F.R.A.S. (weapon)

Last updated
A Churchill Crocodile tank firing FRAS Churchill Crocodile tank.jpg
A Churchill Crocodile tank firing FRAS

Fuel Research Aluminium Stearate (FRAS), is mixture of chemical substances, used as an incendiary agent by the United Kingdom during the Second World War.

Contents

It is hygroscopic fuel developed by the Fuel Research Station of the Department of Scientific and Industrial Research. [1] It is a generally inferior compound to the napalm thickener, exhibiting high thermal and aquatic instability, [2] not reproducible in quantities specified by US CWS and does not form permanent gels. [3]

In the conflict in Europe, it was the fuel of the M1A1 flamethrower. [4] [ page needed ] Delivered ready to use. [5] It was used as fuel for individual flamethrowers, for the Churchill Crocodile flamethrower tank (standard fuel), and was studied as a precursor in the 5B incendiary paste used in the flame-fougasse.

It was adopted by the Canadian Army in 1942 and by the British War Office 1943. The Australian army leaned towards the adoption of the FRAS, however, due to the instability of the FRAS in the tropical climate, it was discarded. [6]

History

After the start of the Second World War, concerned with the development, research and technical mastery of incendiary mixtures, the Mixture Committee was formed in the second half of the year 1940 by the Director of Fuel Research, Dr. Frank Sturdy Sinnatt. [lower-alpha 1] The development of material, such as a substitute for rubber, was started in January 1942, in several works, by several members of the committee. [7]

A narrow rod of FRAS from a portable flamethrower Flamethrowers in Action, August 1944 TR2318.jpg
A narrow rod of FRAS from a portable flamethrower

In early investigative work, the standard component was rubber, being the constituent in several incendiary mixtures. Its anomalous viscosity being essential for flamethrower fuel. The use of this component deteriorated with the Japanese take over of Malaysia in February 1942. [8]

The initial results of the development of the thickened fuel turned out to be unsatisfactory but an additive remedied the deficiencies of the gel. [7] After this resolution, a special investigation into the manufacture of soaps was carried out, solving the problems of the thickener. [8]

Work with FRAS gels was then carried out at the Fuel Research Station until fuel production was taken over by the Ministry of Supply. The Fuel Research Station continued to serve as an advisor on the industrial scale production and improvement of FRAS and its precursors, of which around 41 million litres were manufactured and used in the European theatre. [8]

The use of aluminum stearate as a flame fuel thickener, as well as the general technique of manufacturing FRAS, was already used by the Soviets earlier. [9]

Military use

The service fuel has undergone various degrees of requirements, both due to the seasons and the war zone. In general, production plants prepared two types of fuel for flamethrowers. [8]

FRAS was mainly used in Europe The British fuel was widely used by American forces as fuel for the M1A1 flamethrower. [2] Some units used it in preference to napalm. [2] The napalm gel had a tendency to channel in fuel tanks, resulting in incomplete exhaustion of the fuel. [4] Due to Britain's economic condition, "K" fuel was in short supply, particularly when the US Third Army landed on the continent. [4]

Transport and handling

The batches of fuel were conditioned in drums, then stored in open spaces and in a stacked manner. The transfer process, to flamethrowers or other devices, were problematic, particularly for mechanized flamethrower fuel. [8]

The process of working with the drum for Crocodile proved to be especially laborious, requiring the construction of a high structure and a side opening in the drum to facilitate its handling. [10] US Army flamethrower users were given a 5 US gallon "Jerrycan". [4]

See also

Notes

  1. replaced after his death in 1943 by Alfred Egerton

Related Research Articles

<span class="mw-page-title-main">Napalm</span> Gelled incendiary mixture

Napalm is an incendiary mixture of a gelling agent and a volatile petrochemical. The name is a portmanteau of two of the constituents of the original thickening and gelling agents: coprecipitated aluminium salts of naphthenic acid and palmitic acid. Napalm B is the more modern version of napalm and, although distinctly different in its chemical composition, is often referred to simply as "napalm". A team led by chemist Louis Fieser originally developed napalm for the US Chemical Warfare Service in 1942 in a secret laboratory at Harvard University. Of immediate first interest was its viability as an incendiary device to be used in fire bombing campaigns during World War II; its potential to be coherently projected into a solid stream that would carry for distance resulted in widespread adoption in infantry flamethrowers as well.

