Gepanzerte Pioniermaschine (GPM) was the design for two prototype armored engineer vehicles for the Bundeswehr.
At the end of the 1960s, it was determined hitherto the forward troops demanded a better answer than the Pionierpanzer 2 currently in use, and in 1972, research began on the development of an improved successor. The firms Eisenwerke Kaiserslautern (EWK, now Santa Barbara Systems, a division of General Dynamics) and Maschinenbau Kiel (MAK) were each commissioned to build prototypes.
MAK's Gepanzerte Pioniermaschine prototype being transported.MAK's Gepanzerte Pioniermaschine on field trials, January 1977.
Hull, running gear, and drivetrain were derived from the Bergepanzer 2A1.
GPM 1 MAK (Maschinenbau Kiel)
Frame-arm line dredge in a rotating citadel (resembling a turret)
Range of motion 360°
Arrangements for the vehicle commander, dredging operator, and driver
Amidships on the left and right sides are folding 3.75m diameter scissor spades to hold the vehicle stationary and prevent it moving when deployed
Digging performance: about 300 m³ (10,600 ft³)/h
Trenching depth of the digging shovel: about 5 m (15 ft)
35 ton capacity winch
Gradient crossing assisted by digging shovel: about 70%
Operator and vehicle commander in turret
Weight 55 tons maximum
Due to the overweight of the system, the engine compartment was covered with an aluminum plate
With the digging shovel sideways, despite suggestions, it is incapable of digging the road out from under itself.
EWK's Gepanzerte Pioniermaschine prototype on field trials, January 1977.EWK's prototype, snorkel deployed, after deep wading.
The crew space features driver (and dozer blade operator) in front, telescoping arms operator and vehicle commander in a row behind him
Usually the driver operates with the right telescoping arm and the operator with the left telescoping arm. The operator was able to work with both telescoping arms and oversteering the driver.
Adjustable-angle dozer blade
Digging performance: about 300 m³ (10,600 ft³)/h
Gradient crossing assisted by digging shovel telescoping arms (pushing): about 85%
Trenching depth: about 6 m (20 ft) (4.5 m {15 ft} without shovel operator being able to observe the work)
35 ton capacity winch
Weight 57 tons maximum
Trials were carried out between 1976 and 1980 and were successfully completed at the Pionierschule (Army School for Engineers and Construction) in Munich (now in Ingolstadt) and at Bundeswehr Engineers Equipment an Fuel Transportation Systems Test Center (ErprSt 51/now WTD 51), Koblenz.
Several problems remained unresolved:
The total weight was too much for drivetrain and chassis
The overall workmanship did not meet requirements
The hydraulics were too complex and troublesome
The interior layout was entirely wrong
The project was better shown the door rather than pay for correcting the problems
Bundeswehr decided instead of developing the Pionierpanzer Dachs, it would work on improving the existing PiPz 1. The main outstanding task is the replacement of the single arm crane of the PiPz 1 with the EWK's telescoping shovel.
Sources
F.M. von Senger und Etterlin: Tanks of the World 1983. Arms and Armor Press, London 1983, ISBN0-85368-585-1
Vorl. Technische Dienstvorschrift: Gepanzerte Pioniermaschine. GPM 1 und GPM 2, Teil 22. BmVg 1974
Related Research Articles
A military engineering vehicle is a vehicle built for construction work or for the transportation of combat engineers on the battlefield. These vehicles may be modified civilian equipment or purpose-built military vehicles. The first appearance of such vehicles coincided with the appearance of the first tanks, these vehicles were modified Mark V tanks for bridging and mine clearance. Modern military engineering vehicles are expected to fulfill numerous roles such as; bulldozer, crane, grader, excavator, dump truck, breaching vehicle, bridging vehicle, military ferry, amphibious crossing vehicle, and combat engineer section carrier.
Excavators are heavy construction equipment primarily consisting of a boom, dipper, bucket and cab on a rotating platform known as the "house" - although the largest form ever, the dragline excavator, eliminated the dipper in favor of a line and winch.
A bulldozer or dozer is a large, motorized machine equipped with a metal blade to the front for pushing material: soil, sand, snow, rubble, or rock during construction work. It travels most commonly on continuous tracks, though specialized models riding on large off-road tires are also produced. Its most popular accessory is a ripper, a large hook-like device mounted singly or in multiples in the rear to loosen dense materials.
Heavy equipment, heavy machinery, earthmovers, construction vehicles, or construction equipment, refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. Heavy equipment usually comprises five equipment systems: the implement, traction, structure, power train, and control/information.
The M728 Combat Engineer Vehicle (CEV) is a full-tracked vehicle used for breaching, obstacle removal, and pioneering operations. Production commenced in 1965 and ceased in 1987. A total of 312 of all variants of these armored engineer vehicles were produced.
