Contractor management

Last updated

Contractor management is the managing of outsourced work performed for an individual company. Contractor management implements a system that manages contractors' health and safety information, insurance information, training programs and specific documents that pertain to the contractor and the owner client. Most modern contracts require the effective use of contract management software to aid administration between multiple parties.

Contents

Risk and control

Risk increases with the loss of control from outsourcing work. Keeping work in-house gives an Owner Client complete control over the production or services provided including quality, durability, and consistency. Outsourcing the work reduces the amount of control held over these aspects. While contracts and agreements can be set in place to control the end product, the Owner Client cannot have complete assurance that their requirements are being met. [1]

With the continuing outsourcing of production, companies struggle to standardize their contractor management processes. Requirements and regulations from the U.S. Occupational Safety and Health Administration and other governing bodies are constantly changing. Companies need to have full visibility into the quality of work their hired contractors have performed in the past and are performing now, and this often proves difficult.

There are tools that may measure the contractor's level of performance. For example, many large refineries have integrated their gate access control system to contract management software. This provides real-time access to the performance of the contractor workforce within the refinery.

Components

Effective contractor management relies first on a standardized prequalification form (PQF). [ citation needed ] A quality prequalification form will also allow for customized functionality, as needed. The prequalification form ensures that the necessary steps are in place for a contractor to work safely and sustainably, prior to establishing an agreement, or allowing a vendor to come on-site.

A pre-qualification form (or an explanation of the requirements) is provided before bidding or quoting to assure and include the requirements in workplans and budgets.

Specifically, the prequalification form will allow the organization to track the most important aspect of contractor management – contractor prequalification across these essential dynamics:

A thorough prequalification form with each of these components is used to verify incidence rates and ensures that the contractor's insurance certification is in line with company requirements.

The prequalification form is then reviewed for OSHA logs [2] and Experience Modification Ratings (EMR) to unearth any inconsistencies and to verify the contractor license status. Finally, references are contacted to provide actual work history and experience to further certify that the contractor is prequalified for performing work at that location.

Auditing

Once the prequalification form has been filled out, the contractor must be monitored for compliance, this is a significant part of contractor management. An audit is conducted based on the services that are performed by the contractor and the risk associated with that service.

For contractors involved in a higher risk trade (e.g. electricians, [3] lockout-tagout [4] and confined space workers [5] ) the audit is an essential part of reviewing the contractor's safety program. Many of these high risk workers are involved in potentially life-threatening situations and must demonstrate their ability to protect employees and their clients from harmful situations.

In order to determine that the contractor possesses an adequate understanding of both the work to be performed and the safety standards that must be followed, the following questions are asked:

  1. Is the Safety Program that is currently in place adequate?
  2. Has the written program Safety Program been implemented?
  3. Is the inspection of critical pieces of equipment being done?
  4. Does the program allow for customization in the program based on risk?
  5. Is the Safety Program specific to the contractor and the services provided?
  6. Are the essential programs addressed, based on the services that will be performed?
  7. Is there a method to ensure the training based on written programs is being conducted?
  8. Are Job Hazard Analyses (JHAs), [6] job-site inspections and other hazard identification / mitigation techniques being used and documented?

These questions are then used as indicators to determine the contractor's level of performance. The audit ensures that the contractor has prepared for, and is enforcing, safety guidelines in their everyday practices. Essentially, the audit provides a third-party confirmation that the information supplied in the prequalification form is both accurate and up-to-date.

Database

A database can be used to record and access vendor data within a contractor management program. The database needs to be updated regularly, to ensure that all stakeholders are kept informed of any changes, particularly if the contractor management program is being used to eliminate subpar performers. The use of an online contractor management database facilitates the sharing of contractor data in a secure format with all necessary users, using 24-7/365 availability.

Benefits

The purpose of a contractor management program is to better centralize, qualify and monitor a contingent workforce. As a result of implementing a contractor management program, an organization can expect to experience some, or all, of the following advantages:

  1. Cost savings
  2. Better supplier/client relationships
  3. Higher quality contractors and suppliers
  4. Less paperwork for both owners and contractors. Some contractor management programs are cloud based software platforms that allow contractors to manage their own permits, licenses, inductions, training records and other issues that facilitate organisational and regulatory compliance.
  5. Instant information sharing & evergreen qualification
  6. Reduced risk – continuous improvement in loss control
  7. Moving towards using leading indicators vs. lagging indicators
  8. Contractor awareness with regulatory and best practices such as VPP [7] and PSM [8]

These advantages are both immediate and long-standing. A comprehensive web-based contractor management program from a reputable firm can provide a reliable basis for prequalifying contractors, vendors and other suppliers of goods and services.

