Edge mill

Last updated
Edge runners in an oil mill Oelmuehle.JPG
Edge runners in an oil mill

An edge mill is a mill used for crushing or grinding in which stones roll around on their edges on a level circular bed. They were developed in China in the third century and are still used today in remote villages around the world. When the millstones were replaced with iron or steel disks in the 19th century, the mills were known as Chilean mills. [1]

It is used for milling ore and as an oil mill. [2] Horse or oxen-driven versions were used in pre–industrial revolution America as bark mills to shred tree bark to derive tannins for the leather industry. [ citation needed ]

Related Research Articles

<span class="mw-page-title-main">Gritstone</span> Hard, coarse-grained, siliceous sandstone

Gritstone or grit is a hard, coarse-grained, siliceous sandstone. This term is especially applied to such sandstones that are quarried for building material. British gritstone was used for millstones to mill flour, to grind wood into pulp for paper and for grindstones to sharpen blades. "Grit" is often applied to sandstones composed of angular sand grains. It may commonly contain small pebbles.

<span class="mw-page-title-main">Watermill</span> Structure that uses a water wheel or turbine

A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of many material goods, including flour, lumber, paper, textiles, and many metal products. These watermills may comprise gristmills, sawmills, paper mills, textile mills, hammermills, trip hammering mills, rolling mills, and wire drawing mills.

<span class="mw-page-title-main">Millstone</span> Stones used in gristmills, for grinding wheat or other grains

Millstones or mill stones are stones used in gristmills, used for triturating, crushing or, more specifically, grinding wheat or other grains. They are sometimes referred to as grindstones or grinding stones.

<span class="mw-page-title-main">Quern-stone</span> Stone tools for hand–grinding

Quern-stones are stone tools for hand-grinding a wide variety of materials, especially for various types of grains. They are used in pairs. The lower stationary stone of early examples is called a saddle quern, while the upper mobile stone is called a muller, rubber, or handstone. The upper stone was moved in a back-and-forth motion across the saddle quern. Later querns are known as rotary querns. The central hole of a rotary quern is called the eye, and a dish in the upper surface is known as the hopper. A handle slot contained a handle which enabled the rotary quern to be rotated. They were first used in the Neolithic era to grind cereals into flour.

<span class="mw-page-title-main">Three Mills</span> Human settlement in England

The Three Mills are former working mills and an island of the same name on the River Lea. It is one of London’s oldest surviving industrial centres. The mills lie in the London Borough of Newham, but despite lying on the Newham side of the Lea, access is principally from the western, London Borough of Tower Hamlets, side of the river.

<span class="mw-page-title-main">Mill (grinding)</span> Device that breaks solid materials into smaller pieces by grinding, crushing, or cutting

A mill is a device, often a structure, machine or kitchen appliance, that breaks solid materials into smaller pieces by grinding, crushing, or cutting. Such comminution is an important unit operation in many processes. There are many different types of mills and many types of materials processed in them. Historically mills were powered by hand or by animals, working animal, wind (windmill) or water (watermill). In modern era, they are usually powered by electricity.

<span class="mw-page-title-main">Millstone Grit</span>

Millstone Grit is the name given to any of a number of coarse-grained sandstones of Carboniferous age which occur in the British Isles. The name derives from its use in earlier times as a source of millstones for use principally in watermills. Geologists refer to the whole suite of rocks that encompass the individual limestone beds and the intervening mudstones as the Millstone Grit Group. The term Millstone Grit Series was formerly used to refer to the rocks now included within the Millstone Grit Group together with the underlying Edale Shale Group.

<span class="mw-page-title-main">Dalgarven Mill – Museum of Ayrshire Country Life and Costume</span>

Dalgarven Mill is near Kilwinning, in the Garnock Valley, North Ayrshire, Scotland and it is home to the Museum of Ayrshire Country Life and Costume. The watermill has been completely restored over a number of years and is run by the independent Dalgarven Mill Trust.

<span class="mw-page-title-main">Green's Mill, Sneinton</span>

Green's Windmill is a restored and working 19th-century tower windmill in Sneinton, Nottingham. Built in the early 1800s for the milling of wheat into flour, it remained in use until the 1860s. It was renovated in the 1980s and is now part of a science centre, which together have become a local tourist attraction.

