Related Research Articles
Pipe(s), PIPE(S) or piping may refer to:
Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications. The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.
Within industry, piping is a system of pipes used to convey fluids from one location to another. The engineering discipline of piping design studies the efficient transport of fluid.
Nucor Corporation is an American company based in Charlotte, North Carolina, that produces steel and related products. It is the largest steel producer in the United States and the largest recycler of scrap in North America. Nucor is the 16th-largest steel producer in the world. Along with Commercial Metals Company, it is one of two primary suppliers of rebar used to reinforce concrete in buildings, bridges, roads, and infrastructure in the U.S.
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.
Electrosteel Castings Limited is an Indian company based in Kolkata. It is one of the largest manufacturers of ductile iron pipes in the Indian sub-continent, having a production capacity of 280,000 MT per annum. Electrosteel was the pioneer in setting up a Ductile Iron Spun Pipe Plant in India in 1994 and is among the five largest producers of Spun Iron pipes in the world.
A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
A fitting or adapter is used in pipe systems to connect sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating fluid flow. These fittings are used in plumbing to manipulate the conveyance of fluids such as water for potatory, irrigational, sanitary, and refrigerative purposes, gas, petroleum, liquid waste, or any other liquid or gaseous substances required in domestic or commercial environments, within a system of pipes or tubes, connected by various methods, as dictated by the material of which these are made, the material being conveyed, and the particular environmental context in which they will be used, such as soldering, mortaring, caulking, Plastic welding, welding, friction fittings, threaded fittings, and compression fittings.
Evraz Oregon Steel Mills is a subsidiary of the Russia steel producer Evraz Group and has operations in Portland, Oregon, United States, and also with facilities in Colorado and Alberta. The company produces items such as structural tubing, pipes, and steel rails.
The Farrel Corporation is an American manufacturing company based in Ansonia, Connecticut. Today, they manufacture process equipment for the plastics industry, and employ roughly 100 people.
Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow—liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipes are far stiffer per unit weight than solid members.
Georg Fischer comprises three divisions GF Piping Systems, GF Casting Solutions, and GF Machining Solutions. Founded in 1802, the Corporation is headquartered in Switzerland and is present in 33 countries, with 140 companies, 57 of them production facilities. Its approximately 15 000 employees generated sales of CHF 4.57 billion in 2018. GF offers pipes for the safe transport of liquids and gases, lightweight casting components in vehicles, and high-precision manufacturing technologies.
Foundry Products Operations was a subsidiary operation of the Cincinnati Milling Machine Company (CMM), a company which no longer exists. Some parts of the company evolved into the present Milacron, Inc. and Cincinnati Machine. CMM relied heavily on castings for the manufacturing of its machine tool products. The castings were produced at Cincinnati foundries owned by CMM and at foundries independent of CMM, between 1907 and 1988.
Electrotherm (India) Limited (Ltd.) is an Indian technology conglomerate. Its operations span across many different segments of the manufacturing and process industries, including steelmaking, foundry, heat treatment, the design and manufacturing of electric vehicles, and the energy industry. Ranging from more energy-efficient alternatives to renewable energy. It's also India's largest manufacturer of induction furnaces.
American Cast Iron Pipe Company is a manufacturer of ductile iron pipe, spiral-welded steel pipe, fire hydrants, and valves for the waterworks industry, and electric-resistance-welded steel pipe for the oil and natural gas industry. Headquartered in Birmingham, Alabama, American's diversified product line also includes static castings and high performance fire pumps.
The Vollrath Company is an American company based in Sheboygan, Wisconsin that manufactures stainless steel and aluminum equipment and smallwares, and deep draw stainless steel items, for commercial and institutional foodservice operations.
Genuit Group plc, formerly Polypipe Group, is a manufacturer of plastic piping systems, for use in the residential, commercial, civils and infrastructure sectors. The piping systems are used for a variety of applications including drainage, plumbing, water supply, water management, cable management, heating and ventilation. The company is listed on the London Stock Exchange and is a constituent of the FTSE 250 Index.
JM Eagle is an American corporation and a manufacturer of plastic pipe. At its 22 plants in North America, the company manufactures polyvinyl chloride (PVC) and high-density polyethylene pipe for a variety of industries including utility, plumbing, electrical, natural gas, irrigation, potable water, drainage, and sewage.
agru Kunststofftechnik Gesellschaft m.b.H. is a company with global operations in engineering plastics based in Bad Hall, Austria, and was founded in 1948 by Alois Gruber senior. AGRU manufactures and supplies pipeline systems, semi-finished products, concrete protection liners, and geomembranes made of engineered plastics. As one of the 130 largest industrial companies in Austria, and one of Upper Austrias' TOP 50 biggest Companies, AGRU employs 1020 staff and has global sales of EUR 375 million (2017). In addition to the five factories at the global headquarters in Bad Hall, the company operates production sites in the United States, Germany, Poland and China. The export share is over 90%. Sales partners in more than 150 countries distribute products from AGRU, for which approximately 100,000 tons of plastic are processed annually.
HDPE pipe is a type of flexible plastic pipe used to transfer fluids and gases. It is often employed for replacing aging concrete or steel main pipelines. Constructed from the thermoplastic HDPE, it has low permeability and robust molecular bonding, making it suitable for high-pressure pipelines. HDPE pipe is often used for water mains, gas mains, sewer mains, slurry transfer lines, rural irrigation, fire-suppression system supply lines, electrical and communication conduits, and stormwater and drainage pipes.
References
- 1 2 3 Dennis, Bob (August 1, 1984). "Charlotte Pipe, Foundry ends Dowd-only tradition". The Charlotte News. pp. 8A–9A.
- 1 2 3 Curcio, Charles (May 15, 2020). "More details on history, future of Charlotte Pipe". The Stanly News & Press. Retrieved March 10, 2024.
- ↑ "Charlotte Pipe buys famed Wisconsin foundry firm". Business North Carolina. August 5, 2022. Retrieved March 10, 2024.
- 1 2 3 Ellis, Kevin (October 26, 2023). "Charlotte Pipe goes country with move to Stanly County foundry". Business North Carolina. Retrieved March 10, 2024.
- ↑ "About Us". Charlotte Pipe And Foundry Company. Retrieved March 10, 2024.