China RoHS

Last updated

China RoHS (Restriction of Hazardous Substances), officially known as Administrative Measure on the Control of Pollution Caused by Electronic Information Products [1] is a Chinese government regulation to control certain materials, including lead. The Ministry of Industry and Information Technology [2] (MIIT) of China is responsible for approval and publication of China's RoHS regulations.

Contents

"Administration on the Control of Pollution Caused by Electronic Information Products" (ACPEIP or China RoHS I) was released in 2006 by the MIIT. China RoHS I was replaced by the newest regulation, "Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products" (China RoHS II), which went into effect July 1, 2016. [3]

China RoHS II expanded the product scope of China RoHS I from Electronic Information Products (EIP) to Electrical and Electronic Products (EEP). [3] Products listed in the EEP Catalogue must comply with hazardous substance restriction limits for lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE), unless they fall into the Exemptions List.

All items shipped to China must be marked with its proper marking for the restriction of the use of hazardous substances per standard SJ/T 11364 as to whether the item is compliant or non-compliant. [4] The EEP logo is used to mark parts and assemblies that do not contain unacceptable amounts of substances identified by the regulations, and that are environmentally safe. Items that do contain hazardous substances are marked with the EEP logo including an Environment Friendly Use Period (EFUP) value in years. Furthermore, per standard SJ/T 11364, a table in simplified Chinese must be included in the product manual guide specifying whether or not any of the hazardous substances exceed the threshold at the homogenous level.

China RoHS banned substances

There are currently six substances considered environmentally hazardous by the China RoHS II directive as specified in standard GB/T 26572-2011. [5] The substances followed by its restriction limits are below.

  1. Lead, 0.1%
  2. Mercury, 0.1%
  3. Cadmium, 0.01%
  4. Hexavalent chromium, 0.1%
  5. Polybrominated biphenyls, 0.1%
  6. Polybrominated diphenyl ethers, 0.1%

Similar to EU RoHS 2 directive, China RoHS II allows for technology exemptions.

Possible Future Additions of RoHS Substances

According to the China Electronics Standardization Institute, MIIT is considering the addition of four new substances to the China RoHS regulation. The four new substances are phthalates, namely:

If the amendment passes, China will have the same RoHS substances as the 2015 EU RoHS amendment. The expected publication date of the regulation is July 2022. The addition of phthalates to the RoHS regulation would advance China's green industrial development program, which is part of their 14th Five-Year Plan. [7]

Environment Friendly Use Period

Examples of EFUP labels EFUP labels.png
Examples of EFUP labels

Environment Friendly Use Period (EFUP) is the period of time before any of the RoHS substances are likely to leak out, causing possible harm to health and the environment. [8] Each product that contains RoHS substances above the maximum permitted concentration values is labelled with an orange circle composed of two arrows containing a number that gives the EFUP in years; for example, a circled 10 indicates an EFUP of 10 years. [8] A special EFUP label containing the letter "e" indicates that the product contains less than the maximum concentration value (MCV) of all six hazardous substances. [9] The EFUP calculation methods are described in SJ/Z 11388-2009. [10]

Mandatory compliance product type

Mandatory compliance to China RoHS II restriction limits are applicable to Fifteen product types

  1. Air conditioners
  2. Electric water heaters
  3. Fax machines
  4. Miniature computers
  5. Mobile communication devices
  6. Monitors
  7. Photocopiers
  8. Printers
  9. Refrigerators
  10. Telephones
  11. Televisions
  12. Washing machines
  13. Mini Fan
  14. Powerbank
  15. Electric Gadget

See also

Related Research Articles

<span class="mw-page-title-main">Tin pest</span> Deterioration of tin objects at low temperatures

Tin pest is an autocatalytic, allotropic transformation of the element tin, which causes deterioration of tin objects at low temperatures. Tin pest has also been called tin disease, tin blight or tin leprosy.

<span class="mw-page-title-main">Waste Electrical and Electronic Equipment Directive</span> European Union recycling directive

The Waste Electrical and Electronic Equipment Directive is a European Community Directive, numbered 2012/19/EU, concerned with waste electrical and electronic equipment (WEEE). Together with the RoHS Directive 2011/65/EU, it became European Law in February 2003. The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods, with a minimum rate of 4 kilograms (9 lb) per head of population per annum recovered for recycling by 2009. The RoHS Directive set restrictions upon European manufacturers as to the material content of new electronic equipment placed on the market.