Mitigating risk

There are two major considerations when managing contractors. First is deciding on the criteria for evaluation and second is developing an effective management process to evaluate these criteria. There are a number of criteria on which a contractor's safety can be evaluated, such as historical and future trend information. [9]

See also

Related Research Articles

The Occupational Safety and Health Administration is a large regulatory agency of the United States Department of Labor that originally had federal visitorial powers to inspect and examine workplaces. The United States Congress established the agency under the Occupational Safety and Health Act, which President Richard M. Nixon signed into law on December 29, 1970. OSHA's mission is to "assure safe and healthy working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education, and assistance." The agency is also charged with enforcing a variety of whistleblower statutes and regulations. OSHA's workplace safety inspections have been shown to reduce injury rates and injury costs without adverse effects on employment, sales, credit ratings, or firm survival.

Construction site safety is an aspect of construction-related activities concerned with protecting construction site workers and others from death, injury, disease or other health-related risks. Construction is an often hazardous, predominantly land-based activity where site workers may be exposed to various risks, some of which remain unrecognized. Site risks can include working at height, moving machinery and materials, power tools and electrical equipment, hazardous substances, plus the effects of excessive noise, dust and vibration. The leading causes of construction site fatalities are falls, electrocutions, crush injuries, and caught-between injuries.

<span class="mw-page-title-main">Occupational hygiene</span> Management of workplace health hazards

Occupational hygiene is the anticipation, recognition, evaluation, control, and confirmation (ARECC) of protection from risks associated with exposures to hazards in, or arising from, the workplace that may result in injury, illness, impairment, or affect the well-being of workers and members of the community. These hazards or stressors are typically divided into the categories biological, chemical, physical, ergonomic and psychosocial. The risk of a health effect from a given stressor is a function of the hazard multiplied by the exposure to the individual or group. For chemicals, the hazard can be understood by the dose response profile most often based on toxicological studies or models. Occupational hygienists work closely with toxicologists for understanding chemical hazards, physicists for physical hazards, and physicians and microbiologists for biological hazards. Environmental and occupational hygienists are considered experts in exposure science and exposure risk management. Depending on an individual's type of job, a hygienist will apply their exposure science expertise for the protection of workers, consumers and/or communities.

<span class="mw-page-title-main">Confined space</span> Space with limited entry and egress and not suitable for human inhabitants

A confined space is a space with limited entry and egress and not suitable for human inhabitants. An example is the interior of a storage tank, occasionally entered by maintenance workers but not intended for human occupancy. Hazards in a confined space often include harmful dust or gases, asphyxiation, submersion in liquids or free-flowing granular solids, electrocution, or entrapment.

Process Safety Managementof Highly Hazardous Chemicals is a regulation promulgated by the U.S. Occupational Safety and Health Administration (OSHA). It defines and regulates a process safety management (PSM) program for plants using, storing, manufacturing, handling or carrying out on-site movement of hazardous materials above defined amount thresholds. Companies affected by the regulation usually build a compliant process safety management system and integrate it in their safety management system. Non-U.S. companies frequently choose on a voluntary basis to use the OSHA scheme in their business.

<span class="mw-page-title-main">Lockout–tagout</span> Isolation of dangerous equipment.

Lock out, tag out (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy sources be "isolated and rendered inoperative" before work is started on the equipment in question. The isolated power sources are then locked and a tag is placed on the lock identifying the worker and reason the LOTO is placed on it. The worker then holds the key for the lock, ensuring that only they can remove the lock and start the equipment. This prevents accidental startup of equipment while it is in a hazardous state or while a worker is in direct contact with it.

Contingent work, casual work, or contract work, is an employment relationship with limited job security, payment on a piece work basis, typically part-time that is considered non-permanent. Although there is less job security, freelancers often report incomes higher than their former traditional jobs.

A hazard analysis is used as the first step in a process used to assess risk. The result of a hazard analysis is the identification of different types of hazards. A hazard is a potential condition and exists or not. It may, in single existence or in combination with other hazards and conditions, become an actual Functional Failure or Accident (Mishap). The way this exactly happens in one particular sequence is called a scenario. This scenario has a probability of occurrence. Often a system has many potential failure scenarios. It also is assigned a classification, based on the worst case severity of the end condition. Risk is the combination of probability and severity. Preliminary risk levels can be provided in the hazard analysis. The validation, more precise prediction (verification) and acceptance of risk is determined in the risk assessment (analysis). The main goal of both is to provide the best selection of means of controlling or eliminating the risk. The term is used in several engineering specialties, including avionics, food safety, occupational safety and health, process safety, reliability engineering.

Hazardous Waste Operations and Emergency Response is a set of guidelines produced and maintained by the Occupational Safety and Health Administration which regulates hazardous waste operations and emergency services in the United States and its territories. With these guidelines, the U.S. government regulates hazardous wastes and dangerous goods from inception to disposal.

The Michigan Occupational Safety and Health Administration (MIOSHA) is a state government agency that regulates workplace safety and health in the U.S. state of Michigan. Michigan OSHA is an agency within the Michigan Department of Licensing and Regulatory Affairs and operates under a formal state-plan agreement with the Occupational Safety and Health Administration (OSHA).