A dragline excavator is a heavy-duty excavator used in civil engineering and surface mining. It was invented in 1904, and presented an immediate challenge to the steam shovel and its diesel and electric powered descendant, the power shovel. Much more efficient than even the largest of the latter, it enjoyed a heyday in extreme size for most of the 20th century, first becoming challenged by more efficient rotary excavators in the 1950s, then superseded by them on the upper end from the 1970s on.
A steam shovel is a large steam-powered excavating machine designed for lifting and moving material such as rock and soil. It is the earliest type of power shovel or excavator. Steam shovels played a major role in public works in the 19th and early 20th century, being key to the construction of railroads and the Panama Canal. The development of simpler, cheaper diesel, gasoline and electric shovels caused steam shovels to fall out of favor in the 1930s.
The Panzerfaust 3 is a modern semi-disposable recoilless anti-tank weapon, which was developed between 1978 and 1985 and first entered service with the Bundeswehr in 1987. It was first ordered in 1973 to provide West German infantry with an effective weapon against contemporary Soviet armor, thereby replacing West Germany's aging PzF 44 Light Lanze launchers and the heavy Carl Gustaf 84 mm anti-tank recoilless rifle manufactured in Sweden.
An armoured recovery vehicle (ARV) is typically a powerful tank or armoured personnel carrier (APC) chassis modified for use during combat for military vehicle recovery (towing) or repair of battle-damaged, stuck, and/or inoperable armoured fighting vehicles, such as tanks and armoured personnel carriers. Most ARVs have motorized tracks, like a tank or bulldozer, enabling the ARV to operate on uneven ground. The term "armoured repair and recovery vehicle" (ARRV) is also used.
The armored bulldozer is a basic tool of combat engineering. These combat engineering vehicles combine the earth moving capabilities of the bulldozer with armor which protects the vehicle and its operator in or near combat. Most are civilian bulldozers modified by addition of vehicle armor/military equipment, but some are tanks stripped of armament and fitted with a dozer blade. Some tanks have bulldozer blades while retaining their armament, but this does not make them armored bulldozers as such, because combat remains the primary role—earth moving is a secondary task.
The M9 armored combat earthmover (ACE) is a highly mobile armored tracked vehicle that provides combat engineer support to frontline forces. Fielded by the United States Marine Corps, and the United States Army, its tasks include eliminating enemy obstacles, maintenance and repair of roads and supply routes, and construction of fighting positions.
The M939 is a 5-ton 6×6 U.S. military heavy truck. The basic cargo versions were designed to transport a 10,000 pounds (4,500 kg) cargo load over all terrain in all weather. Designed in the late 1970s to replace the M39 and M809 series of trucks, it has been in service ever since. The M939 evolved into its own family of cargo trucks, dump trucks, semi-tractors, vans, wreckers, and bare chassis/cabs for specialty bodies. 44,590 in all were produced.
The Engin Blindé du Génie is a French military engineering vehicle. Its chassis is that of the AMX-30 battle tank.
The Panzerkampfwagen I was a light tank produced in Germany in the 1930s. The Panzer I was built in several variants and was the basis for a number of variants listed below.
Armoured Vehicle Royal Engineers (AVRE), also known as Assault Vehicle Royal Engineers, is the title given to a series of armoured military engineering vehicles operated by the Royal Engineers (RE) for the purpose of protecting engineers during frontline battlefield operations.
The M74 tank recovery vehicle (M74) was an engineer vehicle used by the U.S. Army in the 1950s. It was designed to cope with the heavier weights of the M26 Pershing and M47 Patton. It could also be suitable for light dozing, since it had a hydraulic, front-mounted spade. 1126 were produced by Bowen-McLaughlin-York by converting M4A3 Sherman tanks starting in 1954. From 1956, 60 M32B3A1s were converted by Rock Island Arsenal until 1958.
The Willys MC, formally the 1⁄4-Ton, 4 x 4, Utility Truck M38, or the G‑740 by its U.S. Army Standard Nomenclature supply catalog designation, is a quarter-ton four-wheel drive military light utility vehicle made by Willys between 1949 and 1952. It replaced, and succeeded the World War II Willys MB and Ford GPW models, with a total production of some 50,000 units — less than one tenth the number of WWII models built. Unlike during WWII, Ford was no longer involved in the production.
The Entpannungspanzer 65 is a Swiss armored recovery vehicle developed by Eidgenoessische Konstruktionswerkstaette Thun in the late 1960s. The vehicle served as a traveling workshop for the Swiss military.
The AEV 3 Kodiak is a Leopard 2 main battle tank (MBT) based armoured engineering vehicle that can be used for a wide variety of battlefield engineering, infrastructure and support roles. These roles can include, but would not be limited to, minefield breaching, route denial, dozing and digging tasks, and the erection or demolition of obstacles. The vehicle was originally developed for a Swiss Army requirement by the consortium of Rheinmetall Landsysteme GmbH (Germany) and RUAG Defence (Switzerland).
General Dynamics European Land Systems (GDLS) is an automotive and arms manufacturer spread across Europe, with a headquarter in Madrid, Spain. It is a business unit of General Dynamics which consolidated in one structure all European subsidiaries of GDLS.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
