GeoMod

Last updated

GeoMod is a raster-based land change modeling tool in the GIS software TerrSet that simulates the gain or the loss of a land category over a specified time interval. [1] The model only simulates the spatial allocation of change between two land categories either forwards or backwards in time. [1] [2]

Contents

Simulation inputs

GeoMod simulates land change based on a combination of several input requirements. First, users must specify the beginning (time 1) and end time (time 2) for the temporal extent of the simulation and must identify a time step for the simulation. [2] The model also needs the image that depicts the two land categories (e.g. category 1= undeveloped and category 2=developed) at time and a projected quantity of the two categories at time 2. [1] GeoMod also needs a suitability map, which shows the transition suitability of each pixel. The higher values in the suitability map, the more suitable the pixel is for transition the gain of category 2. If the user does not have a suitability map, GeoMod can create one using one or more driver images. A driver image is a categorical image that indicates the distribution of a variable that is believed to influence the change of the land-cover categories. [3]

GeoMod can separate the analysis into strata, such as political units, and then simulate change independently within each stratum. [1] If the quantity of change from time 1 to time 2 indicates a net gain of category 2 in a particular stratum, then GeoMod assumes zero gross loss of category 2 during the simulation, meaning GeoMod does not simulate simultaneous gain and loss of an individual category within an individual stratum. GeoMod allocates change based on several user-defined decision rules, which are discussed in section 3.

Optional inputs

In addition to the mandatory simulation inputs listed above, there are several additional optional data inputs. [2]

  1. A mask can differentiate between the background and the spatial extent of the study area.
  2. Driver image(s) can be used to create the suitability map.
  3. A land category map at time 2 (end time) can be used to automatically set the time 2 pixel counts for both category 1 and category 2.
  4. A stratification image can stratify the simulation by stratum. Strata are regions of analysis, e.g. countries, states, counties. GeoMod can simulate land change in some strata from category 1 to category 2, and in other strata from category 2 to category 1. If a stratification image is used, the user must specify the quantity of pixels for the two categories at time 2 for each individual stratum.

Environmental impact analysis

GeoMod can also analyze the environmental impact on the pixels that undergo change within a specified time interval. This optional feature requires an image showing the environmental resource of interest, an image showing the ratio of the potential impact to the environmental resource of interest, and an image showing the ratio of simulated impact to potential impact. [2] If the latter two images are not available, a fixed ratio for the entire study area may be used.

GeoMod decision rule for allocating change

Decision rule 1

Decision rule 1 is mandatory and assumes a one-way change either forward or backwards in time within each stratum. The model determines which category experiences a net increase and then simulates gross gain in that category and zero gross loss of that category. [1] [2]

Decision rule 2

Decision rule 2 is optional and it concerns regional stratification. Rule 2 can allow for change from category 1 to category 2 in some strata and from category 2 to category 1 in other strata. When using regional stratification, the user has to specify the quantity for each category at time 2 in each stratum.

Decision rule 3

Decision rule 3 is also optional and it focuses on the neighborhood constraint. GeoMod can geographically limit the simulated change to pixels that are on the edge between category 1 and category 2. [4] The model can thus apply a user-defined minimum search width to constrain where simulated change occurs.

Decision rule 4

Decision rule 4 is also optional and concerns a suitability map. When simulating the transition from category 1 to category 2, GeoMod simulates change from the category 1 pixels that have the largest suitability values. [1]

Validation

Pattern validation shows how the simulated change compares to reference change, for cases where a reference map is available for validation. A visual approach makes use of the CROSSTAB module in TerrsSet by comparing three maps simultaneously: Reference time 1, Reference time 2, and Simulated time 2. [2] Additionally, the Total Operating Characteristic (TOC) curve may be used to compare the suitability map to a map of reference change. Terrset has a module called ROC, which can assist in the selection thresholds for the TOC. [5]

Deforestation

Geomod can be used to model land change in forest cover to assess the potential for future REDD+ projects. [6] [7] Modeling deforestation requires assessing appropriate calibration intervals, usually two thirds of a dataset that extrapolate out to future scenarios and have been validated using the final third of the dataset. The amount of change can be specified within the module and the allocation of change is determined by suitability driver maps. These maps are created based on user-selected datasets, such as distance to roads.

Exploratory Usage of Geomod

While typically used to simulate land change, Geomod can also be used to produce suitability maps for invasive species distribution. This subject is further discussed in a video on Finding Geographic Gradients with GEOMOD.