<span class="mw-page-title-main">Ashton Windmill</span>

Ashton windmill is a tower mill in Chapel Allerton, Somerset, England. Its tower is over 7.5 metres (25 ft) high with stone walls that are 60 cm (2.0 ft) thick. The sails are 13 m (43 ft) across and used to be covered with canvas. The last millstones were 1.2 m (3.9 ft) across and the millstones used to grind wheat for flour and beans for cattle food.

<span class="mw-page-title-main">Hazewind, Gieten</span>

Hazewind is a smock mill in Gieten, Drenthe, Netherlands. It was built in 1833 and has been restored to working order. The mill is listed as a Rijksmonument, number 16126.

<span class="mw-page-title-main">Podlipoglav</span> Place in Lower Carniola, Slovenia

Podlipoglav is a village in the City Municipality of Ljubljana in central Slovenia. The area is part of the traditional region of Lower Carniola and is now included with the rest of the municipality in the Central Slovenia Statistical Region.

<span class="mw-page-title-main">Bark mill</span>

Bark mills, also known as Catskill's mills, are water, steam, horse, ox or wind-powered edge mills used to process the bark, roots, and branches of various tree species into a fine powder known as tanbark, used for tanning leather. This powdering allowed the tannin to be extracted more efficiently from its woody source material. A barker would strip the bark from trees so that it might be ground in such mills, and the dried bark was often stored in bark houses.

<span class="mw-page-title-main">Oil mill</span>

An oil mill is a grinding mill designed to crush or bruise oil-bearing seeds, such as linseed or peanuts, or other oil-rich vegetable material, such as olives or the fruit of the oil palm, which can then be pressed to extract vegetable oils, which may be used as foods or for cooking, as oleochemical feedstocks, as lubricants, or as biofuels. The pomace or press cake – the remaining solid material from which the oil has been extracted – may also be used as a food or fertilizer.

<span class="mw-page-title-main">Gristmill</span> Apparatus that grinds grain into flour

A gristmill grinds cereal grain into flour and middlings. The term can refer to either the grinding mechanism or the building that holds it. Grist is grain that has been separated from its chaff in preparation for grinding.

<span class="mw-page-title-main">De Hoop, Ouddorp</span> Dutch windmill

De Hoop ("Hope") is a flour windmill in Ouddorp built in 1845 and fully renovated in 1984. It is one of the few windmills in the Netherlands that is still privately owned, and is still in full commercial operation.

<span class="mw-page-title-main">De Akkermolen</span> Dutch monumental windmill

De Akkermolen is a 17th-century windmill in Zundert, Netherlands. Built around 1605 to replace an earlier windmill, it was used as a gristmill until it was severely damaged in 1950. The mill was bought by the local government and restored in 1961, and it was listed as a national heritage site in 1974.

<span class="mw-page-title-main">Watermill at Opwetten</span> Watermill in Nuenen, Netherlands

The Watermill at Opwetten is a watermill along the river Kleine Dommel, located on the Opwettenseweg 203 in Opwetten, Nuenen, Gerwen en Nederwetten, in the province of North Brabant, Netherlands. First mentioned in the 11th century, the watermill burned down and was rebuilt in 1764.

<span class="mw-page-title-main">Munnekezijlstermolen, Munnekezijl</span>

The Munnekezijlstermolen is a smock mill in Munnekezijl, Friesland, Netherlands which was built in 1856 and is in working order. The mill is listed as a Rijksmonument.

<span class="mw-page-title-main">De Kroon, Arnhem</span> Dutch windmill

De Kroon or the Klarendalse Molen is a tower mill in Arnhem, Gelderland, Netherlands which was built in 1870 and is in working order. The mill is listed as a Rijksmonument.

References

  1. Alban J. Lynch, Chester A. Rowland (2005), The History of Grinding, SME, pp. 78–80, ISBN   9780873352383
  2. "Edge mill". TheFreeDictionary.com. Retrieved 2019-05-08.