Elizabeth C. Stanton-class transport

Last updated
USS Elizabeth C. Stanton AP-69.jpg
USS Elizabeth C. Stanton, lead ship of the class
Class overview
OperatorsFlag of the United States Navy (official).svg  United States Navy
General characteristics
Type Transport ship
Displacement
  • 7,980 long tons (8,108 t) light
  • 14,909 long tons (15,148 t) full
Length492 ft (150 m)
Beam69 ft 6 in (21.18 m)
Draft24 ft (7.3 m)
PropulsionSteam turbine, single shaft, 8,500 hp (6,338 kW)
Speed18 knots (33 km/h; 21 mph)
Complement396
Armament

The Elizabeth C. Stanton class transport ship was a transport class of the United States Navy that originated just prior to the second World War. The class, which contained only four ships, is named for Elizabeth Cady Stanton. All of the vessels were named for important women in history, including: USS Elizabeth C. Stanton (AP-69); USS Florence Nightingale (AP-70); USS Mary Lyon (AP-71); and USS Anne Arundel (AP-76).

See also

Related Research Articles

USS <i>Lyon</i>

USS Lyon (AP-71) was a type C3 ship of the United States Navy which played an extensive role in naval transportation during World War II. The Lyon was built as Mormactide under a Maritime Commission (MC) contract by the Ingalls Shipbuilding Company of Pascagoula, Mississippi. She was laid down 21 August 1939, and was launched on 12 October 1940; sponsored by Gloria McGehee.

USS Florence Nightingale (AP-70) was a Maritime Commission type C3-M cargo ship built as Mormacsun for Moore-McCormack Lines. Mormacsun operated for Moore-McCormack from May 1941 until December 1941 when she came under the War Shipping Administration (WSA) for the duration of World War II. The ship operated with Moore-McCormack as the WSA agent, playing an important role in early supply of the Southwest Pacific, until transfer to the United States Navy September 1942 and commissioning as Florence Nightingale whereupon she became an Elizabeth C. Stanton-class transport ship. She was named for Florence Nightingale (1820–1910), the nursing pioneer, and is one of the few United States Navy ships named after a woman. The ship was returned to WSA in 1946 and then to Moore-McCormack operating as Mormacsun until sold to operate as Japan Transport and lastly as Texas.

USS <i>Elizabeth C. Stanton</i>

USS Elizabeth C. Stanton (AP-69) was the lead ship of her class of Second World War United States Navy transport ships, named for the suffragist and abolitionist Elizabeth Cady Stanton.

<span class="mw-page-title-main">Troopship</span> Ship used to carry soldiers

A troopship is a ship used to carry soldiers, either in peacetime or wartime. Troopships were often drafted from commercial shipping fleets, and were unable to land troops directly on shore, typically loading and unloading at a seaport or onto smaller vessels, either tenders or barges.

Type C2 ship Ship type

Type C2 ships were designed by the United States Maritime Commission (MARCOM) in 1937–38. They were all-purpose cargo ships with five holds, and U.S. shipyards built 328 of them from 1939 to 1945. Compared to ships built before 1939, the C2s were remarkable for their speed and fuel economy. Their design speed was 15.5 knots (28.7 km/h), but some could make 19 knots (35 km/h) on occasion. The first C2s were 459 feet (140 m) long, 63 feet (19 m) broad, and 40 feet (12 m) deep, with a 25-foot (8 m) draft. Later ships varied somewhat in size. Some, intended for specific trade routes, were built with significant modifications in length and capacity.

<span class="mw-page-title-main">Attack transport</span> United States Navy ship classification

Attack transport is a United States Navy ship classification for a variant of ocean-going troopship adapted to transporting invasion forces ashore. Unlike standard troopships – often drafted from the merchant fleet – that rely on either a quay or tenders, attack transports carry their own fleet of landing craft, such as the landing craft, vehicle, personnel (LCVP) or Higgins boat.

Type C3-class ship Ship type

Type C3-class ships were the third type of cargo ship designed by the United States Maritime Commission (MARCOM) in the late 1930s. As it had done with the Type C1 ships and Type C2 ships, MARCOM circulated preliminary plans for comment. The design presented was not specific to any service or trade route, but was a general purpose ship that could be modified for specific uses. A total of 162 C3 ships were built from 1939 to 1946.

<i>General G. O. Squier</i>-class transport

The General G. O. Squier class of transport ships was built for the U.S. Navy during World War II. The class was based upon the Maritime Commission's Type C4 ship. The class was named for United States Army Major General George Owen Squier.

<i>Frederick Funston</i>-class attack transport

The Frederick Funston-class attack transport was a class of two US Navy attack transports. They saw service in World War II and later in the Korean War.

<i>President Jackson</i>-class attack transport

The President Jackson-class attack transport was a class of seven US Navy attack transport that saw service in World War II.

USS <i>President Monroe</i>

USS President Monroe (AP-104) was a President Jackson-class attack transport. that served with the US Navy during World War II. She was named after Founding Father and the fifth U.S. president, James Monroe.

Type C4-class ship Cargo ships built by the United States Maritime Commission

The Type C4-class ship were the largest cargo ships built by the United States Maritime Commission (MARCOM) during World War II. The design was originally developed for the American-Hawaiian Lines in 1941, but in late 1941 the plans were taken over by the MARCOM.

USS Elizabeth has been the name of more than one United States Navy ship, and may refer to:

The Marine Adder class of transports were Type C4-class ship built for the United States Maritime Commission (MARCOM) during World War II. They were converted after the war for use by the United States Navy (USN) for troop transports. Marine Adder-class ships also served in the Korean War.