 22 inches unit. They also used to perform astounding comparisons between live sound and speakers sound and therefore focused their goals on high dynamics (for real sound pressure levels), high efficiency and low distortion levels.
In 1986 La Géode was inaugurated, and it remains the only 12-channel Omnimax in the world. For special low frequency effects, 4 giant subwoofers (100 cubic feet for 2000 lb) fitted with 2 x 22 inches honeycomb membranes complement this 12.6 system. [5]
In the nineties, Cabasse started to work on coaxial units in order to reduce directivity through spherical wavefront. This is their Spatially Coherent System principle. It was implemented through the TC21, a 3-way coaxial unit whose bandwidth goes from 200 Hz to 20 kHz with a 30° off-axis response very close to the on-axis response.
At the beginning of 2006 they unveiled a high-end 4-way unit and presented the theoric approach in a paper at the Audio Engineering Society. This system, released in 2007, is called La Sphère and consists of two spheric coaxial speakers, a filter and four power amplifiers.
In November 2016 Stream BAR, a high-resolution home theater sound bar was launched.
October 2017 saw the launch of a new high-end floorstanding speaker known as Murano Alto. This particular speaker is assembled in the brand's workshops in Plouzané (NW France in Brittany).
SWELL, Cabasse's first nomadic Bluetooth high-fidelity speaker was also released in October 2017.
The Pearl: October 2018 saw the release of The Pearl - a high-resolution active connected speaker with an integrated and patented automatic room correction system (It won the coveted Diapason d'or award in 2020).
The Pearl Akoya was launched in October 2019. It won the Diapason d'or award in 2021 as well as Stereonet's Applause Award [6] in the same year. This second high-resolution active connected speaker with an integrated room correction system is a more compact version than The Pearl.
The Pearl Sub, the first 2.1 active connected subwoofer was introduced into the market in 2020. It brings maximum dynamics, with deep bass, optimized sound for each of its speakers (DEAP technology), room correction and high resolution streaming. It has been optimized for iO/iO2/iO3, Riga/Riga2 and Baltic 4/Baltic 5 speakers.
The 'GEN2' sound optimization was released in February 2021 and made available to owners of The Pearl Collection via the Cabasse StreamControl app. This sound optimization further enhances the acoustics of the two high-resolution active connected speakers The Pearl and The Pearl AKoya.
Throughout the years, the company has developed and renewed its traditional and lifestyle Hi-fi product lines with Surf, Jersey, Antigua, Murano, Eole 4. Voice control for all of Cabasse's Wi-Fi streaming products has been available since 2018 through the Cabasse Assistant via Google Assistant, and Amazon Alexa compatibility was introduced in 2019.
High fidelity is the high-quality reproduction of sound. It is popular with audiophiles and home audio enthusiasts. Ideally, high-fidelity equipment has inaudible noise and distortion, and a flat frequency response within the human hearing range.
A subwoofer is a loudspeaker designed to reproduce low-pitched audio frequencies, known as bass and sub-bass, that are lower in frequency than those which can be (optimally) generated by a woofer. The typical frequency range that is covered by a subwoofer is about 20–200 Hz for consumer products, below 100 Hz for professional live sound, and below 80 Hz in THX-certified systems. Thus, one or more subwoofers are important for high-quality sound reproduction as they are responsible for the lowest two to three octaves of the ten octaves that are audible. This very low-frequency (VLF) range reproduces the natural fundamental tones of the bass drum, electric bass, double bass, grand piano, contrabassoon, tuba, in addition to thunder, gunshots, explosions, etc.
A loudspeaker is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A speaker system, also often simply referred to as a speaker or loudspeaker, comprises one or more such speaker drivers, an enclosure, and electrical connections possibly including a crossover network. The speaker driver can be viewed as a linear motor attached to a diaphragm which couples that motor's movement to motion of air, that is, sound. An audio signal, typically from a microphone, recording, or radio broadcast, is amplified electronically to a power level capable of driving that motor in order to reproduce the sound corresponding to the original unamplified electronic signal. This is thus the opposite function to the microphone; indeed the dynamic speaker driver, by far the most common type, is a linear motor in the same basic configuration as the dynamic microphone which uses such a motor in reverse, as a generator.
An audio power amplifier amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all manner of sound systems including sound reinforcement, public address, home audio systems and musical instrument amplifiers like guitar amplifiers. It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers.
Audio crossovers are a type of electronic filter circuitry that splits an audio signal into two or more frequency ranges, so that the signals can be sent to loudspeaker drivers that are designed to operate within different frequency ranges. The crossover filters can be either active or passive. They are often described as two-way or three-way, which indicate, respectively, that the crossover splits a given signal into two frequency ranges or three frequency ranges. Crossovers are used in loudspeaker cabinets, power amplifiers in consumer electronics and pro audio and musical instrument amplifier products. For the latter two markets, crossovers are used in bass amplifiers, keyboard amplifiers, bass and keyboard speaker enclosures and sound reinforcement system equipment.
A mid-range speaker is a loudspeaker driver that reproduces sound in the frequency range from 250 to 2000 Hz.
A woofer or bass speaker is a technical term for a loudspeaker driver designed to produce low frequency sounds, typically from 20 Hz up to a few hundred Hz. A subwoofer can take the lower part of this range, normally up to 80 Hz. The name is from the onomatopoeic English word for a dog's deep bark, "woof". The most common design for a woofer is the electrodynamic driver, which typically uses a stiff paper cone, driven by a voice coil surrounded by a magnetic field.
Celestion is a British designer and exporter of professional loudspeakers.
