Chelembron system

Last updated
Chelembron system
Place of originItaly
Production history
DesignerMichele Lorenzoni
Designed1668
Specifications
Feed systemSeparate magazines, 20 Rounds

The Chelembron system was a magazine system used for flintlock repeating rifles that originated around 1668. While the invention of the system is attributed to Michele Lorenzoni, the system is named after French gun-makers who made many guns in India using the system. The basis of the Chelembron system is a barrel, as well as magazines, that rotate around a central axis, and are turned to load first powder and then ball into the breech. Weapons of the system carry 20 rounds. [1]

Contents

Origin and manufacture

The earliest known weapon that uses the Chelembron system, dated 1668, was signed by T. Lefer Avalenza. [2] Chelembron made multiple rifles using the system in India in the second half of the 18th century. [1] [3] A magazine gun that belonged to George III also bears the name "Chalembrom". [4] [2] [5] In 1779, a former French soldier named Claude Martin, was given the position of Superintendent of Artillery and Arsenals to the Nawab of Oudh. While Claude held this position, many impressive weapons were made at the Lucknow Arsenal. At least one gun made here, which bears both his name and the name of the arsenal, uses the Chelembron system. [2] A Chelembron gun manufactured in 1785 is heavily damaged, and appears to have been retrieved from a battlefield. [6] Pistols using the system were also made, with a pair being manufactured around 1800. [1]

Mechanics

Separate tubular magazines containing powder and ball sit under the barrel. [2] To reload the weapon, the gun is pointed upwards, the release trigger is depressed, [5] and the barrel can be rotated, causing the attached magazines to rotate over the breech, which deposits a load of powder, and primes the pan. [2] [7] At the same time, the cock is rotated to the firing position and the pan is closed. This movement of the magazines also causes a ball to drop into a compartment in the rear section of the gun, which is then pushed into the rear of the barrel by a plunger. [7] The breech and ball-plunger compartments are separate fixed chambers attached to the stock and lock part of the weapon.

Reference section

  1. 1 2 3 Finer, Peter. Arms and Armour of Asia 2018. 38-39 Duke Street, St James's, London, SW1Y 6DF: Peter Finer.{{cite book}}: CS1 maint: location (link)
  2. 1 2 3 4 5 Blackmore, Howard L. (1965). Guns and rifles of the world. London: Chancellor Press. ISBN   0-907486-01-0. OCLC   9447119.
  3. Blackmore, Howard L. (2000). Hunting weapons : from the Middle Ages to the twentieth century. Dover Publications. ISBN   0-486-40961-9. OCLC   247473483.
  4. "Explore the Royal Collection Online". www.rct.uk. Retrieved 2020-08-18.
  5. 1 2 Laking, Guy Francis, Sir, 1875–1919. (1904). The armoury of Windsor Castle European section. Bradbury, Agnew & Co. OCLC   780134291.{{cite book}}: CS1 maint: multiple names: authors list (link)
  6. the-saleroom.com. "AN IMPORTANT SILVER MOUNTED 20-BORE FLINTLOCK REPEATING GUN AND BAYONET FROM THE PERSONAL ARMOURY". www.the-saleroom.com. Retrieved 2020-08-28.
  7. 1 2 L., Blackmore, Howard (1968). Royal sporting guns at Windsor. Her Maj.'s Stat. Off. pp. 50–51. OCLC   886192638.

Related Research Articles

Machine gun Sustained fully-automatic firearm

A machine gun is a fully automatic, rifled autoloading firearm designed for sustained direct fire with rifle cartridges. Other automatic firearms such as assault rifles and automatic rifles are typically designed more for firing short bursts rather than continuous firepower, and not considered machine guns.

A rifle is a long-barreled firearm designed for accurate shooting, with a barrel that has a helical pattern of grooves (rifling) cut into the bore wall. In keeping with their focus on accuracy, rifles are typically designed to be held with both hands and braced firmly against the shooter's shoulder via a buttstock for stability during shooting. Rifles are used extensively in warfare, self defense, law enforcement, crime, hunting, and shooting sports.

Single-shot

Single-shot firearms are firearms that hold only a single round of ammunition, and must be reloaded manually after every shot. The history of firearms began with single-shot designs, then multi-barreled designs appeared, and eventually many centuries passed before multi-shot repeater designs became commonplace.

Percussion cap Ignition source in a type of firearm mechanism

The percussion cap or percussion primer, introduced in the early 1820s, is a type of single-use percussion ignition device for muzzle loader firearm locks enabling them to fire reliably in any weather condition. This crucial invention gave rise to the cap lock mechanism or percussion lock system using percussion caps struck by the hammer to set off the gunpowder charge in percussion guns including percussion rifles and cap and ball firearms. Any firearm using a caplock mechanism is a percussion gun. Any long gun with a cap-lock mechanism and rifled barrel is a percussion rifle. Cap and ball describes cap-lock firearms discharging a single bore-diameter spherical bullet with each shot.

A muzzleloader is any firearm into which the projectile and the propellant charge is loaded from the muzzle of the gun. This is distinct from the modern designs of breech-loading firearms. The term "muzzleloader" applies to both rifled and smoothbore type muzzleloaders, and may also refer to the marksman who specializes in the shooting of such firearms. The firing methods, paraphernalia and mechanism further divide both categories as do caliber.

