The CBX Prefix has been used by a number of motorcycles built by Honda.
Fast, heavy, complicated and powerful, the CBX1000 remains a sought-after collectible. It started life as an unfaired "sports" bike. Honda later added a fairing, retuned the engine, changed the suspension, and the bike was reclassified as a sports tourer.
The CBX 250 is a motorcycle that has been manufactured and sold in Brazil since 2001. [1]
Better known as the Twister in South America, it replaced the CBX 200 Strada that finished production in 2002. The Twister is also sold in Argentina, Mexico and South Africa, [2] and is exported to Europe and Australia under the name CBF250.
Also available were the DOHC four-cylinder 16-valve CBX750, CBX650, CBX550, CBX400 and the single-cylinder CBX250. The CBX550 [3] and CBX400 featured inboard disc brakes that were designed to mitigate problems caused by wet-weather braking. The CBX550 had two internally ventilated cast iron disks up front with inside-out dual piston calipers and a single enclosed disk system in the rear. The very similar CBX400 made do with an enclosed single disc in the front. The enclosed disc brake was also used on some models of the VTR250 and the VF400. The system was less accessible for servicing than conventional disc brakes and there were also reports of heat dissipation problems. Modern braking materials have since rendered any improvement obsolete. The CBX750, CBX550 and CBX400 also featured Honda's rising-rate Pro-Link mono-shock rear suspension design and were available in standard and half-faired versions. The CBX250 was not imported into the US, and was imported for only one year in Canada. It is thought that 6-7 were imported to New Zealand but documentation is difficult to acquire.
The CB Series is an extensive line of Honda motorcycles. Most CB models are road-going motorcycles for commuting and cruising. The smaller CB models are also popular for vintage motorcycle racing. All CB series motorcycles have inline engines. The related Honda CBR series are sport bikes.
The Honda XR series is a range of four-stroke off-road motorcycles that were designed in Japan but assembled all over the world.
The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.
Universal Japanese Motorcycle (UJM) is a US motorcycling media term for a general-purpose style of Japanese standard motorcycle that revolutionized the industry and made motorcycling in America more accessible during the 1970s and 1980s. By around 1990 its popularity began to wane as the market fragmented into more specialized designs.
The Suzuki GS series was Suzuki Motor Corporation's first full range of 4-stroke powered road motorcycles, having previously almost exclusively manufactured 2-stroke machines. Suzuki had produced the 4-stroke Colleda COX 125cc and 93cc 4-stroke single-cylinder machines in 1955 however the rest of Suzuki's production from 1952 to 1976 had been increasingly sophisticated two-stroke road machines, whose ultimate expression was the 750cc 3-cylinder water-cooled GT750.
The Suzuki Bandit is a series of standard motorcycles produced by Suzuki since 1989. The Bandit series includes the following models:
The Honda CBX sports motorcycle was manufactured by Honda from 1978 to 1982. With a 1047cc inline six-cylinder engine producing 105 bhp (78 kW), it was the flagship of the Honda range. The CBX was well-received by the press, but was outsold by its sibling introduced in late 1979, the Honda CB900F.
The VF1000 is a range of motorcycles produced by Honda from 1984 to 1988. The VF1000 is named after its V-4 998 cc (60.9 cu in) double overhead cam 16-valve engine. There were three main models in the VF1000 range, the VF1000F, the VF1000R and the VF1000F2.
The Honda CB900C is a cruiser motorcycle produced by Honda from 1980 to 1982 primarily for the American market. It was succeeded by the CB1000C in 1983.
The Ducati SuperSport and SS are a series of air-cooled four stroke desmodromic 2-valve 90° L-twin motorcycles made by Ducati since 1988. A limited edition SuperSport called the SuperLight was sold in 1992. The name harked back to the round case 1973 Ducati 750 Super Sport, and the 1975 square case 750 and 900 Super Sport. The appellation 'SS' was applied only to the later belt drive (Pantah) based models.
The VT250 or Spada MC20 is a Honda motorcycle built between late 1988 and the end of 1989.
The Honda CBR1000F Hurricane is a sport touring motorcycle, part of the CBR series manufactured by Honda from 1987 to 1996 in the United States and from 1987 to 1999 in the rest of the world. It is powered by a liquid-cooled, DOHC, 998 cc (60.9 cu in), 16-valve inline-four engine. The CBR1000F, along with the CBR750F and CBR600F, was Honda's first inline four-cylinder, fully-faired sport bike.
The GT series is a series of two-stroke chain drive motorcycles manufactured and marketed by Suzuki for model years 1972-1977, with a range of engine capacities and cylinder counts. Certain markets received the GT380 until model year 1980.
The Honda CB900F is a Honda motorcycle made in two iterations which appeared some twenty years apart. Both generations of the CB900F are straight four-cylinder four-stroke 900 cc (55 cu in) roadsters.
The Honda CB400 Super Four is a CB series 399 cc (24.3 cu in) standard motorcycle produced by Honda at the Kumamoto plant from 1992 to the present. The CB400 embodies the typical Universal Japanese Motorcycle produced through the 1970s, updated with modern technology. To this end, the bike has a naked retro design, paired with a smooth inline-four engine. Originally a Japan-only bike, it was later also available in SE Asia, and from 2008 in Australia.
The Honda CBX400F is a motorcycle manufactured by Honda between 1981 and 1984.
The Honda CBX550F is a four-stroke, in line four cylinder, sport tourer motorcycle produced from 1982 to 1986 by the Honda Motor Company. The CBX550F II is identical apart from the addition of a half-fairing.
Motorcycle braking systems have varied throughout time, as motorcycles evolved from bicycles with an engine attached, to the 220 mph (350 km/h) prototype motorcycles seen racing in MotoGP. Most systems work by converting kinetic energy into thermal energy (heat) by friction. On motorcycles, approximately 70% of the braking effort is performed by the front brake. This however can vary for individual motorcycles; longer-wheelbase types having more weight biased rearward, such as cruisers and tourers, can have a`greater effort applied by the rear brake. In contrast, sports bikes with a shorter wheelbase and more vertical fork geometry can tolerate higher front braking loads. For these reasons, motorcycles tend to have a vastly more powerful front brake compared to the rear.
Magni is an Italian company that builds specialist motorcycles. The company is based in the city of Samarate in the province of Varese. Magni, in addition to building the bikes that bear its name, is also active in the construction of specials to order and a supplier of special parts for the restoration of MV Agusta classic motorcycles.
The Laverda 1000 is a series of 981 cc (59.9 cu in) air cooled DOHC triple motorcycles produced by the Italian manufacturer Laverda between 1973 and 1988. The high-performance variant, the Jota, was the fastest production motorcycle from 1976 to 1981. Approximately 7,100 triples of the various models were produced.