Heliodisplay

Last updated

The Heliodisplay is an air-based display using principally air that is already present in the operating environment (room or space). The system developed by IO2 Technology in 2001 uses a projection unit focused onto multiple layers of air and dry micron-size atomized particles in mid-air, resulting in a two-dimensional display that appears to float (3d when using 3d content). This is similar in principle to the cinematic technique of rear projection and can appear three-dimensional when using appropriate content. As dark areas of the image may appear invisible, the image may be more realistic than on a projection screen, although it is still not volumetric. However the system does allow for multiple viewing and dual viewing (back and front) when combined with two light sources. The necessity of an oblique viewing angle +/- 30 degrees may be required for various configurations due to the rear-projection requirement.

Contents

Heliodisplay can operate as a free-space touchscreen when the equipment is ordered as an interactive unit with embedded sensors in the equipment. The original prototype of 2001 used a PC that sees the Heliodisplay as a pointing device, like a mouse. With the supplied software installed, one can use a finger, pen, or another object as cursor control and navigate or interact with simple content. As of 2010, no computer or drivers are required. The interactive version ("i") of the heliodisplay contains an embedded processor that controls these functions internally for single touch, or multiple touch interactivity using an equipment mounted arrangement but without the IR laser field found on the earlier versions. The smaller Heliodisplay version is transportable at 4 kilograms (8.8 lb) and is as big as a lunchbox (30 cm x 30 cm x 12 cm) similar to the 2002 version. The larger equipment such as the systems that project life-size people capable of image diagonals up to 2.3 m also have the same footprint, about the same size as a sheet of paper. [1]

The air-based system is formed by a series of metal plates, and the original Heliodisplay could run for several hours although current models can operate continuously. [2] 2008 model Heliodisplays use 80 ml to 120 ml of water per hour (most used for cooling), depending on screen size and user settings, although the medium is primarily air. Various versions of the heliodisplay work predominantly from the surrounding air (such as under museum environments) where there are negligible affect to the surrounding space. A tissue paper can be left on the exhaust side of the unit for a 24-hour period without any effect of moisture to it as compared to other mist or fog generating equipment that relies more on pumping a liquid or vaporizer and thereby affecting the surrounding air.

The Heliodisplay was invented by Mr. Dyner, who built it as a five-inch interactive prototype in 2000-2001 before patenting the free-space display technology. The original system used a CMOS camera and IR laser to track the position of a finger in mid-air and update the projected image to enable the first of its kind co-located display with mid-air controller interface. IO2 Technology commercialized the original versions along with improvements over the years in developing the product line. The Heliodisplay is sold directly worldwide by IO2 Technology with offices in The Bay Area of Northern California.

Models

M1

The original M1 units produced by IO2 were advanced prototypes and proof-of-concept. These are the first Heliodisplay developed by the IO2 Technology. They have all the above said properties. But they have less fidelity than the future systems although adopted various ion-discharge plates [3] and showcased in 2003. [4] This first generation Heliodisplay supported only a 22” image and utilized an IR light source and an IR camera to track the position of a finger for cursor controlling the images.

M2

The second-generation M2 Heliodisplay supports a 30" image with 16.7 million colours and a 2000:1 contrast ratio. The interactive M2i version includes virtual touchscreen capability.

M3 and M30

The new third-generation M3 version launched on February 28, 2007 [5] has the same basic specifications as the M2 but is said to be much quieter, with improved brightness and clarity and more stable operation with an improved tri-flow system.

Apart from displaying at a standard ratio of 4:3 it also displays 16:9 widescreen ratio. There is also an interactive version called the M3i. [6]

The M30 is the updated version of the M3, which fits into the current model numbering system, 30 designating the diagonal screen size.

M50 and M100

In late 2007, IO2 Technology introduced two larger Heliodisplays, the M50 and M100. The M50 has a 50" diagonal image, equivalent to displaying a life-size head-and-shoulders person. The M100 has a 100" diagonal image, equivalent to displaying a large full-body person (about 2 meters tall).

