Earthstar Thunder Gull

Last updated
Earthstar Thunder Gull
Earthstar Aircraft Thunder Gull Odyssey 02.jpg
Earthstar Thunder Gull Odyssey
Role Ultralight aircraft
National origin United States
Manufacturer Earthstar Aircraft
DesignerMark Beierle
First flightMarch 1987 (Thunder Gull)
Introduction1987 (Thunder Gull)
StatusIn production (2012)
Gull 2000 on skis Earthstar Aircraft Thunder Gull 2000 01.JPG
Gull 2000 on skis
Thunder Gull Odyssey Earthstar Thunder Gull Odyssey 01.JPG
Thunder Gull Odyssey
Thunder Gull Odyssey showing the unusual staggered side-by-side seating arrangement Earthstar Aircraft Thunder Gull Odyssey 03.jpg
Thunder Gull Odyssey showing the unusual staggered side-by-side seating arrangement

The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]

Contents

Design and development

Designer Mark Beierle's original goals were an "airplane with the feel of a hang glider, the agility and visibility of a helicopter, the effortless smooth flight of a sailplane, and the utility and economy of a general aviation aircraft--all in the hopes of getting close to the feel and freedom of a bird." When queried by interviewer Don Downie if that was too much to ask, Beierle replied, "You bet! But it didn't stop me from trying." [11]

The Thunder Gull was introduced in 1987 as a development of the earlier Laughing Gull. The aircraft was quite revolutionary when it was introduced due to its high performance and particularly high cruise speed of 55 mph (89 km/h) on just 28 hp (21 kW). [1]

The aircraft is constructed from aluminum tubing and sheet parts and covered in aircraft fabric. The aircraft can meet the requirements of the US FAR 103 Ultralight Vehicles category, including its maximum empty weight limitation of 254 lb (115 kg) when it is equipped with a lightweight engine. [1] [12]

The aircraft has a very small wing for the US ultralight category with a wing area of only 95 sq ft (8.8 m2) and a wingspan of 17.6 ft (5.4 m). The wing is equipped with flaps that give it a stall speed of 25 mph (40 km/h). The small wing gives the aircraft a high cruise speed and better resistance to turbulence than a lighter-loaded wing. The one-piece wing is quickly removable for storage or transport. [1] [3]

Reported construction time of the kit is 150 hours. [1]

Operational history

The prototype Laughing Gull was flown coast-to-coast across the USA seven times with 100 lb (45 kg) of baggage and a 180 lb (82 kg) pilot. [2]

Variants

Laughing Gull
Original model introduced in 1976. First models had wire bracing and later strut-bracing before development of the cantilever wing. Production completed. [2] [11]
Thunder Gull
Single-seat, high-wing ultralight aircraft with a cantilever 17.6 ft (5.4 m) wing. The name was changed from Laughing Gull for marketing purposes. Production completed. [1] [11]
Thunder Gull J
Improved model with 20 ft (6.1 m) wingspan. Standard engine is the 28 hp (21 kW) Rotax 277 and the acceptable power range is 28 to 53 hp (21 to 40 kW). First flight was March 1987 and it was available as a kit or ready-to-fly. Production completed. [2] [3] [4] [5]
Thunder Gull JT2
Two seats in tandem model with dual controls and a 24 ft (7.3 m) wingspan. Standard engine is the 50 hp (37 kW) Rotax 503 and the acceptable power range is 40 to 80 hp (30 to 60 kW). The 64 hp (48 kW) Rotax 582 and 75 hp (56 kW) Rotax 618 two-stroke engines were optional. It was available as a kit or ready-to-fly and production is completed. First flight was June 1989. [1] [2] [3] [4] [5]
Thunder Gull Odyssey
Two seats in an unusual staggered side-by-side configuration with dual controls in the form of a shared center stick and a 26 ft (7.9 m) wingspan. The staggered seating was used to provide most of the benefits of side-by-side seating without the associated drag penalty. The seat stagger is sufficient to provide pilot shoulder clearance. Standard engine is the 50 hp (37 kW) Rotax 503 and the acceptable power range is 40 to 80 hp (30 to 60 kW). The 60 hp (45 kW) HKS 700E has also been installed. It first flew in April 1995 and was introduced at Sun 'n Fun in 1995. It is available as a kit or ready-to-fly. Fifteen were reported completed by December 2011 and still in production in 2012. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [13] An electric aircraft version has been flown. [12]
Soaring Gull
Motorglider version with 28 ft (8.5 m) wingspan and 16:1 glide ratio. Standard engine was the 28 hp (21 kW) Rotax 277 and then later the 28 hp (21 kW) Hirth F-33. The acceptable power range is 28 to 53 hp (21 to 40 kW). First flew in November 1993. Ten reported as completed by December 2011 and still in production in 2012. [1] [2] [3] [4] [5] [7] [8] [9] [10] [13]
Gull 2000
Updated version with 20 ft (6.1 m) wingspan, wider cockpit enclosure built from fiberglass. Standard engine was the Zanzottera MZ 34 of 27 hp (20 kW) and then later the 28 hp (21 kW) Hirth F-33. The acceptable power range is 27 to 60 hp (20 to 45 kW). Fifteen reported as completed by December 2011 and still in production in 2012. [1] [4] [5] [6] [7] [8] [9] [10] [13]
eGull 2000
Electric powered variant
eGull 2000 in flight EGull2000Flight.jpg
eGull 2000 in flight
eGull 2000, an electric-powered variant EGull2000.jpg
eGull 2000, an electric-powered variant

