Diehl AeroNautical XTC Hydrolight

Last updated

XTC Hydrolight
Role Ultralight aircraft
National origin United States
Manufacturer Diehl AeroNautical
StatusProduction completed

The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s. [1]

Contents

Design and development

The XTC was the first amphibious flying boat to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 247 lb (112 kg). It features a cantilever mid-wing, a canard, dual vertical tails, a single-seat, open cockpit, re-positionable tricycle landing gear and a single engine in pusher configuration. [1]

The aircraft's hull is made from fiberglass, while the wing has a Kevlar-epoxy spar with its flying surfaces covered in bonded Mylar. Its 32 ft (9.8 m) span wing is located behind the cockpit. Some aircraft were delivered with optional enclosed cockpits for all-weather flying. The landing gear repositions clear of the hull for water landings and is sprung on all three wheels. The nose wheel is steerable. The control system is three-axis, with the canard for pitch, twin rudders for yaw and spoilers for roll control. The XTC is very aerodynamically clean and produces a 14:1 glide ratio. Strongly built, the aircraft is rated for +8/-8g. [1]

The standard engine supplied was the twin-cylinder, two-stroke, single ignition, horizontally opposed KFM 107 aircraft engine of 25 hp (19 kW). [1]

Operational history

In service many owners replaced the KFM 107 powerplant, as it left the aircraft underpowered, especially for water operations. Owners report that the XTC is pitch sensitive in flight. [1]

Specifications (XTC)

Data from Cliche [1]

General characteristics

Performance

Related Research Articles

Milholland Legal Eagle American ultralight aircraft design

The Milholland Legal Eagle is an American high wing, strut-braced, single engine, tractor configuration, conventional landing gear-equipped ultralight aircraft that is available as plans from Better Half VW of Brookshire, Texas and also produced in kit form by J&N Bolding Enterprises of Baytown, Texas and intended for amateur construction.

The International Ultralight Banchee is an American ultralight aircraft designed by Brian Jensen, Gil Kinzie and Nick Nichols and produced by International Ultralight Aviation. The aircraft was supplied as a kit for amateur construction.

The Seahawk Condor is an American ultralight aircraft that was designed by Buddy Head, Bob Carswell and Dave French and produced by Seahawk Industries and later by Condor Aircraft. The aircraft was supplied as a kit for amateur construction.

The American Aerolights Eagle is an American ultralight aircraft that was produced by American Aerolights, introduced in 1975. The aircraft was supplied as a kit for amateur construction.

The Phase 3 Eclipse is an American ultralight aircraft that was designed by Bruce Emmons and produced by Phase 3 Aircraft. The aircraft was supplied as a kit for amateur construction.

The Striplin F.L.A.C. is an American flying wing ultralight aircraft that was designed by Ken Striplin in 1977, first flying in October 1978. The aircraft was supplied as a kit for amateur construction.

The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.

The Striplin Lone Ranger is a family of American ultralight aircraft that was designed by Ken Striplin. The aircraft was supplied as a kit for amateur construction.

The Ultralight Flight Mirage is an American ultralight aircraft that was designed by Frank Riley and produced by Ultralight Flight Inc. The aircraft was supplied as a kit for amateur construction.

The Mitchell Wing P-38, also called the Lightning, is an American ultralight aircraft that was designed by Jim Mead and produced by Mitchell Aircraft Corporation. The aircraft was supplied as a kit for amateur construction.

The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.

The Bell Sidewinder is an American ultralight aircraft, supplied as a kit for amateur construction.

The Swallow Aeroplane Company Swallow is a series of American ultralight aircraft that was designed by Chet Fudge and produced by the Swallow Aeroplane Company in the 1980s. The aircraft was supplied as a kit for amateur construction.

The Teratorn T/A is an American ultralight aircraft that was designed and produced by Teratorn Aircraft. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.

The Cloudbaser Trikes Cloudbaser is a flying wing ultralight trike that was designed and produced by Cloudbaser Trikes. The aircraft was supplied as a kit and was also available as plans for amateur construction.

The J & J Ultralights Tukan is an American ultralight trike that was marketed by J & J Ultralights, Leading Edge Air Foils and Kemmeries Aviation. The aircraft was supplied as a kit, as parts and as plans for amateur construction.

The Concept Prowler is an American flying wing ultralight trike that was designed and produced by Concept Aviation of Knoxville, Tennessee.

The Flying Machines FM301 Stream, is a Czech ultralight trike, designed by and produced by Flying Machines s.r.o. of Rasošky. The aircraft is supplied as a complete ready-to-fly-aircraft.

References

  1. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-46. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4