Historical F4U Corsair

Last updated

F4U Corsair
Role Homebuilt aircraft
National origin United States
Manufacturer Historical Aircraft Corporation
StatusProduction completed
Developed from Chance-Vought F4U Corsair

The Historical F4U Corsair is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 60% scale replica of the original Chance-Vought F4U Corsair and when it was available was supplied as a kit for amateur construction. [1]

Contents

Design and development

The aircraft features a cantilever low gull wing, a single-seat enclosed cockpit under a bubble canopy, retractable conventional landing gear and a single engine in tractor configuration. [1]

The aircraft is made from welded steel tubing covered in a shell of polyurethane foam and fiberglass. Its 24.80 ft (7.6 m) span wing, mounts flaps and has a wing area of 127.5 sq ft (11.85 m2). The cockpit width is 21 in (53 cm). The standard engine used is the 230 hp (172 kW) Ford Motor Company V-6 automotive conversion powerplant. [1]

The aircraft has a typical empty weight of 1,405 lb (637 kg) and a gross weight of 2,004 lb (909 kg), giving a useful load of 599 lb (272 kg). With full fuel of 45 U.S. gallons (170 L; 37 imp gal) the payload for pilot and baggage is 329 lb (149 kg). [1]

The aircraft has fairly lengthy runway requirements with a standard day sea level take-off distance of 1,200 ft (366 m) and a landing distance of 1,500 ft (457 m). [1]

The kit included prefabricated assemblies, the engine and scale fixed pitch propeller, instruments and avionics. The manufacturer estimated the construction time from the supplied kit as 2000 hours. [1]

Specifications (F4U)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

Bradley Aerobat American homebuilt aircraft

The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

Aircraft Technologies Acro 1 American homebuilt airplane

The Aircraft Technologies Acro 1 is an American aerobatic homebuilt aircraft that was designed by Fred Meyer and produced by Aircraft Technologies of Lilburn, Georgia. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. Neither plans nor kits are available anymore and the aircraft is out of production.

The Amax Vixen 105 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit for amateur construction.

Frontier MD-II

The Frontier MD-II was an American homebuilt aircraft that was designed and supplied as a kit by Frontier Aircraft Inc of Vail, Colorado, introduced in the 1990s.

The Historical P-51 Mustang is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original North American P-51 Mustang and when it was available was supplied as a kit for amateur construction.

The Historical P-40C Tomahawk is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original Curtiss P-40C Tomahawk and when it was available was supplied as a kit for amateur construction.

The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.

Letov ST-4 Aztek

The Letov ST-4 Aztek is a Czech microlight aircraft that was designed and produced by Letov Kbely of Prague - Letňany, in the 1990s. When it was available, the aircraft was supplied as a complete ready-to-fly aircraft, or as a kit for amateur construction.

The Mirage Marathon is an American homebuilt aircraft, designed and produced by Mirage Aircraft Corporation of Prescott Valley, Arizona. The aircraft is supplied in the form of plans for amateur construction, with materials kits supplied by Aircraft Spruce & Specialty Co. and Wicks Aircraft Supply as well as some specialized parts supplied by the manufacturer.

Olympic Desert Eagle

The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.

The Stewart S-51D Mustang is an American aerobatic homebuilt aircraft that was designed by Jim Stewart and produced by Stewart 51 of Vero Beach, Florida, introduced in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

The Time Warp Spitfire Mk V is an American homebuilt aircraft that was designed and produced by Time Warp Aircraft of Lakeland, Florida, introduced in 1996 at Sun 'n Fun. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL XC 2000T is an American homebuilt and ultralight trainer aircraft that was designed and produced by V-STOL Aircraft of Fort Myers, Florida, introduced in the fall of 1997. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL Super Solution 2000 is an American STOL homebuilt aircraft that was designed by Dick Turner and produced by V-STOL Aircraft Corporation of Fort Myers, Florida. When it was available the aircraft was supplied as a kit for amateur construction.

Bede BD-12 American homebuilt airplane

The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.

Specter Aircraft Specter II

The Specter Aircraft Specter II was an American homebuilt aircraft that was designed and produced by Specter Aircraft of Bancroft, Idaho, introduced in 1997. When it was available the aircraft was supplied as a kit for amateur construction.

The Stargate YT-33 is an American homebuilt aircraft that was designed and produced by Stargate, Inc of McMinnville, Oregon, introduced in 1994. The aircraft is a 2/3 scale replica of the Lockheed T-33 jet trainer.

The V-STOL Pairadigm is an American twin-engine center-line thrust STOL homebuilt aircraft that was designed and produced by V-STOL Aircraft Corporation of Fort Myers, Florida, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 176. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.