Gamda Koor, also known as Sabra was an Israeli diecast toy company that specialized in 1:43 scale cars. Most of these seem to have been original offerings, not seen elsewhere and not secondary tooling. The toy company Cragstan marketed Gamda Sabras as "Detroit Sr." for the American Market.
Gamda was a toy brand name of the parent firm Habonim in Kibbutz Kfar HaNassi (Village of the President) located in Northern Israel, north of the Sea of Galilee and just adjacent to the border to the Golan Heights.[1] The name 'Gamda' means 'midget' or 'dwarf' in Hebrew (thus 'Midget' toys).[2] In the 1967 Six Day War with Syria the factory was damaged and repairs were needed – production soon resumed.[3] Koor was a company name added later (see next section). The latter name 'Sabra' was applied to the mid-1960s diecast line of mostly American cars and was a uniquely nationalistic Israeli concept. This word for cactus signifies an Israeli Jew born anywhere in the historical land of Palestine. It is interesting that the name Sabra was also given to the Israeli real car brand from the mid-1960s. Thus the toy brand Gamda Sabra could be translated as "Israeli-born midget toys".
History
In 1962, the company started recasting old British D.C.M.T. (Lone Star Toys) dies of tractors, trucks and military vehicles.[1][4][5] Gamda vehicles were produced in two series – transport (Jeepsters, Daimler, an American Buick, Ford Prefect, a Standard Vanguard delivery truck, buses, milk trucks, petrol tankers, etc.) or military (Jeeps, tanks, trucks, and trailers, etc.). One of the more popularly seen was a wheeled tank / armored car. One early Gamda offering that has become in demand is a bus in the livery of the Egged Ta'avura Cooperative, which was the main transportation agency in Israel. The bus has been known to sell for more than $1,000.[2]
In about 1966, Gamda partnered with another firm, Koor, which was owned by the Histradrut, the Israeli trade union.[6] This formed a company called Gamda Koor Export.[1] The new company mainly existed to introduce a new line of mainly American automobiles aimed at foreign markets. At the time, export taxes had been lowered, helping Israeli businesses to break into international markets.[3] These were called Sabra Super Cars and were mainly unique tooling of vehicles not made by other European model makers. Most Sabras were manufactured between 1969 and 1972, but some perhaps a tad earlier.[7] There were 24 models in the series and they were numbered from 8100 to 8123.[6] Models included a 1965 Plymouth Barracuda, a 1966 Charger, a 1965 Chrysler Imperial convertible (Corgi Toys also offered a convertible Imperial, see comparison below), a 1966 Buick Riviera, a 1965 Corvette Coupe (not split window, but the convertible hardtop), a 1965 Chevrolet Chevelle station wagon, a 1966 Olds Toronado, a 1967 Cadillac Eldorado, a 1967 Cadillac Coupe deVille, a 1967 Pontiac GTO, a 1968 Pontiac Firebird, a 1967 Chevy pickup and tow truck, a 1965 Ford Mustang, a Ford GT, a 1967 Ford Torino, a 1966 Chevrolet Impala coupe, a 1967 Camaro, a 1967 Ford Thunderbird, a Volkswagen Beetle and a Jeep Willys. Models were often available in a stock, police, or taxi livery. Some of these, like the Barracuda, Charger, Torino and GTO are more rare and sought after.
Israel
Unique to an Israeli product, models were often seen with United Nations markings, Israeli Army and Israeli Defense Force markings, the Star of David and Hebrew lettering.[8] Marketing emphasized Israeli desires to be accepted as a mainstream toy producer (if not a world class country) in the international market.[2] Markings on the cars were commonly transfer decals and not stickers. The Chevelle wagon was offered in UN (United Nations), IDF (Israel Defense Force), Israeli Army, Hadassah Medical ambulance, postal, Red Cross ambulance and fire chief liveries while the Impala was seen in several police guises and a couple of different taxi (monit) versions.[3][8] The Jeep appeared with UN lettering.
Gamda Sabra 1965 Plymouth Barracuda from the rear. Note that the bumper and body do not make a precise union.
The Charger could be had with the United Nations globe and wreath seal on the doors, while the Eldorado and Riviera were available as Israeli Ministerial cars with doors displaying the shield with the menorah. Some of the cars like the Corvair, Camaro and Riviera were even described on packaging as a "tourist bureau car" or "Israeli President Car". Some cars, especially the Beetle, came with 1970s style 'hippie' flower decals, but the Bug also came in a German (surprisingly, not Israeli!) police version.