A risk management information system (RMIS) is an information system that assists in consolidating property values, claims, policy, and exposure information and providing the tracking and management reporting capabilities to enable the user to monitor and control the overall cost of risk management.

Right to know is a human right enshrined in law in several countries. UNESCO defines it as the right for people to "participate in an informed way in decisions that affect them, while also holding governments and others accountable". It pursues universal access to information as essential foundation of inclusive knowledge societies. It is often defined in the context of the right for people to know about their potential exposure to environmental conditions or substances that may cause illness or injury, but it can also refer more generally to freedom of information or informed consent.

A vendor management system (VMS) is an Internet-enabled, often Web-based application that acts as a mechanism for business to manage and procure staffing services – temporary, and, in some cases, permanent placement services – as well as outside contract or contingent labor. Typical features of a VMS application include order distribution, consolidated billing and significant enhancements in reporting capability that outperforms manual systems and processes.

Bioenvironmental Engineers (BEEs) within the United States Air Force (USAF) blend the understanding of fundamental engineering principles with a broad preventive medicine mission to identify, evaluate and recommend controls for hazards that could harm USAF Airmen, employees, and their families. The information from these evaluations help BEEs design control measures and make recommendations that prevent illness and injury across multiple specialty areas, to include: Occupational Health, Environmental Health, Radiation Safety, and Emergency Response. BEEs are provided both initial and advanced instruction at the United States Air Force School of Aerospace Medicine at Wright-Patterson Air Force Base in Dayton, Ohio.

The Construction Regulations 2007, also known as CDM Regulations or CDM 2007, previously defined legal duties for the safe operation of UK construction sites. They were superseded by the Construction Regulations 2015. The regulations placed specific duties on clients, designers and contractors, to plan their approach to health and safety. They applied throughout construction projects, from inception to final demolition and removal.

<span class="mw-page-title-main">Occupational safety and health</span> Field concerned with the safety, health and welfare of people at work

Occupational safety and health (OSH) or occupational health and safety (OHS), also known simply as occupational health or occupational safety, is a multidisciplinary field concerned with the safety, health, and welfare of people at work. These terms also refer to the goals of this field, so their use in the sense of this article was originally an abbreviation of occupational safety and health program/department etc. OSH is related to the fields of occupational medicine and occupational hygiene.

Machine guarding is a safety feature on or around manufacturing or other engineering equipment consisting of a shield or device covering hazardous areas of a machine to prevent contact with body parts or to control hazards like chips or sparks from exiting the machine. Machine guarding provides a means to protect humans from injury while working nearby or while operating equipment. It is often the first line of defense to protect operators from injury while working on or around industrial machinery during normal operations. In the U.S., machine guarding is referred to in OSHA's CFR 1910.212; in the U.K., machinery safety is covered mainly by PUWER."

Engineering controls are strategies designed to protect workers from hazardous conditions by placing a barrier between the worker and the hazard or by removing a hazardous substance through air ventilation. Engineering controls involve a physical change to the workplace itself, rather than relying on workers' behavior or requiring workers to wear protective clothing.

MS 1722:2011 – Occupational Safety and Health Management Systems – Requirements is a Malaysian Standard that provides requirements on Occupational Safety and Health Management Systems (OSHMS) and basis for the development OSH systems in an organisation. The MS 1722 standard enable an organization to manage its OHS risks and improve its OHS performance. The requirements of the standard are intended to address OHS for employees, temporary employees, contractors and other personnel on site rather than the safety of products and services. The standards provide a more effective method of protecting employees and others from workplace injuries and illnesses and demonstrate management commitment in meeting OHS requirements.

Hazardous energy in occupational safety and health is any source of energy that "can be hazardous to workers", such as from discharge of stored energy. Failure to control the unexpected release of energy can lead to machine-related injuries or fatalities. The risk from these sources of energy can be controlled in a number of ways, including access control procedures such as lockout-tagout.

References

  1. ↑ "Archived copy" (PDF). Archived from the original (PDF) on 2011-07-16. Retrieved 2010-07-26.{{cite web}}: CS1 maint: archived copy as title (link)
  2. ↑ "Occupational Safety and Health Administration" OSHA.org. Retrieved 11, April, 2012.
  3. ↑ Occupational Outlook Handbook" BLS.gov. Retrieved 11, April, 2012
  4. ↑ Control of Hazardous Energy (Lockout/Tagout)" OSHA.org. Retrieved 11, April, 2012
  5. ↑ Anatomy of Confined Spaces in Construction" OSHA.org. Retrieved 11, April, 2012
  6. ↑ Job Hazards Analysis FAQ" LBL.gov. Retrieved 11, April, 2012
  7. ↑ Voluntary Protraction Programs" OSHA.org. Retrieved 11, April, 2012
  8. ↑ Process Safety Management" OSHA.org. Retrieved 11, April, 2012
  9. ↑ Road to Reliability, http://www.plantservices.com/articles/2010/05RoadToReliability.html
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.