Powered speakers, also known as self-powered speakers and active speakers, are loudspeakers that have built-in amplifiers. Powered speakers are used in a range of settings, including in sound reinforcement systems, both for the main speakers facing the audience and the monitor speakers facing the performers; by DJs performing at dance events and raves; in private homes as part of hi-fi or home cinema audio systems and as computer speakers. They can be connected directly to a mixing console or other low-level audio signal source without the need for an external amplifier. Some active speakers designed for sound reinforcement system use have an onboard mixing console and microphone preamplifier, which enables microphones to be connected directly to the speaker.
A full-range loudspeaker drive unit is defined as a driver which reproduces as much of the audible frequency range as possible, within the limitations imposed by the physical constraints of a specific design. The frequency range of these drivers is maximized through the use of a whizzer cone and other means. Most single driver systems, such as those in radios, or small computer speaker designs, cannot reproduce all of the audible frequencies or the entire audible audio range.
A loudspeaker enclosure or loudspeaker cabinet is an enclosure in which speaker drivers and associated electronic hardware, such as crossover circuits and, in some cases, power amplifiers, are mounted. Enclosures may range in design from simple, homemade DIY rectangular particleboard boxes to very complex, expensive computer-designed hi-fi cabinets that incorporate composite materials, internal baffles, horns, bass reflex ports and acoustic insulation. Loudspeaker enclosures range in size from small "bookshelf" speaker cabinets with 4-inch (10 cm) woofers and small tweeters designed for listening to music with a hi-fi system in a private home to huge, heavy subwoofer enclosures with multiple 18-inch (46 cm) or even 21-inch (53 cm) speakers in huge enclosures which are designed for use in stadium concert sound reinforcement systems for rock music concerts.
Studio monitors are loudspeakers in speaker enclosures specifically designed for professional audio production applications, such as recording studios, filmmaking, television studios, radio studios and project or home studios, where accurate audio reproduction is crucial. Among audio engineers, the term monitor implies that the speaker is designed to produce relatively flat (linear) phase and frequency responses. In other words, it exhibits minimal emphasis or de-emphasis of particular frequencies, the loudspeaker gives an accurate reproduction of the tonal qualities of the source audio, and there will be no relative phase shift of particular frequencies—meaning no distortion in sound-stage perspective for stereo recordings. Beyond stereo sound-stage requirements, a linear phase response helps impulse response remain true to source without encountering "smearing". An unqualified reference to a monitor often refers to a near-field design. This is a speaker small enough to sit on a stand or desk in proximity to the listener, so that most of the sound that the listener hears is coming directly from the speaker, rather than reflecting off walls and ceilings. Monitor speakers may include more than one type of driver or, for monitoring low-frequency sounds, such as bass drum, additional subwoofer cabinets may be used.
Bi-amping and tri-amping is the practice of using two or three audio amplifiers respectively to amplify different audio frequency ranges, with the amplified signals being routed to different speaker drivers, such as woofers, subwoofers and tweeters. With bi-amping and tri-amping, an audio crossover is used to divide a sound signal into different frequency ranges, each of which is then separately amplified and routed to separate speaker drivers. In Powered speakers using bi-amping, multiple speaker drivers are in the same speaker enclosure. In some bi-amp set-ups, the drivers are in separate speaker enclosures, such as with home stereos that contain two speakers and a separate subwoofer.
A stage monitor system is a set of performer-facing loudspeakers called monitor speakers, stage monitors, floor monitors, wedges, or foldbacks on stage during live music performances in which a sound reinforcement system is used to amplify a performance for the audience. The monitor system allows musicians to hear themselves and fellow band members clearly.
KEF is a British company specialising in the design and production of a range of high-end audio products, including HiFi speakers, subwoofers, architecture speakers, wireless speakers, and headphones. It was founded in Maidstone, Kent in 1961 by a BBC engineer named Raymond Cooke (1925–1995).
The Wharfedale MACH series of loudspeakers consists of the MACH 3, 5, 7, and 9. This is an informational page devoted to owners and users of these loudspeakers and those interested in history and construction of electronic sound reproduction.
Acapella Audio Arts is a German manufacturer of loudspeakers, and one of the oldest hi-fi manufactures in Germany. Acapella Audio was founded by Alfred Rudolph and Herman Winters in 1978 in Duisburg, Germany. Acapella is famous for its heavy horn-loaded speakers that are able to reproduce the whole audible sound spectrum. Other signature characteristic for the products of the company is the widely utilized plasma tweeter technology.
A keyboard amplifier is a powered electronic amplifier and loudspeaker in a wooden speaker cabinet used for the amplification of electronic keyboard instruments. Keyboard amplifiers are distinct from other types of amplification systems such as guitar amplifiers due to the particular challenges associated with making keyboards sound louder on stage; namely, to provide solid low-frequency sound reproduction for the deep basslines that keyboards can play and crisp high-frequency sound for the high-register notes. Another difference between keyboard amplifiers and guitar/bass amplifiers is that keyboard amps are usually designed with a relatively flat frequency response and low distortion. In contrast, many guitar and bass amp designers purposely make their amplifiers modify the frequency response, typically to "roll-off" very high frequencies, and most rock and blues guitar amps, and since the 1980s and 1990s, even many bass amps are designed to add distortion or overdrive to the instrument tone.
Monitor Audio is a British company that specialises in designing and manufacturing loudspeakers and sound systems.
Thomas J. Danley is an American audio engineer, electrical engineer and inventor, the holder of multiple patents for audio transducers, especially high-linearity, high-output professional horn loudspeaker systems. Danley first gained notice in the 1980s with his novel servomotor-driven subwoofer systems used to reproduce very low frequencies in concert tours and theme parks. In 2000 he advanced the implementation of multiple-entry horns in 2000 with several designs led by the SPL-td1, a seven-driver loudspeaker. In 2005, he started a new company, Danley Sound Labs, through which he patented further technologies and produced a wide variety of loudspeaker models based on these technologies.