Piezoelectric ultrasonic transducer used to vaporize water for a Heliodisplay. Heliodisplay Piezo.jpg
Piezoelectric ultrasonic transducer used to vaporize water for a Heliodisplay.

S and L and XL

In 2011 IO2 reintroduced the smaller format Heliodisplays along with the standard L(large) models that project approximately 2 meter tall image (for lifesize person projections). The L models can be placed on the floor as a standing tower and take up slightly more area that a sheet of paper (14 inches in diameter) and weigh in around 70 lbs (35 kg) allowing it to be moved around by one person. Power consumption for the base tower 2 meter version is as energy efficient as the legacy models and consumes around 300 watts. The system is based on improvements to the M100, and similarly, the s (small) models over the legacy versions of the m30 both in image and user interface. The XL model is a separate system that supports larger format images beyond the 2 meter range. All units from 2009 have a simple interface with a single on/off button and power cord.

i versions

IO2 incorporated various advances to the existing platforms and most equipment weight was reduced by close to 50%. Current 2.3 meter system now weigh closer to 38 lb (17.2 kg), along with a 20% reduction in form factor and footprint. Equipment efficiency was improved to over 90%, while still maintaining its relatively quiet operation of around 39 dB (as compared to other fan based technologies). Image recovery time is under 1.0 seconds in some models, along with wireless communication to limit the cables to only the power cord. Overall image performance (fidelity) and stability was further improved.

Related Research Articles

<span class="mw-page-title-main">Computer monitor</span> Computer output device

A computer monitor is an output device that displays information in pictorial or textual form. A discrete monitor comprises a visual display, support electronics, power supply, housing, electrical connectors, and external user controls.

<span class="mw-page-title-main">Plasma display</span> Type of flat panel display

A plasma display panel (PDP) is a type of flat panel display that uses small cells containing plasma: ionized gas that responds to electric fields. Plasma televisions were the first large flat panel displays to be released to the public.

<span class="mw-page-title-main">Home cinema</span> Home entertainment system that aims to replicate the experience of a movie theater

Home cinema, also called home theaters or theater rooms, are home entertainment audio-visual systems that seek to reproduce a movie theater experience and mood using consumer electronics-grade video and audio equipment that is set up in a room or backyard of a private home. Some studies show that films are rated better and generate more intense emotions when watched in a movie theater, but convenience is a major appeal for home cinemas. In the 1980s, home cinemas typically consisted of a movie pre-recorded on a LaserDisc or VHS tape; a LaserDisc Player or VCR; and a heavy, bulky large-screen cathode ray tube TV set, although sometimes CRT projectors were used instead. In the 2000s, technological innovations in sound systems, video player equipment and TV screens and video projectors have changed the equipment used in home cinema set-ups and enabled home users to experience a higher-resolution screen image, improved sound quality and components that offer users more options. The development of Internet-based subscription services means that 2020s-era home theatre users do not have to commute to a video rental store as was common in the 1980s and 1990s.

<span class="mw-page-title-main">LCD projector</span> Type of video projector

An LCD projector is a type of video projector for displaying video, images or computer data on a screen or other flat surface. It is a modern equivalent of the slide projector or overhead projector. To display images, LCD projectors typically send light from a metal-halide lamp through a prism or series of dichroic filters that separates light to three polysilicon panels – one each for the red, green and blue components of the video signal. As polarized light passes through the panels, individual pixels can be opened to allow light to pass or closed to block the light. The combination of open and closed pixels can produce a wide range of colors and shades in the projected image.

<span class="mw-page-title-main">Video projector</span> Device that projects video onto a surface

A video projector is an image projector that receives a video signal and projects the corresponding image onto a projection screen using a lens system. Video projectors use a very bright ultra-high-performance lamp, Xenon arc lamp, metal halide lamp, LED or solid state blue, RB, RGB or remote fiber-optic RGB lasers to provide the illumination required to project the image. Most modern projectors can correct any curves, blurriness and other inconsistencies through manual settings.

