Funmate

Last updated

Funmate (also called Funmate International) was a toy company based in Japan. It was probably best known for its plastic promotional model cars made in the 1970s and 1980s. Sizes varied, but they were about 1:40 scale (four to five inches in length). The company also made a variety of other plastic toys. Later toys were made in Hong Kong.

Contents

Promotional offerings

Probably Funmate's most well-known offering was a series of Ford vehicles sealed in plastic to the sides of Procter & Gamble detergent packages for 1971 and 1972. [1] They were marketed as "Go Cars" and had a spring-loaded handle with a three-inch-long narrow metal rod that slipped into a hole in the back of the car. When not in use, the handle could be placed in another hole to the back right of the bumper. The handle was usually molded in the same color as the car. The car shot across the floor when a small black lever was depressed. Some of the later cars were made with a launching "pad" mechanism that the car rested on top of, probably because kids could get jabbed in the eye if the original rod wasn't held firmly. It could spring backwards as the original label on the bottom of the car warned.

These cars were produced in about 1:40 scale (5 inches long) and included Ford Torinos (in 1971 and 1972 body styles), a Ford Mustang Mach 1, a Maverick, a Thunderbird, a Mercury Cougar, and a Mercury Montego. They were molded in polystyrene plastic and came in light lime green, orange, yellow, beige, white and a dark maroon red. They appeared almost to be smaller versions of American promotional models, though the orange and maroon colors of plastic were not so opaque in appearance like in traditional 1:25 scale promotional models. Curiously, no dark greens or blues were offered. The cars had very accurate proportions and fair detail. Chassis were molded in a silver gray as were wheels. Tires were a hard black plastic. Because of the launching mechanism there were no interiors.

In Japan, these were sometimes packaged in non-promotional form as "OK Star" in a two tier carton that portrayed a driver with racing helmet on. These opened for display with Japanese script printed on the box. The packaging also had illustrations displaying how to use the launchers (71-73 Mustang).

A few General Motors cars in this same style were also offered. One was a 1973 Oldsmobile Omega two-door (the same general style as the Chevrolet Nova). The car came in red molded plastic with the typical Funmate gray base.

Other toys

Funmate also offered other sizes of cars and other vehicles, almost always in plastic. Some were more sporty or collectible while others were commercial trucks and other vehicles. One example was a replica of a 1972 Lotus Formula One car. This car was also very similar to one made by a company named Jimson Toys. Many, but not all, of these cars had some kind of spring launch platform or "key" handle. A similar model looked a bit more like an Indy car, and also a series of closed vehicles that were called "Grand Prix Racers" were made and advertised as good for "140 mph scale speed".

Friction Volkswagen Beetles and Porsches and different kinds of trucks also appeared in about the same sizes. Some of the truck offerings, among them a cement mixer, a tow truck, a log hauling truck, a forklift and a dump truck. These were about the same length as the cars discussed above.

In the early 1980s, the company made a series of "puffy stickers" of NHL players, such as Wayne Gretzky, which could be peeled from a backing and stuck on other surfaces. Also an Apollo space command set of the moon voyage ships was offered. Toy pistols and rifles (some with scopes) were also produced. More recently, Funmate has focused on toys for young children and infants such as rattles, mobiles, dolls, and musical toys.

Related Research Articles

Model car

A model car, or toy car, is a miniature representation of an automobile. Other miniature motor vehicles, such as trucks, buses, or even ATVs, etc. are often included in this general category. Because many miniature vehicles were originally aimed at children as playthings, there is no precise difference between a model car and a toy car, yet the word 'model' implies either assembly required or the accurate rendering of an actual vehicle at smaller scale. The kit building hobby became popular through the 1950s, while the collecting of miniatures by adults started to pick up momentum around 1970. Precision-detailed miniatures made specifically for adults are a significant part of the market since the mid-1980s.

Louis Marx and Company American Toy Company

Louis Marx and Company was an American toy manufacturer in business from 1919 to 1980. Its products were often imprinted with the slogan, "One of the many Marx toys, have you all of them?"

Die-cast toy Type of toy

A die-cast toy is a toy or a collectible model produced by using the die casting method of putting molten lead, zinc alloy or plastic in a mold to produce a particular shape. Such toys are made of metal, with plastic, rubber, glass, or other machined metal parts. Wholly plastic toys are made by a similar process of injection moulding, but the two methods are distinct because of the properties of the materials.

Siku Toys

SIKU is the range of toy vehicles and related products produced by the German company Sieper Lüdenscheid GmbH & Co. KG in Lüdenscheid, Germany. The company manufactures many vehicles, but the Super Series 1:55 scale die-cast line is the core product, thus Siku historically could be seen as the "German Matchbox". The company also owns the well known HO scale producer Wiking-Modellbau.

