This article contains content that is written like an advertisement .(February 2021) |
dr5, or dr5 Chrome, is a reversal black and white process, through which most kinds of black-and-white negative films produce transparencies (slides). The dr5 process is a chemical reversal process, rather than the standard, light-based reversal for black and white transparency (slide). [1] It was developed by photographer and photographic chemist David Wood. [1] He stated that dr5 gives the photographer the ability to have a B&W darkroom in-camera, enabling a final thought out exposure, the original as seen or envisioned by the artist.
The "dr5 process" is the fifth incarnation of the process, derived by experimentation by Wood from 1989 through 1991. Though reversal film processing was well known throughout photographic history, the dr5 process is proprietary. Privately performing the process alone until 1998, Wood afterward briefly teamed with A&I Color Lab [2] in Los Angeles CA, via their affiliate lab AIM. [3]
The dr5 process won best new product in 1999 at the '99 Photo Expo-Plus Expo Review. [4] [5]
In August 2001, Wood opened an independent lab, that used a processor made for dr5 specifications by Tecnolab [6] in Italy.
A photograph is an image created by light falling on a photosensitive surface, usually photographic film or an electronic image sensor, such as a CCD or a CMOS chip. Most photographs are now created using a smartphone/camera, which uses a lens to focus the scene's visible wavelengths of light into a reproduction of what the human eye would see. The process and practice of creating such images is called photography.
Kodachrome is the brand name for a color reversal film introduced by Eastman Kodak in 1935. It was one of the first successful color materials and was used for both cinematography and still photography. For many years Kodachrome was widely used for professional color photography, especially for images intended for publication in print media.
In photography, reversal film or slide film is a type of photographic film that produces a positive image on a transparent base. Instead of negatives and prints, reversal film is processed to produce transparencies or diapositives. Reversal film is produced in various sizes, from 35 mm to roll film to 8×10 inch sheet film.
The E-6 process is a chromogenic photographic process for developing Ektachrome, Fujichrome and other color reversal photographic film.
In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because the extremely light-sensitive chemicals a camera film must use to capture an image quickly enough for ordinary picture-taking are darkened, rather than bleached, by exposure to light and subsequent photographic processing.
Color photography is photography that uses media capable of capturing and reproducing colors. By contrast, black-and-white or gray-monochrome photography records only a single channel of luminance (brightness) and uses media capable only of showing shades of gray.
Photographic printing is the process of producing a final image on paper for viewing, using chemically sensitized paper. The paper is exposed to a photographic negative, a positive transparency , or a digital image file projected using an enlarger or digital exposure unit such as a LightJet or Minilab printer. Alternatively, the negative or transparency may be placed atop the paper and directly exposed, creating a contact print. Digital photographs are commonly printed on plain paper, for example by a color printer, but this is not considered "photographic printing".
Instant film is a type of photographic film that was introduced by Polaroid Corporation to produce a visible image within minutes or seconds of the photograph's exposure. The film contains the chemicals needed for developing and fixing the photograph, and the camera exposes and initiates the developing process after a photo has been taken.
In infrared photography, the film or image sensor used is sensitive to infrared light. The part of the spectrum used is referred to as near-infrared to distinguish it from far-infrared, which is the domain of thermal imaging. Wavelengths used for photography range from about 700 nm to about 900 nm. Film is usually sensitive to visible light too, so an infrared-passing filter is used; this lets infrared (IR) light pass through to the camera, but blocks all or most of the visible light spectrum.
Cross processing is the deliberate processing of photographic film in a chemical solution intended for a different type of film. The effect was discovered independently by many different photographers often by mistake in the days of C-22 and E-4. Color cross processed photographs are often characterized by unnatural colors and high contrast. The results of cross processing differ from case to case, as the results are determined by many factors such as the make and type of the film used, the amount of light exposed onto the film and the chemical used to develop the film. Similar effects can also be achieved with digital filter effects.
Photo CD is a system designed by Kodak for digitizing and saving photos onto a CD. Launched in 1991, the discs were designed to hold nearly 100 high quality images, scanned prints and slides using special proprietary encoding. Photo CDs are defined in the Beige Book and conform to the CD-ROM XA and CD-i Bridge specifications as well. They were intended to play on CD-i players, Photo CD players, and any computer with a suitable software.
FILM Ferrania s.r.l. is a photographic film manufacturing company located in Ferrania (Liguria), Italy. Ferrania was founded in 1923 as a maker of photographic film, papers, and photographic equipment, including cameras. The company was purchased in 1964 by the 3M company to become Ferrania 3M, until it was spun off in 1996 to 3M's Imation division. In 1999, Ferrania was acquired by Schroder Ventures and then spun off as a separate company. Subsequently, it was acquired by a Genoese shipping company, Gruppo Messina who ceased photographic activities in 2009.
Harman Technology, trading as Ilford Photo, is a UK-based manufacturer of photographic materials known worldwide for its ILFORD branded black-and-white film, papers and chemicals. Historically it also published the Ilford Manual of Photography, a comprehensive manual of everything photographic, including the optics, physics and chemistry of photography, along with recipes for many developers.
A chromogenic print, also known as a C-print or C-type print, a silver halide print, or a dye coupler print, is a photographic print made from a color negative, transparency or digital image, and developed using a chromogenic process. They are composed of three layers of gelatin, each containing an emulsion of silver halide, which is used as a light-sensitive material, and a different dye coupler of subtractive color which together, when developed, form a full-color image.
Analog photography, also known as film photography, is a catch-all term for photography that uses chemical processes to capture an image, typically on paper, film or a hard plate. These analog processes were the only methods available to photographers for more than a century prior to the invention of digital photography, which uses electronic sensors to record images to digital media.
National Geographic Image Collection, a division of the National Geographic Partners, a joint venture between the National Geographic Society and The Walt Disney Company, headquartered in Washington, D.C., United States, was a stock photography agency that managed and licensed one of the world's most comprehensive and unique collections of photographs and original artwork. It maintained a collection of more than 10 million digital images, transparencies, black-and-white prints, early auto chromes, and pieces of original artwork.
Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.
{{cite web}}
: CS1 maint: bot: original URL status unknown (link)