<span class="mw-page-title-main">Digital Light Processing</span> Set of chipsets

Digital Light Processing (DLP) is a set of chipsets based on optical micro-electro-mechanical technology that uses a digital micromirror device. It was originally developed in 1987 by Larry Hornbeck of Texas Instruments. While the DLP imaging device was invented by Texas Instruments, the first DLP-based projector was introduced by Digital Projection Ltd in 1997. Digital Projection and Texas Instruments were both awarded Emmy Awards in 1998 for the DLP projector technology. DLP is used in a variety of display applications from traditional static displays to interactive displays and also non-traditional embedded applications including medical, security, and industrial uses.

A television set or television receiver is an electronic device for the purpose of viewing and hearing television broadcasts, or as a computer monitor. It combines a tuner, display, and loudspeakers. Introduced in the late 1920s in mechanical form, television sets became a popular consumer product after World War II in electronic form, using cathode ray tube (CRT) technology. The addition of color to broadcast television after 1953 further increased the popularity of television sets in the 1960s, and an outdoor antenna became a common feature of suburban homes. The ubiquitous television set became the display device for the first recorded media for consumer use in the 1970s, such as Betamax, VHS; these were later succeeded by DVD. It has been used as a display device since the first generation of home computers and dedicated video game consoles in the 1980s. By the early 2010s, flat-panel television incorporating liquid-crystal display (LCD) technology, especially LED-backlit LCD technology, largely replaced CRT and other display technologies. Modern flat panel TVs are typically capable of high-definition display and can also play content from a USB device. Starting in the late 2010s, most flat panel TVs began to offer 4K and 8K resolutions.

Pixels per inch (ppi) and pixels per centimetre are measurements of the pixel density of an electronic image device, such as a computer monitor or television display, or image digitizing device such as a camera or image scanner. Horizontal and vertical density are usually the same, as most devices have square pixels, but differ on devices that have non-square pixels. Pixel density is not the same as resolution — where the former describes the amount of detail on a physical surface or device, the latter describes the amount of pixel information regardless of its scale. Considered in another way, a pixel has no inherent size or unit, but when it is printed, displayed, or scanned, then the pixel has both a physical size (dimension) and a pixel density (ppi).

<span class="mw-page-title-main">LCD television</span> Television set with liquid-crystal display

A liquid-crystal-display television is a television set that uses a liquid-crystal display to produce images. It is by far the most widely produced and sold type of television display. LCD TVs are thin and light, but have some disadvantages compared to other display types such as high power consumption, poorer contrast ratio, and inferior color gamut.

A volumetric display device is a display device that forms a visual representation of an object in three physical dimensions, as opposed to the planar image of traditional screens that simulate depth through a number of different visual effects. One definition offered by pioneers in the field is that volumetric displays create 3D imagery via the emission, scattering, or relaying of illumination from well-defined regions in (x,y,z) space.

<span class="mw-page-title-main">Real-time computer graphics</span> Sub-field of computer graphics

Real-time computer graphics or real-time rendering is the sub-field of computer graphics focused on producing and analyzing images in real time. The term can refer to anything from rendering an application's graphical user interface (GUI) to real-time image analysis, but is most often used in reference to interactive 3D computer graphics, typically using a graphics processing unit (GPU). One example of this concept is a video game that rapidly renders changing 3D environments to produce an illusion of motion.

<span class="mw-page-title-main">Interactive whiteboard</span> Large interactive display

An interactive whiteboard (IWB), also known as interactive board or smart board, is a large interactive display board in the form factor of a whiteboard. It can either be a standalone touchscreen computer used independently to perform tasks and operations, or a connectable apparatus used as a touchpad to control computers from a projector. They are used in a variety of settings, including classrooms at all levels of education, in corporate board rooms and work groups, in training rooms for professional sports coaching, in broadcasting studios, and others.

<span class="mw-page-title-main">Digital signage</span> Sub-segment of electronic signage

Digital signage is a segment of electronic signage. Digital displays use technologies such as LCD, LED, projection and e-paper to display digital images, video, web pages, weather data, restaurant menus, or text. They can be found in public spaces, transportation systems, museums, stadiums, retail stores, hotels, restaurants and corporate buildings etc., to provide wayfinding, exhibitions, marketing and outdoor advertising. They are used as a network of electronic displays that are centrally managed and individually addressable for the display of text, animated or video messages for advertising, information, entertainment and merchandising to targeted audiences.