Majorette (toy manufacturer)

Majorette is a French toy manufacturer which mostly produces small die-cast cars and other construction and military vehicles, particularly in 1:64 scale. This is a normal 2.5–3 in (64–76 mm) size, thus Majorette has sometimes been called the Matchbox Toys of France. Traditionally, production was centered in the urban area of Lyon, but models are now made in Thailand.

Playart

Playart was a toy company owned by Hong Kong industrialist Duncan Tong (唐鼎康) that specialized in die-cast cars, similar in size and style to Hot Wheels, Matchbox or Tomica. Cars were well done, but were often diecast seconds from other companies like Yatming or Tomica. Cars were made from 1965 to 1983 at the factory in San Po Kong, Kowloon, Hong Kong. Plastic cars and trucks of 1:43, and 1:24 scale were also made, while trains and other theme toys also appeared.

AUTOart is a Hong Kong-based diecast model car line sold by AA Collection Ltd. The company was formerly owned by Gateway Global Ltd., which was based in Costa Mesa, California.

Aluminum Model Toys

Aluminum Model Toys, commonly abbreviated as AMT, was a Troy, Michigan-based company that manufactured various pre-assembled plastic promotional models starting in 1948, when attorney West Gallogly, Sr. started it as a side business. Later, a variety of kits became very popular. Most of the company's vehicle products were American cars and trucks in 1:25 scale. In the 1970s, hot rods, customs, trucks and movie and TV vehicles were also produced, with their association with Star Trek a particular stand out.

The Auburn Rubber Company was a rubber products manufacturer best known for its line of children's toys. It was probably the largest producer of rubber and vinyl toys in the world, though Norway's Tomte Laerdal, Finland's Plasto, and Sweden's Galanite were major European producers.

The Hubley Manufacturing Company was an American producer of a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles and cap guns, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed scale metal kits of Classic cars in about 1:20 scale. Starting in 1960, Hubley participated for a couple of years with Detroit automakers as a plastic promotional model maker. Many Hubley toys are now sought-after collectibles.

Stahlberg Models

Stahlberg was a Finnish company producing promotional plastic model cars mainly of Swedish Saab and Volvo automobiles usually in scales between 1:18 and 1:25. Stahlberg mainly molded cars from the 1960s to about 1992, though its modern counterpart, Emek continues to make truck models.

Norev

Norev is a French manufacturer of diecast metal model cars. traditionally based in Villeurbanne, a suburb of Lyon. It has normally produced modern and vintage European vehicles, especially those of French origin – though Italian, German, British, and American vehicles were also produced. Norev's closest competition was Solido, but that company had more pan-European influence, while Norev was more national in orientation.

Gama Toys

Gama is a German maker of toys, usually cars and trucks, dating from before World War I. The company is headquartered in Fürth, Bavaria, near Nürnberg, a traditional German toymaking center. Other German companies that competed with Gama Toys were Schuco Modell and Conrad Models.

Cursor Models

Cursor Modell was a German company making models of antique and modern German vehicles. It is best known for its plastic replicas of vehicles mainly of the era 1880 to about 1920, produced for, and sold in, the Daimler-Benz museum in Stuttgart.

Product Miniature Company, or known by the acronym PMC, was a company that manufactured pre-assembled plastic promotional models cars, banks and toys in Milwaukee, Wisconsin. It was started by brothers William Edward "Ed" and Paul Ford in 1946. Car model production, the company mainstay, ended about 1965. In 1958 or 1959 the company moved to Pewaukee, west of Milwaukee, and remains there to this day, now producing other plastic promotional products, but not vehicles.

Kaden models

Kaden Nachod is the somewhat anglicized name for the Kovodružstvo Náchod toy factory in the town of Nový Hrádek in the Czech Republic. The factory, however, started making toys about 1950 when the country was still communist united Czechoslovakia.

The Pyro Plastics Corporation of Union, New Jersey was a manufacturer of plastic toys and model kits popular during the 1950s and 1960s.

Safir (models)

Safir, sometimes called Safir Champion was a French company making diecast metal classic veteran and contemporary plastic race cars and other vehicles in the 1960s through the 1970s. It arose out of the previous French toymaker, Jadali.

Gamda Koor, also known as Sabra was an Israeli diecast toy company that specialized in 1:43 scale cars. Most of these seem to have been original offerings, not seen elsewhere and not secondary tooling. The toy company Cragstan marketed Gamda Sabras as "Detroit Sr." for the American Market.

References

  1. "The Accelerator" (PDF). 2008. [From the Pony Toy Box. On-line Mustang enthusiast newsletter.]