Bolt action Type of firearm mechanism

Bolt action is a type of manual firearm action that is operated by directly manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the weapon.

Action (firearms) Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

Flintlock Firearm with flint-striking ignition

Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as snaplock and snaphaunce.

Wheellock Firearm action

A wheellock, wheel-lock or wheel lock is a friction-wheel mechanism which creates a spark that causes a firearm to fire. It was the next major development in firearms technology after the matchlock and the first self-igniting firearm. Its name is from its rotating steel wheel to provide ignition. Developed in Europe around 1500, it was used alongside the matchlock and was later superseded by the snaplock (1540s), the snaphance (1560s) and the flintlock.

Breechloader Class of gun

A breechloader is a firearm in which the user loads the ammunition via the rear (breech) end of its barrel, as opposed to a muzzleloader, which loads ammunition via the front (muzzle).

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reloads. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil and/or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

Jarmann M1884 Bolt action Repeating rifle

The Jarmann M1884 is a Norwegian bolt-action repeating rifle designed in 1878 adopted in 1884. The Jarmann's adoption, and subsequent modifications, turned the Norwegian Army from a fighting force armed with single-shot black-powder weapons into a force armed with modern repeating weapons firing smokeless ammunition. Several thousand were manufactured to equip the Norwegian Armed Forces in the 1880s, and it also saw some, though very limited, use in Sweden. The design is unique, and was the brainchild of Norwegian engineer Jacob Smith Jarmann. After the design had been phased out of the Norwegian Army, a number of the weapons were rebuilt as harpoon guns.

Lock (firearm)

The lock of a firearm is the mechanism used to initiate firing. It is an historical term, in that it generally refers to such mechanisms used in muzzle-loading and early breech-loading firearms. Side-lock refers to the type of construction, in which the individual components of the mechanism are mounted either side of a single plate. The assembly is then mounted to the stock on the side of the firearm. In modern firearm designs, the mechanism to initiate firing is generally constructed within the frame or receiver of the firearm and is referred to as the firing or trigger mechanism.

M1819 Hall rifle Rifle

The M1819 Hall rifle was a single-shot breech-loading rifle designed by John Hancock Hall, patented on May 21, 1811, and adopted by the U.S. Army in 1819. It was preceded by the Harpers Ferry M1803. It used a pivoting chamber breech design and was made with either flintlock or percussion cap ignition systems. The years of production were from the 1820s to the 1840s at the Harpers Ferry Arsenal. This was the first breech-loading rifle to be adopted in large numbers by any nation's army, but not the first breech-loading military rifle – the Ferguson rifle was used briefly by the British Army in the American Revolutionary War. The Hall rifle remained overshadowed by common muskets and muzzleloading rifles which were still prevalent until the Civil War. The early flintlocks were mostly converted to percussion ignition.

Puckle gun Primitive crew-served, manually-operated flintlock revolver patented in 1718 by James Puckle

The Puckle gun was a primitive crew-served, manually-operated flintlock revolver patented in 1718 by James Puckle, (1667–1724) a British inventor, lawyer and writer. It was one of the earliest weapons to be referred to as a "machine gun", being called such in a 1722 shipping manifest, though its operation does not match the modern use of the term. It was never used during any combat operation or war. Production was highly limited and may have been as few as two guns.

Kalthoff repeater Weapon

The Kalthoff repeater was a type of repeating firearm that was designed by members of the Kalthoff family around 1630, and became the first repeating firearm to be brought into military service. At least nineteen gunsmiths are known to have made weapons following the Kalthoff design. Some early Kalthoff guns were wheellocks, but the rest were flintlocks. The capacity varied between 5 and 30 rounds, depending on the style of the magazines. A single forward and back movement of the trigger guard, which could be done in 1–2 seconds, readied the weapon for firing. The caliber of Kalthoff guns generally varied between 0.4 and 0.8 inches, though .3 caliber examples also exist.

During the American Civil War, an assortment of small arms found their way onto the battlefield. Though the muzzle-loading percussion cap rifle was the most numerous weapon, being standard issue for the Union and Confederate armies, many other firearms, ranging from the single-shot breech-loading Sharps and Burnside rifles to the Spencer and the Henry rifles, two of the world's first repeating rifles, were issued by the hundreds of thousands, mostly by the Union. The Civil War brought many advances in firearms technology, most notably the widespread use of rifled barrels.

The Cookson flintlock rifle, a lever-action breech-loading repeater, also known as the Cookson gun, is one of many similar designs to make an appearance on the world stage beginning in the 17th century. The Victoria & Albert Museum in London has a Cookson Gun, dating to 1690. According to the museum, John Cookson made several repeating guns based on this system. He signed one 'Fecit Londini', which suggests he was a London maker. Another John Cookson, who was also a gunmaker, is known to have worked in America. He is recorded in Boston, Mass. between 1701 and 1762. In 1756 he advertised repeating firearms firing nine shots in the local paper, the Boston Gazette. It is probable that he was related to the John Cookson who worked in London.

Repeating firearm

A repeating firearm, or repeater, is any firearm that is capable of being fired repeatedly before having to manually reload new ammunition into the weapon.