This article needs additional citations for verification .(December 2009) |
Hard and soft light are different types of lighting that are commonly used in photography and filmmaking. Soft light is light that tends to "wrap" around objects, projecting diffused shadows with soft edges, whereas hard light is more focused and produces harsher shadows.
The hardness or softness of light depends mostly on three features of the source: the size of its surface, its distance from the object, and the thickness of its diffusion material. A large, distant light source with thick diffusion material will produce softer lighting than one that is smaller and closer to the subject, with thinner diffusion material.
Soft light tends to "wrap" around subjects, producing shadows with soft, fuzzy edges. [1] [2] Softness of light increases with the size of the light source, as the emitted light rays will travel in many directions as they move toward the subject. [3] Light sources can also produce softer light by using diffusion material (like in a softbox) or by bouncing the light off a surface (like with a reflector). [3]
Soft light use is popular in photography and cinematography. By diffusing hard shadows, softening dark areas, and removing sharp edges, soft light produces more flattering images of the human form. [4] Colours may also appear richer and more realistic. [1]
Hard light comes from a single, usually bright, source, which is relatively small compared to the subject. [2] [3] Photographs taken in such lighting have high contrast and sharply defined shadows. [1] The appearance of the shadow depends on the lighting instrument. For example, Fresnel lights can be focused such that their shadows can be "cut" with crisp shadows. That is, the shadows produced will have 'harder' edges with less transition between illumination and shadow. The focused light will produce harder-edged shadows. Focusing a Fresnel lens makes the rays of emitted light more parallel. The parallelism of these rays determines the quality of the shadows. For shadows with no transitional edge/gradient, a point light source is required. Hard light casts strong, well defined shadows.
When hitting a textured surface at an angle, hard light will accentuate the textures and details in an object. This will also increase the 3D-appearance of the object.
Light intensity tends to dim with distance. For a point source of light, intensity decreases as distance increases. Intensity (I) is inversely proportional to the square of the distance (D), as expressed in the formula I = 1⁄D2.
For a thin infinitely long light source, intensity is inversely proportional to distance. For a light source of infinite area, intensity does not decrease at all. Generally, a soft light source does not drop in intensity as quickly as a point light source would (as distance increases).
Certain lensed lighting instruments (e.g. ellipsoidal reflector spotlights) have a good deal of "throw" and do not lose much intensity as distance increases. These light sources tend to be more effective at large distances than soft light sources. At large distances, an effective soft light source would have to be very large. The (mostly) parallel rays of such instruments tends to cast hard shadows, unlike soft light sources.
Most light sources have a non-negligible size and therefore exhibit the properties of a soft light to some degree. Even direct sunlight does not cast perfectly hard shadows.
In "hard" light sources, the parallelism of the rays is an important factor in determining shadow behaviour.
The quality of light can be altered by using diffusion gel or aiming a lighting instrument at diffusing material such as a silk. When shooting outdoors, cloud cover provides nature's version of a softbox.
Stage lighting is the craft of lighting as it applies to the production of theater, dance, opera, and other performance arts. Several different types of stage lighting instruments are used in this discipline. In addition to basic lighting, modern stage lighting can also include special effects, such as lasers and fog machines. People who work on stage lighting are commonly referred to as lighting technicians or lighting designers.
A retroreflector is a device or surface that reflects radiation back to its source with minimum scattering. This works at a wide range of angle of incidence, unlike a planar mirror, which does this only if the mirror is exactly perpendicular to the wave front, having a zero angle of incidence. Being directed, the retroflector's reflection is brighter than that of a diffuse reflector. Corner reflectors and cat's eye reflectors are the most used kinds.
A flash is a device used in photography that produces a brief burst of light at a color temperature of about 5500 Kelvin to help illuminate a scene. A major purpose of a flash is to illuminate a dark scene. Other uses are capturing quickly moving objects or changing the quality of light. Flash refers either to the flash of light itself or to the electronic flash unit discharging the light. Most current flash units are electronic, having evolved from single-use flashbulbs and flammable powders. Modern cameras often activate flash units automatically.
A shadow is a dark area where light from a light source is blocked by an object. It occupies all of the three-dimensional volume behind an object with light in front of it. The cross section of a shadow is a two-dimensional silhouette, or a reverse projection of the object blocking the light.