Related Research Articles

Geographic information system System to capture, manage and present geographic data

A geographic information system (GIS) is a type of database containing geographic data, combined with software tools for managing, analyzing, and visualizing those data. In a broader sense, one may consider such a system to also include human users and support staff, procedures and workflows, body of knowledge of relevant concepts and methods, and institutional organizations.

Computer simulation Process of mathematical modelling, performed on a computer

Computer simulation is the process of mathematical modelling, performed on a computer, which is designed to predict the behaviour of, or the outcome of, a real-world or physical system. The reliability of some mathematical models can be determined by comparing their results to the real-world outcomes they aim to predict. Computer simulations have become a useful tool for the mathematical modeling of many natural systems in physics, astrophysics, climatology, chemistry, biology and manufacturing, as well as human systems in economics, psychology, social science, health care and engineering. Simulation of a system is represented as the running of the system's model. It can be used to explore and gain new insights into new technology and to estimate the performance of systems too complex for analytical solutions.

A GIS software program is a computer program to support the use of a geographic information system, providing the ability to create, store, manage, query, analyze, and visualize geographic data, that is, data representing phenomena for which location is important. The GIS software industry encompasses a broad range of commercial and open-source products that provide some or all of these capabilities within various information technology architectures.

ArcGIS Geographic information system maintained by Esri

ArcGIS is a family of client software, server software, and online geographic information system (GIS) services developed and maintained by Esri. ArcGIS was first released in 1999 and originally was released as ARC/INFO, a command line based GIS system for manipulating data. ARC/INFO was later merged into ArcGIS Desktop, which was eventually superseded by ArcGIS Pro in 2015. ArcGIS Pro works in 2D and 3D for cartography and visualization, and includes Artificial Intelligence (AI).

Spatial analysis Formal techniques which study entities using their topological, geometric, or geographic properties

Spatial analysis or spatial statistics includes any of the formal techniques which studies entities using their topological, geometric, or geographic properties. Spatial analysis includes a variety of techniques, many still in their early development, using different analytic approaches and applied in fields as diverse as astronomy, with its studies of the placement of galaxies in the cosmos, to chip fabrication engineering, with its use of "place and route" algorithms to build complex wiring structures. In a more restricted sense, spatial analysis is the technique applied to structures at the human scale, most notably in the analysis of geographic data or transcriptomics data.

Microsimulation is a category of computerized analytical tools that perform highly detailed analysis of activities such as highway traffic flowing through an intersection, financial transactions, or pathogens spreading disease through a population. Microsimulation is often used to evaluate the effects of proposed interventions before they are implemented in the real world. For example, a traffic microsimulation model could be used to evaluate the effectiveness of lengthening a turn lane at an intersection, and thus help decide whether it is worth spending money on actually lengthening the lane.

Geospatial and Hydrospatial metadata is a type of metadata applicable to geographic data and information. Such objects may be stored in a geographic information system (GIS) or may simply be documents, data-sets, images or other objects, services, or related items that exist in some other native environment but whose features may be appropriate to describe in a (geographic) metadata catalog. Hydrosoatial is used to refer and to focus on the aquatic and coastal zones side.

Map algebra is an algebra for manipulating geographic data, primarily fields. Developed by Dr. Dana Tomlin and others in the late 1970s, it is a set of primitive operations in a geographic information system (GIS) which allows one or more raster layers ("maps") of similar dimensions to produce a new raster layer (map) using mathematical or other operations such as addition, subtraction etc.

3D computer graphics Graphics that use a three-dimensional representation of geometric data

3D computer graphics, sometimes called CGI, 3DCGI or three-dimensional computer graphics, are graphics that use a three-dimensional representation of geometric data that is stored in the computer for the purposes of performing calculations and rendering 2D images. The resulting images may be stored for viewing later or displayed in real time. Unlike 3D film and similar techniques, the result is two-dimensional, without the illusion of being solid.

Integrated Land and Water Information System (ILWIS) is a geographic information system (GIS) and remote sensing software for both vector and raster processing. Its features include digitizing, editing, analysis and display of data, and production of quality maps. ILWIS was initially developed and distributed by ITC Enschede in the Netherlands for use by its researchers and students. Since 1 July 2007, it has been released as free software under the terms of the GPL-2.0-only license. Having been used by many students, teachers and researchers for more than two decades, ILWIS is one of the most user-friendly integrated vector and raster software programmes currently available. ILWIS has some very powerful raster analysis modules, a high-precision and flexible vector and point digitizing module, a variety of very practical tools, as well as a great variety of user guides and training modules all available for downloading. The current version is ILWIS 3.8.6. Similar to the GRASS GIS in many respects, ILWIS is currently available natively only on Microsoft Windows. However, a Linux Wine manual has been released.