<span class="mw-page-title-main">Restriction of Hazardous Substances Directive</span> European Union directive restricting ten hazardous materials

The Restriction of Hazardous Substances Directive 2002/95/EC, short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.

Polybrominated diphenyl ethers or PBDEs, are a class of organobromine compounds that are used as flame retardants. Like other brominated flame retardants, PBDEs have been used in a wide array of products, including building materials, electronics, furnishings, motor vehicles, airplanes, plastics, polyurethane foams, and textiles. They are structurally akin to polychlorinated diphenyl ethers (PCDEs), polychlorinated biphenyls (PCBs) and other polyhalogenated compounds, consisting of two halogenated aromatic rings. PBDEs are classified according to the average number of bromine atoms in the molecule. The health hazards of these chemicals have attracted increasing scrutiny, and they have been shown to reduce fertility in humans at levels found in households. Because of their toxicity and persistence, the industrial production of some PBDEs is restricted under the Stockholm Convention, a treaty to control and phase out major persistent organic pollutants (POPs).

<span class="mw-page-title-main">Flame retardant</span> Substance applied to items to slow burning or delay ignition

The term flame retardants subsumes a diverse group of chemicals that are added to manufactured materials, such as plastics and textiles, and surface finishes and coatings. Flame retardants are activated by the presence of an ignition source and are intended to prevent or slow the further development of ignition by a variety of different physical and chemical methods. They may be added as a copolymer during the polymerisation process, or later added to the polymer at a moulding or extrusion process or applied as a topical finish. Mineral flame retardants are typically additive while organohalogen and organophosphorus compounds can be either reactive or additive.

<span class="mw-page-title-main">CE marking</span> Declaration of conformity with European standards

On commercial products, the letters CE mean that the manufacturer or importer affirms the goods' conformity with European health, safety, and environmental protection standards. It is not a quality indicator or a certification mark. The CE marking is required for goods sold in the European Economic Area (EEA), but is also found on products sold elsewhere that have been manufactured to EEA standards.

Brominated flame retardants (BFRs) are organobromine compounds that have an inhibitory effect on combustion chemistry and tend to reduce the flammability of products containing them. The brominated variety of commercialized chemical flame retardants comprise approximately 19.7% of the market. They are effective in plastics and textile applications like electronics, clothes and furniture.

<span class="mw-page-title-main">Polybrominated biphenyl</span> Group of chemical compounds

Polybrominated biphenyls (PBBs), also called brominated biphenyls or polybromobiphenyls, are a group of manufactured chemicals that consist of polyhalogenated derivatives of a biphenyl core. Their chlorine analogs are the PCBs. While once widely used commercially, PBBs are now controlled substances under the Restriction of Hazardous Substances Directive, which limits their use in electrical and electronic products sold in the EU.

<span class="mw-page-title-main">Electronic waste</span> Discarded electronic devices

Electronic waste or e-waste describes discarded electrical or electronic devices. It is also commonly known as waste electrical and electronic equipment (WEEE) or end-of-life (EOL) electronics. Used electronics which are destined for refurbishment, reuse, resale, salvage recycling through material recovery, or disposal are also considered e-waste. Informal processing of e-waste in developing countries can lead to adverse human health effects and environmental pollution. The growing consumption of electronic goods due to the digital revolution and innovations in science and technology, such as bitcoin, has led to a global e-waste problem and hazard. The rapid exponential increase of e-waste is due to frequent new model releases and unnecessary purchases of electrical and electronic equipment (EEE), short innovation cycles and low recycling rates, and a drop in the average life span of computers.

<span class="mw-page-title-main">Electronics industry</span> Industry that focuses in the electronics production

The electronics industry is the economic sector that produces electronic devices. It emerged in the 20th century and is today one of the largest global industries. Contemporary society uses a vast array of electronic devices built-in automated or semi-automated factories operated by the industry. Products are primarily assembled from metal–oxide–semiconductor (MOS) transistors and integrated circuits, the latter principally by photolithography and often on printed circuit boards.