<span class="mw-page-title-main">Flamethrower</span> Ranged incendiary device designed to project a controllable stream of fire

A flamethrower is a ranged incendiary device designed to project a controllable jet of fire. First deployed by the Byzantine Empire in the 7th century AD, flamethrowers saw use in modern times during World War I, and more widely in World War II as a tactical weapon against fortifications.

<span class="mw-page-title-main">Incendiary device</span> Weapons intended to start fires

Incendiary weapons, incendiary devices, incendiary munitions, or incendiary bombs are weapons designed to start fires or destroy sensitive equipment using fire, using materials such as napalm, thermite, magnesium powder, chlorine trifluoride, or white phosphorus. Though colloquially often known as bombs, they are not explosives but in fact are designed to slow the process of chemical reactions and use ignition rather than detonation to start or maintain the reaction. Napalm, for example, is petroleum especially thickened with certain chemicals into a 'gel' to slow, but not stop, combustion, releasing energy over a longer time than an explosive device. In the case of napalm, the gel adheres to surfaces and resists suppression.

<span class="mw-page-title-main">Flame tank</span> Armored vehicle equipped with a flamethrower

A flame tank is a type of tank equipped with a flamethrower, most commonly used to supplement combined arms attacks against fortifications, confined spaces, or other obstacles. The type only reached significant use in the Second World War, during which the United States, Soviet Union, Germany, Italy, Japan, and the United Kingdom all produced flamethrower-equipped tanks.

<span class="mw-page-title-main">Mark 77 bomb</span> American air-dropped incendiary bomb

The Mark 77 bomb (MK-77) is a United States 750-pound (340 kg) air-dropped incendiary bomb carrying 110 U.S. gallons of a fuel gel mix which is the direct successor to napalm.

<span class="mw-page-title-main">Hobart's Funnies</span> Modified tanks first used in the Normandy Landings

Hobart's Funnies is the nickname given to a number of specialist armoured fighting vehicles derived from tanks operated during the Second World War by units of the 79th Armoured Division of the British Army or by specialists from the Royal Engineers.

<span class="mw-page-title-main">Type 93/Type 100 flamethrower</span> Flamethrower

The Type 93 and Type 100 flamethrowers were flamethrowers used by the Imperial Japanese Army and Imperial Japanese Navy's SNLF during the Second Sino-Japanese War and World War II.

<span class="mw-page-title-main">Flamethrower, Portable, No 2</span> Flamethrower

The Flamethrower, Portable, No 2, also known as the Ack Pack, was a British design of flamethrower for infantry use in the Second World War.

<span class="mw-page-title-main">Thickening agent</span> Increases the viscosity of a liquid without altering its other properties

A thickening agent or thickener is a substance which can increase the viscosity of a liquid without substantially changing its other properties. Edible thickeners are commonly used to thicken sauces, soups, and puddings without altering their taste; thickeners are also used in paints, inks, explosives, and cosmetics.

<span class="mw-page-title-main">Lagonda flamethrower</span> Incendiary weapon produced during World War II

The Lagonda company produced a number of flamethrowers during the Second World War.

<span class="mw-page-title-main">Churchill Crocodile</span> Infantry tank/Flame tank

The Churchill Crocodile was a British flame-throwing tank of late Second World War. It was a variant of the Tank, Infantry, Mk IV (A22) Churchill Mark VII, although the Churchill Mark IV was initially chosen to be the base vehicle.

<span class="mw-page-title-main">Triethylaluminium</span> Chemical compound

Triethylaluminium is one of the simplest examples of an organoaluminium compound. Despite its name the compound has the formula Al2(C2H5)6 (abbreviated as Al2Et6 or TEA). This colorless liquid is pyrophoric. It is an industrially important compound, closely related to trimethylaluminium.