Groundwater models are computer models of groundwater flow systems, and are used by hydrologists and hydrogeologists. Groundwater models are used to simulate and predict aquifer conditions.

SahysMod

SahysMod is a computer program for the prediction of the salinity of soil moisture, groundwater and drainage water, the depth of the watertable, and the drain discharge in irrigated agricultural lands, using different hydrogeologic and aquifer conditions, varying water management options, including the use of ground water for irrigation, and several crop rotation schedules, whereby the spatial variations are accounted for through a network of polygons.

TerrSet Windows GIS and remote sensing software

TerrSet is an integrated geographic information system (GIS) and remote sensing software developed by Clark Labs at Clark University for the analysis and display of digital geospatial information. TerrSet is a PC grid-based system that offers tools for researchers and scientists engaged in analyzing earth system dynamics for effective and responsible decision making for environmental management, sustainable resource development and equitable resource allocation.

SaltMod

SaltMod is computer program for the prediction of the salinity of soil moisture, groundwater and drainage water, the depth of the watertable, and the drain discharge (hydrology) in irrigated agricultural lands, using different (geo)hydrologic conditions, varying water management options, including the use of ground water for irrigation, and several cropping rotation schedules. The water management options include irrigation, drainage, and the use of subsurface drainage water from pipe drains, ditches or wells for irrigation.

3D city model

A 3D city model is digital model of urban areas that represent terrain surfaces, sites, buildings, vegetation, infrastructure and landscape elements in three-dimensional scale as well as related objects belonging to urban areas. Their components are described and represented by corresponding two- and three-dimensional spatial data and geo-referenced data. 3D city models support presentation, exploration, analysis, and management tasks in a large number of different application domains. In particular, 3D city models allow "for visually integrating heterogeneous geoinformation within a single framework and, therefore, create and manage complex urban information spaces."

This is a glossary of terms relating to computer graphics.

EMIGMA is a geophysics interpretation software platform developed by Petros Eikon Incorporated for data processing, simulation, inversion and imaging as well as other associated tasks. The software focuses on non-seismic applications and operates only on the Windows operating system. It supports files standard to the industry, instrument native formats as well as files used by other software in the industry such as AutoCAD, Google Earth and Oasis montaj. There is a free version of EMIGMA called EMIGMA Basic developed to allow viewing of databases created by licensed users. It does not allow data simulation nor modeling nor data import. The software is utilized by geoscientists for exploration and delineating purposes in mining, oil and gas and groundwater as well as hydrologists, environmental engineers, archaeologists and academic institutions for research purposes. Principal contributors to the software are R. W. Groom, H. Wu, E. Vassilenko, R. Jia, C. Ottay and C. Alvarez.

The total operating characteristic (TOC) is a statistical method to compare a Boolean variable versus a rank variable. TOC can measure the ability of an index variable to diagnose either presence or absence of a characteristic. The diagnosis of presence or absence depends on whether the value of the index is above a threshold. TOC considers multiple possible thresholds. Each threshold generates a two-by-two contingency table, which contains four entries: hits, misses, false alarms, and correct rejections.

Land change modeling Geographic and ecological field of study

Land change models (LCMs) describe, project, and explain changes in and the dynamics of land use and land-cover. LCMs are a means of understanding ways that humans change the Earth's surface in the past, present, and future.

CLUE model is a spatially explicit land-use change model developed to simulate future land-use and land-cover changes, including urban expansion, deforestation, land abandonment, and agricultural intensification. CLUE model is a dynamic modeling framework which simulates land-use change based on quantification of biophysical and human drivers of land-use conversion. The CLUE model can be applied at the national and continental scale, implemented in Central America, Ecuador, China, and Java, Indonesia. CLUE model cannot be employed at regional level. Different versions of CLUE model include CLUE-S, CLUE-Scanner, and Dyna-CLUE models.

