Depth-of-field adapter

Last updated July 02, 2024

A depth-of-field adapter (often shortened to DOF adapter) is used to achieve shallow depth of field on a video camera whose fixed lens or interchangeable lens selection is limited or economically prohibitive at providing such an effect. A DOF adapter could theoretically be used on a multitude of platforms, although it is most useful on prosumer digital camcorders where high resolution is a capability but the sensor size is still small enough to elicit use of the adapter. The term 35mm adapter is common, since most designs use a focusing screen the size of a 35mm film frame (24×36 mm) and interface with lenses designed for 35mm cameras. The use of adapters has decreased largely due to the video function available on newer DSLR cameras. DOF adapters have been developed for use with smartphones, allowing DSLR lenses to be used with phone cameras.^[1]

How it works

A DOF adapter focuses an image onto a translucent screen (similar to how one would look at a focused image through a system camera's viewfinder) located between an external lens and the camera's main lens. The camcorder can frame this intermediate screen by focusing in macro mode. The principle is similar to pointing a video camera at a movie screen. The lens attached to the adapter now takes the job of the camcorder's focusing and aperture mechanisms. The camcorder's only responsibility at this point is to record what is being projected onto the focusing screen (called back focus.)

Limitations

A DOF adapter comes with a few limitations. First is the inherent light loss that comes with attaching the unit to the front of the camera. Using any one of these adapters requires that the scene being shot by the camera be adequately lit.

Static (non-moving) adapters suffer greater image degradation from low-light situations because the texture on the focusing screen becomes more noticeable. The camcorder used in conjunction with the adapter must focus on the focusing screen inside the adapter which is used as a projection surface. As a result, the camcorder also picks up the pits, dimples and/or specks in the material that give it its translucent properties. The solution to this problem is to shake, rotate or otherwise move the focusing screen so that the texture of the screen is blurred. In a non-static solution such as this, the texture is only a problem at very high shutter speeds, where blurring is reduced.

Vignetting, barrel distortion and chromatic aberration are also problems that are difficult to eradicate. The optics within the adapter must be of high quality and at the correct distance from each other to minimize these issues.

Image orientation is also an issue. The adapter, like any other lens, flips the image upside-down. To help address this issue while filming, an external monitor such as a small LCD screen may be mounted upside down to view the image in its correct orientation. Some LCD screens feature both mirror and flip options that correctly orient the image (flip vertically and mirror horizontally). In either case, the actual recorded footage must still be rotated 180 degrees in post-production. The one exception to this is the option to mount the camera upside down. This will allow the camera to record an upright image. However the camera LCD will still flip the image, and an external LCD monitor is still required.

Another option is to use a flip module. A flip module is yet another addition to the 35mm adapter construction set that is made up of a series of mirrors or prisms that literally "flip" the image while shooting. This avoids the burden of needing an external LCD monitor, but at the cost of additional light loss. Many adapters already have a flip module within them, so the filmmakers do not have to worry about flipping the image in post-production.

Construction

A basic DOF adapter usually has four components: a macro lens, an optional plano-convex lens, a translucent focusing screen, and finally a photographic lens of the user's choice. On camcorders without sufficient macro capability, a macro lens, preferably an achromatic doublet (to minimize chromatic aberration), is usually attached directly to the camcorder so that the camcorder can zoom in and focus on the focusing screen. Without the macro lens, certain camcorders would be unable to zoom in well enough to frame the entire focusing screen and still achieve sharp focus. The optional plano-convex lens is used to avoid vignetting in the image. The focusing screen is where the photographic lens image is projected. The screen must be placed at precisely the correct distance from the flange focal mount of whatever lens is being used (most popularly the Canon FD or Nikon F mount), referred to as the flange back distance. Finally, the front lens is a photographic or cinema lens that projects the image desired onto the focusing screen.

Price

The price of a DOF adapter ranges from tens of thousands of US dollars for a professional solution to less than a hundred by using parts available from a local hardware store. The pricing of a DOF adapter unit also depends on the material and technologies used. For instance, a relay lens system must be added if the adapter is to be directly mounted to a camera's body (bypassing the standard lens, as if on a Canon XL1 or XL2 and the Sony EX3). Also, a prism system that is used on some adapters that correctly reorients the image rightside-up adds to the cost.

Related Research Articles

A camera lens is an optical lens or assembly of lenses used in conjunction with a camera body and mechanism to make images of objects either on photographic film or on other media capable of storing an image chemically or electronically.

A digital single-lens reflex camera is a digital camera that combines the optics and mechanisms of a single-lens reflex camera with a solid-state image sensor and digitally records the images from the sensor.

The Canon FD lens mount is a physical standard for connecting a photographic lens to a 35mm single-lens reflex camera body. The standard was developed by Canon of Japan and was introduced in March 1971 with the Canon F-1 camera. It served as the Canon SLR interchangeable lens mounting system until the 1987 introduction of the Canon EOS series cameras, which use the newer EF lens mount. The FD mount lingered through the release of the 1990 Canon T60, the last camera introduced in the FD system, and the end of the Canon New F-1 product cycle in 1992.

The Canon PowerShot G is a series of digital cameras introduced by Canon in its PowerShot line in 2000. The G series cameras are Canon's flagship compact models aimed at photography enthusiasts desiring more flexibility than a typical point-and-shoot without the bulk of a digital single-lens reflex camera.