Specifications (Thunder Gull)

Data from Cliche [1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.

<span class="mw-page-title-main">Chotia Weedhopper</span> American ultralight airplane

The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">Excalibur Aircraft Excalibur</span> American ultralight airplane

The Excalibur is an American two seats-in-tandem, high wing, pusher configuration ultralight aircraft that is manufactured in kit form for amateur construction, by Excalibur Aircraft of Sebring, Florida. It was introduced in 1993.

<span class="mw-page-title-main">Sorrell Hiperlight</span> American ultralight biplane

The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.

The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Golden Circle Air T-Bird</span> Type of aircraft

The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.

<span class="mw-page-title-main">Titan Tornado</span> American kit aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

<span class="mw-page-title-main">Bailey-Moyes Dragonfly</span> Type of aircraft

The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.

The Precision Tech Fergy F-II B is a two-seat side-by-side, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.

<span class="mw-page-title-main">SlipStream Genesis</span> Type of aircraft

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.

<span class="mw-page-title-main">Raj Hamsa X-Air</span> Type of aircraft

The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

The Apex Eco 6 is the first of a family of Czech single and two seat flying wing ultralight trikes that were designed and produced by To-Mi Aviation and later by Apex Aviation. The aircraft were supplied as kits for amateur construction.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-61 & B-107. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, pages 148 and 307. BAI Communications. ISBN   0-9636409-4-1
  3. 1 2 3 4 5 6 Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 44. Primedia Publications. ISSN 0891-1851
  4. 1 2 3 4 5 6 Downey, Julia: 2001 Kit Aircraft Directory, Kitplanes, Volume 17, Number 12, December 2000, page 44. Kitplanes Acquisition Company. ISSN 0891-1851
  5. 1 2 3 4 5 6 Downey, Julia: 2002 Kit Aircraft Directory, Kitplanes, Volume 18, Number 12, December 2001, pages 33-34. Kitplanes Acquisition Company. ISSN 0891-1851
  6. 1 2 3 Newby-Gonzalez, Tori: 2004 Kit Aircraft Directory, Kitplanes, Volume 20, Number 12, December 2003, page 65. Belvoir Publications. ISSN 0891-1851
  7. 1 2 3 4 Downey, Julia: 2005 Kit Aircraft Directory, Kitplanes, Volume 21, Number 12, December 2004, page 55. Belvoir Publications. ISSN 0891-1851
  8. 1 2 3 4 Downey, Julia: 2008 Kit Aircraft Directory, Kitplanes, Volume 24, Number 12, December 2007, page 49. Primedia Publications. ISSN 0891-1851
  9. 1 2 3 4 Earthstar Aircraft (n.d.). "Models" . Retrieved 25 January 2011.{{cite web}}: CS1 maint: year (link)
  10. 1 2 3 4 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 51. Belvoir Publications. ISSN 0891-1851
  11. 1 2 3 4 Downie, Don (June 2000). "The Gull Report.(flying building Ultralight aircraft personal narratives)". KitPlanes. Retrieved 26 January 2011.
  12. 1 2 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 44. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  13. 1 2 3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 43. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.