<span class="mw-page-title-main">Dibutyl phthalate</span> Chemical compound

Dibutyl phthalate (DBP) is an organic compound which is commonly used as a plasticizer because of its low toxicity and wide liquid range. With the chemical formula C6H4(CO2C4H9)2, it is a colorless oil, although commercial samples are often yellow.

<span class="mw-page-title-main">Control of Substances Hazardous to Health Regulations 2002</span> United Kingdom legislation

The Control of Substances Hazardous to Health Regulations 2002 is a United Kingdom Statutory Instrument which states general requirements imposed on employers to protect employees and other persons from the hazards of substances used at work by risk assessment, control of exposure, health surveillance and incident planning. There are also duties on employees to take care of their own exposure to hazardous substances and prohibitions on the import of certain substances into the European Economic Area. The regulations reenacted, with amendments, the Control of Substances Hazardous to Work Regulations 1999 and implement several European Union directives.

The Electronic Waste Recycling Act of 2003 (EWRA) is a California law to reduce the use of certain hazardous substances in certain electronic products sold in the state. The act was signed into law September 2003.

<span class="mw-page-title-main">Decabromodiphenyl ether</span> Chemical compound

Decabromodiphenyl ether is a brominated flame retardant which belongs to the group of polybrominated diphenyl ethers (PBDEs). It was commercialised in the 1970s and was initially thought to be safe, but is now recognised as a hazardous and persistent pollutant. It was added to Annex A of the Stockholm Convention on Persistent Organic Pollutants in 2017, which means that treaty members must take measures to eliminate its production and use. The plastics industry started switching to decabromodiphenyl ethane as an alternative in the 1990s, but this is now also coming under regulatory pressure due to concerns over human health.

Octabromodiphenyl ether is a brominated flame retardant which belongs to the group of polybrominated diphenyl ethers (PBDEs).

<span class="mw-page-title-main">Electronic waste by country</span>

Electronic waste is a significant part of today's global, post-consumer waste stream. Efforts are being made to recycle and reduce this waste.

<span class="mw-page-title-main">Waste management law</span>

Waste management laws govern the transport, treatment, storage, and disposal of all manner of waste, including municipal solid waste, hazardous waste, and nuclear waste, among many other types. Waste laws are generally designed to minimize or eliminate the uncontrolled dispersal of waste materials into the environment in a manner that may cause ecological or biological harm, and include laws designed to reduce the generation of waste and promote or mandate waste recycling. Regulatory efforts include identifying and categorizing waste types and mandating transport, treatment, storage, and disposal practices.

The International Chemical Secretariat (ChemSec) is a governmental funded organisation founded in Sweden in 2002 to advocate in favour of stricter regulatory controls on potentially hazardous chemicals and to work with businesses on reducing the production and use of hazardous substances in their products and supply chains. ChemSec disclosed a profit of 1.56 Mio SEK for the financial year 2018. ChemSec maintains the SIN List, identifying hazardous substances likely to be restricted under EU REACH regulation.

RoHS is the Restriction of Hazardous Substances Directive by the European Union.

References

  1. "Home". chinarohs.com.
  2. "Ministry of Industry and Information Technology", Wikipedia, 2021-11-08, retrieved 2021-12-13
  3. 1 2 "CHEMICAL AND PRODUCT REGULATIONS AFFECTING ELECTRONICS: CHINA" (PDF). IPC. 2021 White Paper. May 2021.
  4. "Marking for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Product". Electronic Industry Standard of the People's Republic of China. SJ/T 11364-2014. July 9, 2014.
  5. "Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products". National Standard of the People's Republic of China. GB/T 26572-2011. May 12, 2011.
  6. "Inclusion of China RoHS Phthalates as of July 2022". Enviropass. Enviropass Expertise Inc. Retrieved 8 July 2022.
  7. "深化电器电子产品有害物质限制使用管理工作启动会以视频形式召开". www.cesi.cn. Retrieved 2022-07-08.
  8. 1 2 "China RoHS - New EFUP Guidance". 14 March 2007.
  9. "Home > Solutions > Packaging > China RoHS". Lattice Semiconductor Corporation. Archived from the original on 16 September 2011. Retrieved 21 August 2011.
  10. "General Guidelines of Environment-Friendly Use Period of Electronic Information Products". Electronic Industry Standard of the People's Republic of China. SJ/Z 11388-2009. November 17, 2009.