<span class="mw-page-title-main">M1 flamethrower</span> Flamethrower

The M1 and M1A1 were portable flamethrowers developed by the United States during World War II. The M1 weighed 72 lb, had a range of 15 meters, and had a fuel tank capacity of five gallons. The improved M1A1 weighed less, at 65 lb, had a much longer range of 45 meters, had the same fuel tank capacity, and fired thickened fuel (napalm).

<span class="mw-page-title-main">Flame fougasse</span> Anti-personnel and anti-tank mine

A flame fougasse is a type of mine or improvised explosive device which uses an explosive charge to project burning liquid onto a target. The flame fougasse was developed by the Petroleum Warfare Department in Britain as an anti-tank weapon during the invasion crisis of 1940. During that period, about 50,000 flame fougasse barrels were deployed in some 7,000 batteries, mostly in southern England and a little later at 2,000 sites in Scotland. Although never used in combat in Britain, the design saw action later in Greece.

The Petroleum Warfare Department (PWD) was a government department established in Britain in 1940 in response to the invasion crisis during World War II, when Germany apparently would invade the country. The department was initially tasked with developing the uses of petroleum as a weapon of war, and it oversaw the introduction of a wide range of flame warfare weapons. Later in the war, the department was instrumental in the creation of the Fog Investigation and Dispersal Operation that cleared runways of fog allowing the landing of aircraft returning from bombing raids over Germany in poor visibility, and Operation Pluto, which installed prefabricated fuel pipelines between England and France soon after the Allied invasion of Normandy in June 1944.

<span class="mw-page-title-main">United States Naval Construction Battalion flame thrower tanks</span>

During WWII United States Naval Construction Battalions ("Seabees") modified/created all of the main armament flame throwing tanks that were used in the Pacific War: by USMC in the Battle of Saipan, Battle of Tinian, Battle of Iwo Jima, and by the U.S. Army in the Battle of Okinawa.

<span class="mw-page-title-main">Chemical Warfare Service: Flame Tank Group Seabees</span>

When WWII broke the United States had no mechanized flamethrowing capability. It is believed that an officer in the 754th U.S. Army tank battalion came up with the idea of mounting a flame thrower on a M3 Light tank on the island of New Caledonia. The Army used the idea on New Georgia and the Marines during the Battle of Bougainville. After which further development passed to the U.S. Army. Chemical Warfare Service at Schofield Barracks, Territory of Hawaii. There the Army reached out to the United States Naval Construction Force for assistance. The Seabees accepted the offer and converted or modified nearly 400 tanks for the Army. Those weapons set the standard for the U.S. through the Korean War. It was not until 1955 that a superior flame throwing tank replaced the Shermans the Seabees created.

OP-2 (ОП-2), or Ionov's salt, indicated on the package as Н. А., is a chemical substance used as a thickener. The main component of OP-2 gel is gasoline. On the cardboard or cardboard packaging of the OP-2, the inscription "H.A." refers to its unit component, aluminum naphthenate. Due to the same orders as the initials of its name, OP-2 was, for a long time, interpreted as being the opalm, a "hybrid" swiss thickener.

<span class="mw-page-title-main">Geletrol</span>

Geletrol is the trade name for a form of aluminium oleate, a chemical substance of chemical formula (C18H33O2)2AlOH and empirical formula (C18H33O2)1,7Al(OH)1,3. It is an amorphous solid derived from aluminum hydroxide and oleic acid, non-uniformly composed.

References

  1. Clark, R. War Winners - Part 4: Preparing For Invasion. p 3
  2. 1 2 3 McKinney 1949. Quoting Training Memo #10, HQ ETO, USA, 5 Apr 1944
  3. UIAOPDCIM. REVIEW ON MATERIALS. NAPALM THICKENER. 20.
  4. 1 2 3 4 McKinney 1949.
  5. Fletcher 2007, p. 21.
  6. Larson, C.A. Report #: 73. A Survey of Army Research and Development 1939-45. 14 Feb 1955.
  7. 1 2 Cawley et al. 1947a.
  8. 1 2 3 4 5 Cawley et al. 1947b.
  9. V. I. Losev. Gazavaya Promyshlennost, Vol 4, No 12, 1959. pp 17-24
  10. Fletcher 2007, p. 23.

Works cited