<span class="mw-page-title-main">Sony Reader</span> Line of e-book readers manufactured by Sony

The Sony Reader (ソニー・リーダー) was a line of e-book readers manufactured by Sony. The first model was the PRS-500 released in September 2006 and was related to the earlier Sony Librie, the first commercial E Ink e-reader in 2004 using an electronic paper display developed by E Ink Corporation. The last model was the PRS-T3, after which Sony announced it would no longer release a new consumer e-reader.

Laser color television, or laser color video display, is a type of television that utilizes two or more individually modulated optical (laser) rays of different colors to produce a combined spot that is scanned and projected across the image plane by a polygon-mirror system or less effectively by optoelectronic means to produce a color-television display. The systems work either by scanning the entire picture a dot at a time and modulating the laser directly at high frequency, much like the electron beams in a cathode ray tube, or by optically spreading and then modulating the laser and scanning a line at a time, the line itself being modulated in much the same way as with digital light processing (DLP).

<span class="mw-page-title-main">Large-screen television technology</span> Technology rapidly developed in the late 1990s and 2000s

Large-screen television technology developed rapidly in the late 1990s and 2000s. Prior to the development of thin-screen technologies, rear-projection television was standard for larger displays, and jumbotron, a non-projection video display technology, was used at stadiums and concerts. Various thin-screen technologies are being developed, but only liquid crystal display (LCD), plasma display (PDP) and Digital Light Processing (DLP) have been publicly released. Recent technologies like organic light-emitting diode (OLED) as well as not-yet-released technologies like surface-conduction electron-emitter display (SED) or field emission display (FED) are in development to supercede earlier flat-screen technologies in picture quality.

<span class="mw-page-title-main">Korg M3</span> Music workstation

Korg M3 is a music workstation synthesizer manufactured by Korg Corporation and introduced at the NAMM Show in January 2007, being released four months later. The M3 is the successor of the famous Triton series. The name is based on the former M1, which was considered a revolutionary synth at the time.

<span class="mw-page-title-main">Rear-projection television</span> Type of large-screen television display technology

Rear-projection television (RPTV) is a type of large-screen television display technology. Until approximately 2006, most of the relatively affordable consumer large screen TVs up to 100 in (250 cm) used rear-projection technology. A variation is a video projector, using similar technology, which projects onto a screen.

<span class="mw-page-title-main">Microsoft PixelSense</span> Interactive surface computing platform by Microsoft

Microsoft PixelSense was an interactive surface computing platform that allowed one or more people to use and touch real-world objects, and share digital content at the same time. The PixelSense platform consists of software and hardware products that combine vision based multitouch PC hardware, 360-degree multiuser application design, and Windows software to create a natural user interface (NUI).

Vuzix is an American multinational technology company headquartered in Rochester, New York and founded by Paul Travers in 1997. Vuzix is a supplier of wearable virtual reality and augmented reality display technology. Vuzix manufactures and sells computer display devices and software. Vuzix head-mounted displays are marketed towards mobile and immersive augmented reality applications, such as 3D gaming, manufacturing training, and military tactical equipment. On January 5, 2015, Intel acquired 30% of Vuzix's stock for $24.8 million.

References

  1. "Archived copy" (PDF). Archived from the original (PDF) on 2015-01-30. Retrieved 2014-03-12.{{cite web}}: CS1 maint: archived copy as title (link)
  2. David Bernstein. Making Something Out of Nothing. December 18, 2003.
  3. "IO2 Technology / Holographic Systems and Solutions". Archived from the original on 2016-08-08. Retrieved 2014-03-12.
  4. "IO2 Technology / Holographic Systems and Solutions". Archived from the original on 2016-08-08. Retrieved 2014-03-12.
  5. IO2 Technology intros floating M3 Heliodisplay screen
  6. "IO2Technology M3". Archived from the original on 2007-03-24. Retrieved 2007-03-25.

Media

Early footage (~2002)

More recent footage