Packaging and marketing
Early Gamda Koor Sabra cars were marketed in a clear plastic box with a red 'garage door' to one end. The model in the box was secured on a yellow plastic base that incorporated a petrol pump at one end and a flap to hold the garage door closed. Clear boxes of the editions for the international market were backed with a white, red, and yellow card that said "Sabra Super Car" and included a collector coin and detail slip translated into twelve languages.[8] Later cars had a darker blue card, and came with a cut-out puzzle for added play value.
Later, toy maker Cragstan wanted a piece of the diecast market that Corgi and Dinky had captured and enlisted Gamda Koor models for its international (and specifically American) sales. These models also used the garage door box, but often with a patriotic red, white and blue color scheme on the backing card and down the side of the box. Cragstan called its Sabra Super Cars, "Detroit Seniors". The Cragstan and Detroit Senior names were also molded into the plastic chrome bases of these cars. There were few differences between Sabra and Cragstan castings. One could be seen on the Chevelle wagon. The Chevrolet bow tie was shown on the sides behind the front wheel well, but on the Cragstan version it is missing. The Cragstan cars went for $1.49 in the US market, but did not bear the standard Israeli police, army and post symbols.[1]
Not seen elsewhere
The Sabra line-up was unique in that many cars done by Gamda Koor in 1:43 scale were not attempted by manufacturers anywhere else.[9] The Charger, Barracuda, Corvair, Impala, Cadillac and Riviera do not seem to be second-hand tooling from any other European manufacturer. Considering the uniqueness of the tooling and the Israeli presentation, the Sabra line comes off as fascinating and distinct in the world of miniature diecasts. Though the execution of the cars could have been better, the overall character and raison d'etre of these cars was lost on a famed Christie's auction house book whose authors simply called the Sabra cars "...on the whole, not good" with no other contextual comments.[7]
The Chrysler Imperial convertible, at first glance, appears to be a casting from Corgi Toys (no. 246), but even cursory inspection shows they are quite distinct. The Corgi is smaller and a more customary 1:43 scale while the Gamda is larger, probably about 1:40. Lines and trim are distinct – the Corgi has a crease line on hood and 'boot' missing from the Gamda, but the side profile of the Gamda appears more accurate. The metal of the Gamda body completely surrounds the windshield, while the Corgi is all plastic. Instead of having all features open, as the Corgi does, only the trunk opens on the Gamda, which was strange, but common on Sabra cars.
The Olds Toronado may be similar to the Tekno version, but considering the above, is probably not Tekno tooling. The Charger, Impala, Thunderbird and the Imperial are similar in that all have only trunks that open. The Barracuda, Riviera, Toronado, Corvair, Corvette, and Mustang all have opening doors. The Impala was, intriguingly, made in a two-door and a four-door version – the four-door appeared to just have an additional pillar added with four doors 'etched' (making the fit rather tight) in the metal.
The fidelity of the shapes to the real cars was good, but not excellent. Perhaps the Riviera's and Barracuda's proportions are the best, while the Charger looks a bit stretched. The roof of the Corvette is a bit squarish and the opening doors on the Corvair look rather roundish compared to body panels they are supposed to match. Body lines are not smooth, with sometimes gravelly and uneven edges. Many of these cars have front and rear bumpers that are part of diecast plastic bases. Being such, many times the bumpers do not match up well with the diecast metal bodies, leaving gaps, as with the Barracuda shown above.[9] Wheels were simple and unadorned indented silver metal discs with protruding axle ends. Some later cars had plastic five-spoke 'star' chrome wheels.
Related Research Articles
A model car, or toy car, is a miniature representation of an automobile. Other miniature motor vehicles, such as trucks, buses, or even ATVs, etc. are often included in this general category. Because many miniature vehicles were originally aimed at children as playthings, there is no precise difference between a model car and a toy car, yet the word 'model' implies either assembly required or the accurate rendering of an actual vehicle at smaller scale. The kit building hobby became popular through the 1950s, while the collecting of miniatures by adults started to gain momentum around 1970. Precision-detailed miniatures made specifically for adults are a significant part of the market since the mid-1980s.
Personal luxury car is a North American car classification describing somewhat sporty, sophisticated mass-market coupés that emphasized comfort over performance. The North American manufacturers most often combined engineering, design, and marketing to develop upscale, distinctive "platform sharing" models that became highly profitable.
Dinky Toys was the brand name for a range of die-cast zamak zinc alloy scale model vehicles, traffic lights, and road signs produced by British toy company Meccano Ltd. They were made in England from 1934 to 1979, at a factory in Binns Road in Liverpool.
Corgi Toys (trademark) is the brand name of a range of die-cast toy vehicles created by Mettoy and currently owned by Hornby, after it acquired the Corgi Classics Limited Company in 2008.
