HMS Conflict (1846)

Last updated

History
NameHMS Conflict
Ordered5 February 1845
Builder Pembroke Dockyard
Laid downJuly 1845
Launched5 August 1846
Commissioned4 October 1849
Honours and
awards
Baltic 1854 - 55 [1]
FateSold 1863 for breaking
General characteristics [2]
TypeFirst-class sloop
Displacement1,628 tons
Tons burthen1,03869/94 bm
Length
  • 192 ft 6+12 in (58.7 m) (gundeck)
  • 172 ft 3+12 in (52.5 m) (keel for tonnage)
Beam34 ft 4 in (10.5 m) maximum, 34 ft 4 in (10.5 m) for tonnage
Draught15 ft 9 in (4.8 m) mean
Depth of hold22 ft 8+12 in (6.9 m)
Installed power
Propulsion
  • 4-cylinder horizontal single-expansion steam engine
  • Single screw
Sail plan Full-rigged ship
Complement175
Armament

Conflict was originally slated to be built to the Sampson designed steam vessel rated as a Steam Vessel First Class (SV1); however, the Admiralty, first rerated the vessels as First Class Sloops on 19 April 1845 then on 9 May 1845, she was ordered from a design of Sir William Symonds,Surveyor of the Navy. [3] Originally designated as 10-gun vessels with 400 NHP engines. She served in the Baltic during the Russian war of 1854 - 55. She was sold for breaking in 1863. [2]

Contents

Conflict was the fourth named vessel since its introduction for a 12-gun gun brig launched by Dudman at Deptford on 17 April 1801 and wrecked on the French Coast on 24 October 1804. [4]

Construction

Her keel was laid in July 1845 at HM Royal Dockyard, Pembroke, and launched on 5 August 1846. She was towed to Wigram's Yard, Blackwall, London to be lengthened in early 1848. [3] The lengthening was to facilitate the installation of her propeller. During trials Conflict's engine generated 772  ihp (576 kW) for a speed of 9.378 knots. Conflict was completed for sea on 20 November 1849 at a cost of: Hull – £20,496; machinery – £21,514; lengthening – £5,410; and fitting – £11,088. [3]

Commissioned Service

First Commission

Her first commission was on 4 October 1849 at Plymouth under Commander Thomas G. Drake, RN for service on the East Coast Of South America. [5] She changed commanders to Acting Commander Robert Jenner, RN on 15 December 1851 before returning to Home Waters and paying off at Portsmouth on 4 June 1852. [6] [3]

Grand Review at Spithead, 11 August 1853. Conflict and Magicienne, in a mock battle with boats. Illustrated London News 1853 Grand Review at Spithead, the Boat Attack - ILN-1853-0820-0028.jpg
Grand Review at Spithead, 11 August 1853. Conflict and Magicienne, in a mock battle with boats. Illustrated London News 1853

Second Commission

She recommissioned at Plymouth for service in the Baltic during the Russian War on 25 February 1854 under Captain John Foote, RN. Captain John Foote, was drowned off Memel (now Klaipėda in Lithuania) on 18 April 1854. [3] Commander Arthur Cumming, RN took command on 19 April. [7] She was involved in the actions at Liepaja and Riga. On 17 May 1854, he took Conflict and Amphion (Captain Astley Cooper Key) into Libau (modern Liepāja in Latvia), occupied the town and seized eight Russian merchant vessels, without firing a single shot. [8] On 7 February 1855 Commander Stephen S.L. Crofton took Command. [8] On 16 March 1855 Commander Francis T. Brown, RN took command. [9] She returned to Devonport in June 1855. On 9 July 1855 she was under the command of Commander William Charles Chamberlain, RN. [10] On 21 February 1856 she was under commad of Commander Thomas Cochrane, RN preparing for deployment to the Mediterranean Station. [11] [3] She returned to Home Waters, paying off at Plymouth on 24 February 1857. [3]

Third Commission

Her last commission started on 29 August 1857 under Commander Richard W. Courtenay, RN for service on the West Coast of Africa. She returned to Home Waters at the end of 1859. [3]

Disposition

Upon her arrival in Home Waters, she paid off at Plymouth on 13 December 1859. She was sold in 1863. [3]

HMS Conflict was awarded the Battle Honour Baltic 1854 – 55. [1]

Notes

  1. 1 2 Rif Winfield, Battles and Campaigns
  2. 1 2 Winfield (2004), p.212
  3. 1 2 3 4 5 6 7 8 9 RWinfield, Chapter 12
  4. Colledge2006
  5. Navy List January 1850, Item140
  6. Navy List, January 1852, Item 124
  7. Navy List, January 1855, Item 124
  8. 1 2 The Victorian Navy
  9. The Navy List, July 1855, Item 124
  10. The Navy List, October 1855, Item 124
  11. The Navy List, April 1856, Item 124

Related Research Articles

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Miranda</i> (1851) Sloop of the Royal Navy

HMS Miranda was a 14-gun wooden screw sloop of the Royal Navy. As part of the 1847 Program, she was designed by John Fincham, Master Shipwright of Portsmouth ,and is considered an improved Rattler, with the design approved on 3 November 1847. She was ordered on 25 April 1847 with the name Grinder from Royal Dockyard, Sheerness. On 3 November 1847, she was reordered as Miranda from Sheerness Dockyard. Launched in 1851, she was completed to see action in the Crimean War. In 1854 she was in the White Sea and participated in the bombardment of the Port of Kola. She then served in the Sea of Azov during 1855. Two of her crew were awarded the Victoria Cross for their bravery. Towards the end of her career she transported troops during the New Zealand Wars. She was reclassified as a corvette by 1862. She was sold for breaking in December 1869.