References

  1. 1 2 3 4 5 6 Pontius, R. G., Cornell, J. D., & Hall, C. A. (2001). Modeling the spatial pattern of land-use change with GEOMOD2: application and validation for Costa Rica. Agriculture, Ecosystems & Environment, 85(1), 191-203.
  2. 1 2 3 4 5 6 Pontius Jr, R. G., & Chen, H. (2006). GEOMOD modeling. Clark University.
  3. ↑ Dushku, A., & Brown, S. (2003, October). Spatial modeling of baselines for LULUCF Carbon projects: The GEOMOD modeling approach. In 2003 International Conference on Topical Forests and Climate Change:" Carbon Sequestration and the Clean Development Mechanism (Vol. 39).
  4. ↑ de Benito, B. P., & de Peñas, J. G. (2008). Greenhouses, land use change, and predictive models: MaxEnt and Geomod working together. In Modelling environmental dynamics (pp. 297-317). Springer Berlin Heidelberg.
  5. ↑ Batchu, K., & Pontius, R.G. (2003). Using the Relative Operating Characteristic to Quantify Certainty in Prediction of Location of Land Cover Change in India. Trans. GIS, 7, 467-484.
  6. ↑ Modeling Deforestation in TerrSet , retrieved 2021-12-12
  7. ↑ ClarkUGIS. "Modeling Deforestation in TerrSet_哔哩哔哩_bilibili". www.bilibili.com. Retrieved 2021-12-12.

Further reading

  1. Chen, Hao and Robert Gilmore Pontius Jr. (2011). Sensitivity of a land change model to pixel resolution and precision of the independent variable. Environmental Modeling & Assessment 16: 37–52.
  2. Chen, Hao and Robert Gilmore Pontius Jr. (2010). Diagnostic tools to evaluate a spatial land change projection along a gradient of an explanatory variable. Landscape Ecology 25: 1319–1331.
  3. Dushku, A., & Brown, S. (2003, October). Spatial modeling of baselines for LULUCF Carbon projects: The GEOMOD modeling approach. In 2003 International Conference on Topical Forests and Climate Change:" Carbon Sequestration and the Clean Development Mechanism (Vol. 39).
  4. Menon, Shaily, Robert Gilmore Pontius Jr, Joseph Rose, M L Kahn, and Kamal S Bawa. (2001). Identifying conservation priority areas in the tropics: a land-use change modeling approach. Conservation Biology 15(2): 501–512.
  5. Pontius, R. G., Boersma, W., Castella, J. C., Clarke, K., de Nijs, T., Dietzel, C., ... & Koomen, E. (2008). Comparing the input, output, and validation maps for several models of land change. The Annals of Regional Science, 42(1), 11–37.
  6. Pontius Jr, Robert Gilmore and Neeti Neeti. (2010). Uncertainty in the difference between maps of future land change scenarios. Sustainability Science 5: 39–50.
  7. Pontius Jr, Robert Gilmore and Silvia Petrova. (2010). Assessing a predictive model of land change using uncertain data. Environmental Modeling & Software 25(3): 299–309.
  8. Pontius Jr, Robert Gilmore, Wideke Boersma, Jean-Christophe Castella, Keith Clarke, Ton de Nijs, Charles Dietzel, Zengqiang Duan, Eric Fotsing, Noah Goldstein, Kasper Kok, Eric Koomen, Christopher D. Lippitt, William McConnell, Alias Mohd Sood, Bryan Pijanowski, Snehal Pithadia, Sean Sweeney, Tran Ngoc Trung, A. Tom Veldkamp, and Peter H. Verburg. (2008). Comparing the input, output, and validation maps for several models of land change. The Annals of Regional Science 42(1): 11–47.
  9. Pontius Jr, Robert Gilmore, Anna J Versluis and Nicholas R Malizia. (2006). Visualizing certainty of extrapolations from models of land change. Landscape Ecology 21(7): 1151–1166.
  10. Pontius Jr, Robert Gilmore and Joseph Spencer. (2005). Uncertainty in extrapolations of predictive land change models. Environment and Planning B: Planning and Design 32:211-230.
  11. Pontius Jr, Robert Gilmore and Pablo Pacheco. (2004). Calibration and validation of a model of forest disturbance in the Western Ghats, India 1920 - 1990. GeoJournal 61(4): 325–334.
  12. Pontius Jr, Robert Gilmore, Aditya Agrawal and Diana Huffaker. 2003. Estimating the uncertainty of land-cover extrapolations while constructing a raster map from tabular data. Journal of Geographical Systems 5(3): 253–273.
  13. Rashmi, M. K., & Lele, N. (2010). Spatial modeling and validation of forest cover change in Kanakapura region using GEOMOD. Journal of the Indian Society of Remote Sensing, 38(1), 45–54.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.