Deland Travel Air 2000

Last updated

Deland Travel Air 2000
Role Homebuilt aircraft
National origin United States
Manufacturer Orlando Helicopter Airways
StatusProduction completed
Number builtone
Developed from Travel Air 2000

The Deland Travel Air 2000 is an American homebuilt aircraft that was designed and produced by Orlando Helicopter Airways, an aircraft maintenance and repair company located in DeLand, Florida. When it was available the aircraft was supplied as a kit for amateur construction and marketed under the "Deland" brand, named for the company's location. Plans were also available. [1]

Contents

Design and development

The Deland Travel Air 2000 was developed from the original 1920s vintage Travel Air 2000, with the incorporation of numerous airframe improvements and the use of a modern engine.

The aircraft features an interplane strut, cabane strut and cable-braced biplane layout, a three-seat open cockpit, with two passengers accommodated in side-by-side configuration in the front open cockpit and the pilot in the rear cockpit with a windshield. The aircraft has fixed conventional landing gear and a single engine in tractor configuration. [1]

The Deland Travel Air 2000 is made from a combination of metal and wood, all covered in doped aircraft fabric. Its 34.70 ft (10.6 m) span wing has a wing area of 296.0 sq ft (27.50 m2). The standard engine used is the 300 hp (224 kW) Thrust Mark VI powerplant. [1]

The aircraft has a typical empty weight of 1,450 lb (660 kg) and a gross weight of 2,590 lb (1,170 kg), giving a useful load of 1,140 lb (520 kg). With full fuel of 30 U.S. gallons (110 L; 25 imp gal) the payload for the pilot, passengers and baggage is 960 lb (440 kg). [1]

The standard day, sea level, no-wind takeoff and landing roll with a 300 hp (224 kW) engine is 200 ft (61 m). [1]

Operational history

By 1998 the company reported that one kit had been sold, completed and was flying. [1]

Specifications (Deland Travel Air 2000)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The Butterfly Banty, also called the Kimbrel Banty for its designer, is an American homebuilt ultralight aircraft that was designed by Mike Kimbrel and produced by Butterfly Aero of Oakville, Washington, introduced in 1984. The aircraft was supplied in the form of plans for amateur construction.

Collins Dipper American homebuilt aircraft

The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.

Culp Special American homebuilt aircraft

The Culp Special is an American aerobatic homebuilt aircraft designed and produced by Culp's Specialties of Shreveport, Louisiana. The aircraft is supplied as a kit or in the form of plans for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

Frontier MD-II American homebuilt aircraft

The Frontier MD-II was an American homebuilt aircraft that was designed and supplied as a kit by Frontier Aircraft Inc of Vail, Colorado, introduced in the 1990s.

The Henderson Little Bear is an American homebuilt aircraft that was designed and produced by Henderson Aero Specialities of Felton, Delaware, introduced in 1993. The aircraft is a replica of the Piper J-3 Cub. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The Las Brisas Mohawk is an American homebuilt aircraft that was designed and produced by Las Brisas Sales of Ozark, Missouri. When it was available the aircraft was supplied in the form of plans for amateur construction.

Letov ST-4 Aztek

The Letov ST-4 Aztek is a Czech microlight aircraft that was designed and produced by Letov Kbely of Prague - Letňany, in the 1990s. When it was available, the aircraft was supplied as a complete ready-to-fly aircraft, or as a kit for amateur construction.

Hatz Classic American homebuilt biplane

The Hatz Classic is an American homebuilt biplane, designed by Billy Dawson and produced by the Makelan Corporation of New Braunfels, Texas. The aircraft is supplied as a kit or, alternatively, in the form of plans for amateur construction.

The NWT Spruce Coupe is an American homebuilt aircraft that was designed and produced by NWT Co of Charleston, Maine. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Progressive Aerodyne Stingray is an American homebuilt flying boat that was designed by and produced by Progressive Aerodyne of Orlando, Florida, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

The St Croix Pietenopol Aircamper is an American homebuilt aircraft, an adaptation of the classic 1920s Pietenpol Air Camper, re-designed by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a partial kit and in the form of plans for amateur construction.

The St Croix Sopwith Triplane is an American homebuilt aircraft that was designed and produced by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. The aircraft is a full-size replica of the 1916 Sopwith Triplane fighter aircraft.

The Washington T-411 Wolverine is an American homebuilt aircraft that was produced by Washington Aeroprogress of Seattle, Washington, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

Bede BD-12 American homebuilt airplane

The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.

The V-STOL Pairadigm is an American twin-engine center-line thrust STOL homebuilt aircraft that was designed and produced by V-STOL Aircraft Corporation of Fort Myers, Florida, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 215. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.