HMS <i>Sans Pareil</i> (1851) Ship of the line of the Royal Navy

HMS Sans Pareil was a 70-gun screw propelled ship of the line of the Royal Navy.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Malacca</i> (1853) Sloop of the Royal Navy

HMS Malacca was a 17-gun wooden sloop of the Royal Navy. She was ordered on 9 November 1847 from Moulmein, Burma to be built of teak. As a Surveyor's Department design, Malacca was based on the Conflict designed sloop which was approved on 9 December 1848. After launching in April 1853 she was commissioned the following month to be sailed to England for the fitting of her engine. She entered British Naval service in 1854 and served three commissions including action in the Russian War 1854 - 55 before being sold in 1869. Her resale to Japan, she served in the Japanese Navy as a training ship until broken in 1906.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

HMS <i>Desperate</i> (1849) Sloop of the Royal Navy

HMS Desperate was originally slated to be built to the Sampson designed steam vessel rated as a Steam Vessel First Class (SV1); however, the Admiralty, first rerated the vessels as First Class Sloops on 19 April 1845 then on the 9 May 1845, she was ordered as First-Class screw sloops to be built from a design of Sir William Symonds, Surveyor of the Navy. She would be a 10-gun vessel with 400 NHP engines. She served in the Baltic during the Crimean war, and as a store ship to Edward Augustus Inglefield's Arctic expedition. She was broken up by 1865.

HMS Archer was initially ordered as one of two Rifleman type gunvessels on 25 April 1846. With her construction suspended in September 1846, she was reordered on as a sloop on 25 April 1847 to be constructed to a design of John Edye as approved on 25 August. With the exception of two years on Baltic service during the Russian War of 1854 to 1855 she spent the majority on the West Coast of Africa on the anti-slavery patrol. This service involved anti-slavery work on the coasts of the Bight of Benin, and was notoriously unhealthy, with tropical diseases taking a heavy toll of British seamen. One of her commanders died and three others were invalided. Archer was reclassified as a corvette in 1862. She finally returned to Home waters, being sold for breaking in January 1866

HMS <i>Wasp</i> (1850) Sloop of the Royal Navy

HMS Wasp was an Archer type sloop ordered on 25 April 1847 from Deptford Dockyard. Two references stipulate that Parthian, ordered with Archer the year prior was renamed Wasp when ordered as a sloop. However, Parthian remained on the books at Deptford, as a Rifleman type gunvessel until cancelled in June 1849. Therefore Wasp was a new build. She served on many different stations during her career, including West Coast of Africa, in the Mediterranean and Black Sea during the Russian War of 1854 - 55, on the South East Coast of America, Cape of Good Hope where she went aground twice and the East Indies before being sold for breaking in December 1869.

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham, 2nd Baronet gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

HMS Volcano was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. She was launched in 1836. Her first few commissions were on packet service in the Mediterranean and North American and West Indies Stations and on the anti-slavery patrol on the West Coast of Africa. In 1854 she was converted to a factory ship and served in the Baltic during the Russian War. She was sent to China during the Second Opium War as a factory ship. On her return she was assigned to Portsmouth, on Harbour Service as a stationary factory ship. She remained there until sold for breaking in 1894.

HMS Stromboli was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Portsmouth. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was used as a troop transport in the Baltic in 1854, she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was on the South East Coast of America. She was sold for breaking in August 1866.

HMS Vesuvius was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Sheerness. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was in the West Indies. She was sold for breaking in June 1865.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Prometheus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served mainly on the west coast of Africa on the anti-slavery patrol except for a brief period on particular service in the Black Sea in late 1855. She was sold on 5 March 1863 for breaking.

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

HMS Inflexible was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the East Indies and participated in the last year of the New Zealand War of 1845 to 1847. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Scourge was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. She was initially commissioned for service with the Channel Squadron before moving to the North America and West Indies Station. She then served in the Mediterranean then the west coast of Africa. Her final service was in the Mediterranean. She was broken in 1865.

HMS <i>Bulldog</i> (1845) Sloop of the Royal Navy

HMS Bulldog was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the Cape of Good Hope. She then was in the Baltic Sea for the Russian War. She carried out ocean sounding for the Atlantic telegraph. She was lost while in action with the Haitians in 1865.

HMS Fury was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. She was ordered on 19 February 1844. After commissioning she sailed for the East Indies and participated in action against pirate junks near Vietnam. She then was in the Black Sea for the Crimean War followed by the Second Opium War with China. She was sold for breaking in July 1864.

References