Eaves Cougar 1

Last updated

Cougar 1
Role Homebuilt aircraft
National origin United States
DesignerLeonard R. Eaves
Introduction1963
StatusPlans no longer available (2012)
Developed from Nesmith Cougar

The Eaves Cougar 1 is an American homebuilt aircraft that was designed by Leonard R. Eaves of Oklahoma City, Oklahoma and made available in the form of plans for amateur construction. [1]

Contents

Design and development

The Eaves Cougar 1 was based upon the Nesmith Cougar and features a strut-braced high wing, a two-seats-in-side-by-side configuration enclosed cockpit, fixed conventional landing gear and a single engine in tractor configuration. [1]

The aircraft is made from welded steel tubing and wood, covered in doped aircraft fabric. Its wing has a 23.25 ft (7.1 m) span and can be folded for storage or ground transportation. Engines used typically range from 85 to 125 hp (63 to 93 kW) but the airframe can accept engines as powerful as the 150 hp (112 kW) Lycoming O-320. [1]

The aircraft has an empty weight of 700 lb (320 kg) and a gross weight of 1,400 lb (640 kg), giving a useful load of 700 lb (320 kg). With full fuel of 35 U.S. gallons (130 L; 29 imp gal) the payload is 490 lb (220 kg). [1]

The construction of the prototype was commenced in January 1957 at Eaves' home in Oklahoma City. The design won third place in the 1963 Experimental Aircraft Association aircraft design competition. It was featured on the cover of Sport Aviation magazine in February 1963. [2]

Eaves was killed in the crash of another homebuilt aircraft design on 3 March 2012 at age 92 [2] and plans for the Cougar appear to be no longer available.

Specifications (Cougar 1)

Data from Plane and Pilot [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Bradley Aerobat</span> American homebuilt aircraft

The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Wickham B</span> Type of aircraft

The Wickham B is an American experimental twin engined, homebuilt aircraft.

<span class="mw-page-title-main">Airmotive EOS 001</span> American homebuilt aircraft

The Airmotive EOS 001 is an American homebuilt aircraft that was designed and produced by Airmotive Engineers of Pontiac, Michigan. The aircraft was supplied as a kit for amateur construction, but is no longer available.

The Harmon Der Donnerschlag is an American homebuilt aircraft that was designed and produced by Harmon Engineering of Howe, Texas. The aircraft was intended for amateur construction.

The Harris Geodetic LW 108 is an American homebuilt aircraft that was designed by J. Warren Harris of Vernal, Utah and made available in the form of plans for amateur construction.

The Southern Aeronautical Renegade is an American Formula V Air Racing homebuilt aircraft that was designed by Charles Lasher and produced by Southern Aeronautical Corporation of Miami Lakes, Florida. The aircraft was supplied in the form of plans for amateur construction, but the plans are apparently no longer available.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

<span class="mw-page-title-main">Aircraft Technologies Acro 1</span> American homebuilt airplane

The Aircraft Technologies Acro 1 is an American aerobatic homebuilt aircraft that was designed by Fred Meyer and produced by Aircraft Technologies of Lilburn, Georgia. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. Neither plans nor kits are available anymore and the aircraft is out of production.

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The Amax Vixen 105 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Elmwood Christavia Mk IV</span> Canadian homebuilt light aircraft

The Christavia Mk IV (Christ-in-Aviation) is a Canadian homebuilt aircraft that was designed by Ron Mason and produced by Elmwood Aviation of Frankford, Ontario. The aircraft is supplied in the form of plans for amateur construction.

<span class="mw-page-title-main">Collins Dipper</span> American homebuilt aircraft

The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.

The Duane's Hangar Ultrababy is an American homebuilt aircraft that was designed by Duane Patrick and produced by Duane's Hangar of Liberty, South Carolina, introduced about 1997. When it was available the aircraft was supplied in the form of plans for amateur construction.

The Henderson Little Bear is an American homebuilt aircraft that was designed and produced by Henderson Aero Specialities of Felton, Delaware, introduced in 1993. The aircraft is a replica of the Piper J-3 Cub. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

<span class="mw-page-title-main">Olympic Desert Eagle</span> American homebuilt aircraft

The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Wille and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

<span class="mw-page-title-main">Stewart S-51D Mustang</span> American homebuilt fighter replica

The Stewart S-51D Mustang is an American aerobatic homebuilt aircraft that was designed by Jim Stewart and produced by Stewart 51 of Vero Beach, Florida, introduced in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Warner Revolution II</span> American homebuilt aircraft

The Warner Revolution II, also marketed as the Space Walker II, is an American homebuilt aircraft that was designed and produced by Warner Aerocraft of Seminole, Florida. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL Pairadigm is an American twin-engine center-line thrust STOL homebuilt aircraft that was designed and produced by V-STOL Aircraft Corporation of Fort Myers, Florida, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 Plane and Pilot: 1978 Aircraft Directory, page 140. Werner & Werner Corp, Santa Monica CA, 1977. ISBN   0-918312-00-0
  2. 1 2 Sargent, Sparky Barnes (March 6, 2012). "EAA Mourns Loss of Leonard Eaves". Experimental Aircraft Association . Archived from the original on October 5, 2013. Retrieved October 4, 2013.