Sieper Lüdenscheid GmbH & Co. KG, mostly known by its trade name Siku, is a German manufacturer of scale models headquartered in Lüdenscheid. Some of the products sold by Siku are model cars, figurines, model aircraft, model commercial vehicles, and model agricultural machinery. Traditionally, production was centered in Lüdenscheid, but diecast models are now made in China, the Philippines, Taiwan and Vietnam.
Lone Star Products Ltd. was the brand name used by the British company Die Cast Machine Tools Ltd (DCMT) for its toy products. DCMT was based in Welham Green, Hertfordshire, north of London.
Spot-On models was a brand name for a line of diecast toy cars made by Tri-ang from 1959 through about 1967. They were manufactured in 1:42 scale in Belfast, Northern Ireland, of the United Kingdom. Competition for Spot-On in the British Isles were Corgi Toys and Dinky Toys. The line was particularly British and rarely produced marques from other countries.
Husky was a brand name for a line of business die-cast toy scale model vehicles manufactured by defunct company Mettoy Playcraft Ltd. of Swansea, Wales, which also made the larger Corgi Toys. Husky Models was re-branded "Corgi Junior" in 1970, and a further range called "Corgi Rockets" was developed to race on track sets.
Playart was a toy company owned by Hong Kong industrialist Duncan Tong (唐鼎康) that specialized in die-cas toy cars, similar in size and style to Hot Wheels, Matchbox or Tomica. Cars were well done, but were often diecast seconds from other companies like Yatming or Tomica. Cars were made from 1965 to 1983 at the factory in San Po Kong, Kowloon, Hong Kong. Plastic cars and trucks of 1:43, and 1:24 scale were also made, while trains and other theme toys also appeared.
Tekno is a Danish manufacturing company of scale model trucks and other vehicles, currently headquartered in De Lier, Netherlands. Originally established and based in Copenhagen, Tekno began manufacturing construction toys in 1928 and model vehicles immediately after World War II, selling 1 million a year during its peak.
Schabak is a die-cast toy producer based in Nuremberg, Germany. The company is well known for its line of German cars and commercial airline models. The company's on and off relation with German Schuco Modell is particularly notable.
Aluminum Model Toys (AMT) is an American brand of scale model vehicles. The former manufacturing company was founded in Troy, Michigan, in 1948 by West Gallogly Sr. AMT became known for producing 1:25 scale plastic automobile dealer promotional model cars and friction motor models, and pioneered the annual 3-in-1 model kit buildable in stock, custom, or hot-rod versions. The company made a two-way deal in 1966 with Desilu Productions to produce a line of Star Trek models and to produce a 3/4 scale exterior and interior filming set of the Galileo shuttlecraft. It was also known for producing model trucks and movie and TV vehicles.
The Hubley Manufacturing Company was an American producer of a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles and cap guns, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed scale metal kits of Classic cars in about 1:20 scale. Starting in 1960, Hubley participated for a couple of years with Detroit automakers as a plastic promotional model maker. Many Hubley toys are now sought-after collectibles.
Polistil S.p.A. is an Italian toy brand and former manufacturing company headquartered in Milan, with production center in Chiari, near Brescia. Polistil specialized in die-cast and plastic scale model vehicles of all sizes.
Gama is a German maker of toys, usually cars and trucks, dating from before World War I. The company is headquartered in Fürth, Bavaria, near Nürnberg, a traditional German toymaking center. Other German companies that competed with Gama Toys were Schuco Modell and Conrad Models.
Pilen S.A. was a Spanish manufacturing company headquartered in Ibi, Alicante, which produced die-cast scale model cars from the 1970s through the mid-1990s mostly in 1:43 scale. A majority of the castings were inherited from French Dinky.
Holand Oto is a Dutch manufacturing company based in Weert that produces diecast scale model cars and trucks. The company was established in 1959 in Heerlen as "Bestbox", then changing its name to "Efsi" in early 1970s.
Sablon was a Belgian company near Brussels that made diecast zamac toy cars in the late 1960s and early 1970s. Models were mostly in 1:43 scale and were similar in concept to Dinky Toys or Solido.
Morris & Stone, Ltd., which later changed its name to the more well-known Budgie Toys, was a British die-cast toy distributor turned manufacturer, based in London. The company first specialised in horse-drawn carriages and coaches. It later made a wide variety of miniature cars and trucks.
1 2 Richardson, Mike; Richardson, Sue (1999). Christie's Presents: Wheels, The Magical World of Automotive Toys. San Francisco: Chronicle Books. p.161. ISBN0-8118-2320-2.
1 2 Goranson, Harvey. 2008. Forum 43. The Diecast Zone Model Car Club.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