An overhead projector, like a film or slide projector, uses light to project an enlarged image on a screen, allowing the view of a small document or picture to be shared with a large audience.
Optics is the branch of physics which involves the behavior and properties of light, including its interactions with matter and the construction of instruments that use or detect it. Optics usually describes the behavior of visible, ultraviolet, and infrared light. Because light is an electromagnetic wave, other forms of electromagnetic radiation such as X-rays, microwaves, and radio waves exhibit similar properties.
A zone plate is a device used to focus light or other things exhibiting wave character. Unlike lenses or curved mirrors, zone plates use diffraction instead of refraction or reflection. Based on analysis by French physicist Augustin-Jean Fresnel, they are sometimes called Fresnel zone plates in his honor. The zone plate's focusing ability is an extension of the Arago spot phenomenon caused by diffraction from an opaque disc.
A gobo is an object placed inside or in front of a light source to control the shape of the emitted light and its shadow.
Ellipsoidal reflector spot is the name for a type of stage lighting instrument, named for the ellipsoidal reflector used to collect and direct the light through a barrel that contains a lens or lens train. The optics of an ERS instrument are roughly similar to those of a 35 mm slide projector.
The key light is the first and usually most important light that a photographer, cinematographer, lighting cameraman, or other scene composer will use in a lighting setup. The purpose of the key light is to highlight the form and dimension of the subject. The key light is not a rigid requirement; omitting the key light can result in a silhouette effect. Many key lights may be placed in a scene to illuminate a moving subject at opportune moments.
In television, film, stage, or photographic lighting, a fill light may be used to reduce the contrast of a scene to match the dynamic range of the recording media and record the same amount of detail typically seen by eye in average lighting and considered normal. From that baseline of normality, using more or less fill will make shadows seem lighter or darker than normal, which will cause the viewer to react differently, by inferring both environmental and mood clues from the tone of the shadows.
A Fresnel lantern is a common lantern used in theatre that employs a Fresnel lens to wash light over an area of the stage. The lens produces a wider, soft-edged beam than a spotlight or key light, and is commonly used for back light and top light.
Stage lighting instruments are used in stage lighting to illuminate theatrical productions, concerts, and other performances taking place in live performance venues. They are also used to light television studios and sound stages.
Portrait photography, or portraiture, is a type of photography aimed toward capturing the personality of a person or group of people by using effective lighting, backdrops, and poses. A portrait photograph may be artistic or clinical. Frequently, portraits are commissioned for special occasions, such as weddings, school events, or commercial purposes. Portraits can serve many purposes, ranging from usage on a personal web site to display in the lobby of a business.
In optics, a diffuser is any material that diffuses or scatters light in some manner to transmit soft light. Diffused light can be easily obtained by reflecting light from a white surface, while more compact diffusers may use translucent material, including ground glass, teflon, opal glass, and greyed glass.
In photography and cinematography, a reflector is an improvised or specialised reflective surface used to redirect light towards a given subject or scene.
Photographic lighting refers to how a light source, artificial or natural, illuminates the scene or subject that is photographed. Photographers can manipulate the positioning and the quality of a light source to create visual effects, potentially changing aspects of the photograph such as clarity, tone and saturation to create an accurate rendition of the scene.
A beauty dish is a photographic lighting device that uses a parabolic reflector to distribute light towards a focal point. The light created is between that of a direct flash and a softbox, giving the image a wrapped, contrasted look, which adds a more dramatic effect.
Bron Elektronik is a manufacturer of flash equipment for photography and videography. It is located in Allschwil in Switzerland. Bron manufactures the broncolor lines of strobes, which include studio lighting systems with separate power packs and heads, as well as monolights. Both lines include light modifiers. The Focal Encyclopedia of Photography describes broncolor as "the leading Swiss manufacturer" of generator flash systems.
Stage lighting accessories are components manufactured for conventional (non-automated) stage lighting instruments. Most conventional fixtures are designed to accept a number of different accessories designed to assist in the modification of the output. These accessories are intended to either provide relatively common functionality not originally provided in a fixture, or to extend the versatility of a lighting instrument by introducing features. Other accessories have been designed to overcome limitations or difficulties some fixtures present in specific applications.