ElectraFlyer-X | |
---|---|
The prototype ElectraFlyer-X | |
Role | Homebuilt and light-sport electric aircraft |
National origin | United States |
Manufacturer | Electric Aircraft Corporation |
Designer | Randall Fishman |
Introduction | 2009 |
Status | Under development |
Number built | one |
Developed from | Electric Aircraft Corporation ElectraFlyer-C |
The Electric Aircraft Corporation ElectraFlyer-X is an American kit and light-sport electric aircraft, designed by Randall Fishman and at one time under development by his company Electric Aircraft Corporation of Cliffside Park, New Jersey. The ElectraFlyer-X was introduced at AirVenture in 2009. The aircraft is intended to be supplied as a kit for amateur construction or as a complete ready-to-fly aircraft. [1] [2]
By February 2017 the design was no longer featured on the company website. [3]
The ElectraFlyer-X was designed to comply with the US light-sport aircraft (LSA) rules. The current LSA rules do not allow any powerplants except reciprocating engines for Special-LSAs (S-LSAs), but Fishman hopes that the rules will be amended in time. In the meantime the aircraft can be constructed in the Experimental - Amateur Built or Experimental-LSA (E-LSA) categories. [1] [2] [4]
The aircraft features a cantilever low wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear and a single electric engine in tractor configuration. [1] [2]
The ElectraFlyer-X is made from composites. Its long 15 m (49.2 ft) span wing features a high aspect ratio for aerodynamic efficiency. The engine is an Electric Aircraft Corporation 50 hp (37 kW) brushless, liquid-cooled powerplant designed specifically for the aircraft. The engine is driven by air-cooled battery packs that are fitted in stainless steel boxes and can be installed in either the engine compartment or the cabin. The batteries will permit flights of up to three hours duration. [1] [2]
In 2015 the projected price for a kit, less batteries, was to be US$65,000. The batteries were estimated to add US$15,000 to the cost. [1] [2]
In April 2010 the aircraft's first flight was predicted for May or June 2010. Series production was originally intended for 2010 and then delayed to 2011. By June 2012 there was no indication that the design had actually flown or that it would be produced in the near future. In June 2012 the company website listed it only as "coming soon", however the aircraft's description page had been removed. The US Federal Aviation Administration indicates that the prototype aircraft, N600EL, was registered on 15 July 2009 and had its registration cancelled on 31 May 2012. [1] [3] [5] [6]
Fishman has indicated that the late 2000s recession caused development of company products to be delayed. In 2011 Fishman said, "The recession has made this not a great business right now". [7]
Data from Bayerl [1]
General characteristics
Performance
The Kappa 77 KP-2U Sova, later produced as the Jihlavan KP-2U Skyleader and most recently as the Jihlavan Skyleader, is a two-seat civil utility aircraft designed in the Czech Republic and available in kit form for home building. It is a conventional low-wing monoplane featuring all-metal construction and tricycle undercarriage.
The Sonex, Waiex and Xenos are a family of lightweight, metal, low-wing, two seat homebuilt aircraft. Kits are produced and marketed by Sonex Aircraft, a small manufacturer based in Oshkosh, Wisconsin. By 2014, 500 customer built aircraft had been completed. The Sonex can also be built from plans.
The Zenith STOL CH 701 and CH 750 are a family of light, two-place kit-built STOL aircraft designed by Canadian aeronautical engineer Chris Heintz through his Midland, Ontario based company, Zenair. The CH 701 first flew in 1986 and the design is still in production. The CH 750 was first introduced in 2008. The CH 701 was later developed into the four-place Zenith STOL CH 801.
The Van's RV-12 is an American two-seat, single-engine, low-wing homebuilt airplane eligible for the U.S. E-LSA category, sold in kit form and as a complete ready-to-fly aircraft by Van's Aircraft of Aurora, Oregon.
The Electric Aircraft Corporation ElectraFlyer Trike is an ultralight trike fitted with an electric motor, instead of a traditional gasoline engine.
The Yuneec International E430 is a Chinese two-seat electric aircraft that was designed for commercial production by electric model aircraft manufacturer Yuneec International. The first flight of the E430 took place from the Yuneec factory near Shanghai, China on June 12, 2009.
The Pipistrel Virus is a two-seat, single engine light aircraft, manufactured by Pipistrel in Slovenia and Italy, and sold as an ultralight, homebuilt kit, or light-sport aircraft.
Electric Aircraft Corporation is an American aircraft manufacturer that was founded by Randall Fishman, a retired New Jersey jeweler. The company is based in Cliffside Park, New Jersey and specializes in the design and manufacture of electric aircraft under the ElectraFlyer brand name.
The Flight Design MC is a German light-sport aircraft, designed and produced by Flight Design, introduced at AirVenture in 2008. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Falcon LS is a two-seat, low wing, light sport aircraft originally produced by Corvus Aircraft in Hungary as the Corvus Phantom and imported into the US by T&T Aviation between 2008–2010 and by Renegade Light Sport 2010–present.
The Pipistrel Alpha Trainer is a Slovenian two-seat, single-engine light-sport aircraft intended specifically for flight training, designed and produced by Pipistrel in Gorizia, Italy.
The Aurore MB 02 Souricette is a French ultralight aircraft, designed by Michel Barry and produced by Aurore Sarl of Sauvagnon. The aircraft is supplied as a kit or as plans for amateur construction.
The Electric Aircraft Corporation ElectraFlyer-C is an American experimental electric aircraft that was designed by Randall Fishman and produced by his company Electric Aircraft Corporation in 2008. The aircraft is a converted Monnett Moni motor glider intended to test electric propulsion technology for the future Electric Aircraft Corporation ElectraFlyer-X.
The FlyNano Nano is a Finnish electric single seat seaplane, designed by Aki Suokas and produced by FlyNano of Lahti. It was introduced at AERO Friedrichshafen in 2011 and the prototype Proto version first flew on 11 June 2012. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Foxcon Terrier 200 is an Australian light-sport aircraft, designed and produced by Foxcon Aviation of Mackay, Queensland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The SAB C-100 Vulcan is an Italian ultralight and light-sport aircraft produced by SAB Aviation of Benevento. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The APEV Pouchelec is a French amateur-built electric aircraft, that was designed by Daniel Dalby and produced by APEV of Peynier. When it was available the aircraft was supplied as plans or as a kit for amateur construction.
The Samson Switchblade is an American amateur-built roadable aircraft, under development by Samson Motorworks of Meadow Vista, California. It was publicly introduced at AirVenture in 2009 in mock-up form. The aircraft is intended to be supplied as a kit for amateur construction initially and possibly as a complete ready-to-fly-aircraft in the future.
The Aeromarine Merlin is an American homebuilt aircraft that was designed by Czech Aircraft Works and is produced by Aeromarine LSA of South Lakeland Airport, Florida, introduced at the Sport Aviation Expo in 2016. The aircraft is supplied as a kit, for amateur construction.
The Electric Aircraft Corporation ElectraFlyer-ULS is an American electric ultralight motor glider, designed by Randell Fishman and produced by the Electric Aircraft Corporation of Cliffside Park, New Jersey, introduced in late 2012. The aircraft is supplied complete and ready-to-fly.