A stereo camera is a type of camera with two or more lenses with a separate image sensor or film frame for each lens. This allows the camera to simulate human binocular vision, and therefore gives it the ability to capture three-dimensional images, a process known as stereo photography. Stereo cameras may be used for making stereoviews and 3D pictures for movies, or for range imaging. The distance between the lenses in a typical stereo camera is about the distance between one's eyes and is about 6.35 cm, though a longer base line produces more extreme 3-dimensionality.

Lensbaby is a line of camera lenses for DSLR and mirrorless cameras that combine a simple lens with a bellows or ball and socket mechanism for use in special effect photography. A Lensbaby can give effects normally associated with view cameras. The lenses are for use in selective focus photography and bokeh effects.

The Minolta Vectis S-series comprises two APS system models of film SLR cameras made by Minolta, the flagship model Vectis S-1 and the Vectis S-100. The cameras feature a compact design, owing to the use of mirrors instead of prisms in the viewfinder.

The Nikon F-mount is a type of interchangeable lens mount developed by Nikon for its 35mm format single-lens reflex cameras. The F-mount was first introduced on the Nikon F camera in 1959, and features a three-lug bayonet mount with a 44 mm throat and a flange to focal plane distance of 46.5 mm. The company continues, with the 2020 D6 model, to use variations of the same lens mount specification for its film and digital SLR cameras.

Sony α is a brand of digital camera. This line has been active since 2006, building upon the Konica Minolta camera technologies, whose assets were acquired by Sony.

<span class="mw-page-title-main">Tilted plane focus</span> Camera focus technique

Tilted plane photography is a method of employing focus as a descriptive, narrative or symbolic artistic device. It is distinct from the more simple uses of selective focus which highlight or emphasise a single point in an image, create an atmospheric bokeh, or miniaturise an obliquely-viewed landscape. In this method the photographer is consciously using the camera to focus on several points in the image at once while de-focussing others, thus making conceptual connections between these points.

The Micro Four Thirds system is a standard released by Olympus Imaging Corporation and Panasonic in 2008, for the design and development of mirrorless interchangeable lens digital cameras, camcorders and lenses. Camera bodies are available from Blackmagic, DJI, JVC, Kodak, Olympus, OM System, Panasonic, Sharp, and Xiaomi. MFT lenses are produced by Cosina Voigtländer, Kowa, Kodak, Mitakon, Olympus, Panasonic, Samyang, Sharp, Sigma, SLR Magic, Tamron, Tokina, TTArtisan, Veydra, Xiaomi, Laowa, Yongnuo, Zonlai, Lensbaby, Venus Optics and 7artisans amongst others.

The Samsung NX-mount is the lens mount used on NX series mirrorless interchangeable lens cameras by Samsung. The mount was first implemented in the Samsung NX10, and Samsung initially referred to the NX line as 'hybrid digital cameras', citing their combination of attributes of both DSLR and compact cameras.

The E-mount is a lens mount designed by Sony for their NEX and ILCE series of camcorders and mirrorless cameras. The E-mount supplements Sony's α mount, allowing the company to develop more compact imaging devices while maintaining compatibility with 35mm sensors. E-mount achieves this by:

The Panasonic Lumix DMC-G3 is a digital mirrorless interchangeable lens camera adhering to the joint Olympus and Panasonic Micro Four Thirds System (MFT) system design standard. The Panasonic Lumix DMC-G3 is the eighth Panasonic MFT camera introduced under the standard and the thirteenth model MFT camera introduced by either Olympus or Panasonic, as of the G3 product announcement date.

The Panasonic Lumix DMC-G2 is a digital mirrorless interchangeable lens camera that adheres to the Micro Four Thirds System (MFT) design standard developed by Olympus and Panasonic. It was announced by Panasonic in March 2010 along with the Lumix DMC-G10. The G2 was introduced as the successor to the Lumix DMC-G1 camera, with upgrades such as 720p high-definition video recording capability in AVCHD Lite and Motion JPEG formats.

The Olympus PEN E-P3 announced on 30 June 2011 is Olympus Corporation's seventh camera that adheres to the Micro Four Thirds (MFT) system design standard. The E-P3 succeeds the Olympus PEN E-P2, and was announced in concert with two other models, the Olympus PEN E-PL3, and the Olympus PEN E-PM1.

<span class="mw-page-title-main">Pentax 645</span> Camera model

The Pentax 645 is a medium format single-lens reflex system camera manufactured by Pentax. It was introduced in 1984, along with a complementary line of lenses. It captures images nominally 6 cm × 4.5 cm on 120, 220, and 70 mm film, though the actual size of the images is 56 mm × 41.5 mm.

The Pentax Q is a mirrorless interchangeable-lens camera introduced by Pentax on June 23, 2011.

In photography and videography, a lens adapter is a device that enables the use of camera and lens combinations from otherwise incompatible systems. The most simple lens adapter designs, passive lens adapters provide a secure physical connection between the camera and the lens. Some passive adapters may include a mechanism for manual iris control. So called, active lens adapters will include electronic connections, enabling communication between the lens and the camera.

The Nikon Z 7 is a 45.7 megapixel full-frame mirrorless interchangeable-lens camera produced by Nikon. The camera was officially announced on August 23, 2018, for release in September 2018. It was the first camera to use Nikon's new Z-mount system; the second model, released in November 2018, was the 24.5 megapixel Nikon Z 6.

References

↑ Kamps, Haje Jan (2017-01-07). "Beastgrip improves smartphone pics and vids with DOF adapter". TechCrunch. Retrieved 2024-07-02.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Kamps, Haje Jan (2017-01-07). "Beastgrip improves smartphone pics and vids with DOF adapter". TechCrunch. Retrieved 2024-07-02.

[1]