Hondamatic

Last updated
H2
Overview
Manufacturer Honda
Production19731988
Body and chassis
Class 2/3-speed transverse semi-automatic transmission
Chronology
Successor H3
See also list of Honda transmissions for other Hondamatics

The Hondamatic (also called the H2) was Honda's first semi-automatic transmission. It was produced from 1973 through 1988. The Hondamatic name continued to be used on fully-automatic transmissions from Honda. [1]

Contents

Design and Application

The original Hondamatic, like all following Honda automatics, featured gears on parallel axes rather than planetary gears like most other automatic transmissions. The two gears for each ratio - one driving and the other driven - are in constant mesh and each ratio is engaged by a dedicated clutch connected to one of the ratio's two gears. The clutches are hydraulically controlled, applying oil pressure to the desired "gear". Shifting between forward gears was done by simply sliding the gear selector (actually a hydraulic valve) from 1 to 2. It did not automatically shift, but because of the torque converter, could be driven entirely in second gear. The Honda automobile torque converter had a lockup, leading the company to sell the original Hondamatic (which had just two forward gear ratios) as a three-speed. The true three-speed H3 was launched in 1979. In 1982 Honda introduced a four-speed fully-automatic (called Hondamatic Full-Auto), followed by a fully-automatic three-speed in 1983. The semi-automatic version continued to be available in Honda's smaller cars, where it was gradually replaced by conventional automatics. With the 1988 remake of the Honda Acty/Street, the last Hondamatic was discontinued.

Applications:

History

Honda could not make a conventional planetary gearset automatic transmission without infringing on any patents. Honda eventually asked Borg-Warner to design a prototype transmission for their upcoming vehicles. However, Borg-Warner declined. This was due to Borg-Warner not having transmission specifications that were efficient enough for such a small engine like the 500cc Honda S500 and one that was able to be reliable at a maximum engine speed of 8000rpm. This led Honda to design its own transmission. They purchased a transmission from Borg-Warner for the purpose of developing an original transmission design. They tested their newly developed automatic transmission on the L700. When testing and refinements had been made, Honda sold their first automatic transmission in the N360. [2]

Motorcycle

The Hondamatic was later used in Honda's 400, 450 and 750 cc motorcycles. [3] [4] In this application, it was not a true automatic transmission, as the driver had to manually select one of the two gears. The transmission of the 750 Hondamatics incorporated two hydraulically controlled clutches (one for each gear), with the foot-operated gear selector operating the hydraulic valve. The 400/450 Hondamatics, however, have no clutches at all. The foot-operated gear selector physically moves a gear with "dogs" to change gear engagement, the same as on a non-Hondamatic motorcycle transmission.

Applications:

Scooter, ATV, and power equipment

Honda also applies the Hondamatic name to a hydraulic piston-based continuously variable transmission used in motorscooters, all-terrain vehicles, and other types of power equipment.

Applications

See also

Related Research Articles

<span class="mw-page-title-main">Automatic transmission</span> Type of motor vehicle transmission that automatically changes gear ratio as the vehicle moves

An automatic transmission is a multi-speed transmission used in motor vehicles that does not require any input from the driver to change forward gears under normal driving conditions. Vehicles with internal combustion engines, unlike electric vehicles, require the engine to operate in a narrow range of rates of rotation, requiring a gearbox, operated manually or automatically, to drive the wheels over a wide range of speeds.

<span class="mw-page-title-main">Honda CB750 and CR750</span> Four cylinder engine motorcycle

The Honda CB750 is an air-cooled, transverse, in-line-four-cylinder-engine motorcycle made by Honda over several generations for year models 1969–2008 with an upright, or standard, riding posture. It is often called the original Universal Japanese Motorcycle (UJM) and also is regarded as the first motorcycle to be called a "superbike".

<span class="mw-page-title-main">Transmission (mechanical device)</span> Drivetrain transmitting propulsion power

A transmission is a mechanical device which uses a gear set—two or more gears working together—to change the speed, direction of rotation, or torque multiplication/reduction in a machine.

<span class="mw-page-title-main">Continuously variable transmission</span> Automotive transmission technology

A continuously variable transmission (CVT) is an automated transmission that can change through a continuous range of gear ratios. This contrasts with other transmissions that provide a limited number of gear ratios in fixed steps. The flexibility of a CVT with suitable control may allow the engine to operate at a constant angular velocity while the vehicle moves at varying speeds.

A semi-automatic transmission is a multiple-speed transmission where part of its operation is automated, but the driver's input is still required to launch the vehicle from a standstill and to manually change gears. Semi-automatic transmissions were almost exclusively used in motorcycles and are based on conventional manual transmissions or sequential manual transmissions, but use an automatic clutch system. But some semi-automatic transmissions have also been based on standard hydraulic automatic transmissions with torque converters and planetary gearsets.

Toyota Motor Corporation's A family is a family of automatic FWD/RWD/4WD/AWD transmissions built by Aisin-Warner. They share much in common with Volvo's AW7* and Aisin-Warner's 03-71* transmissions, which are found in Suzukis, Mitsubishis, and other Asian vehicles.

<span class="mw-page-title-main">Hydramatic</span> Automatic transmission

Hydramatic is an automatic transmission developed by both General Motors' Cadillac and Oldsmobile divisions. Introduced in 1939 for the 1940 model year vehicles, the Hydramatic was the first mass-produced fully-automatic transmission developed for passenger automobile use.

<span class="mw-page-title-main">TorqueFlite</span> Automatic transmission made by Chrysler

TorqueFlite is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name.

Ultramatic was the trademarked name of the Packard Motor Car Company's automatic transmission introduced in 1949 and produced until 1954, at Packard's Detroit, Michigan, East Grand Boulevard factory. It was produced thereafter from late 1954, thru 1956 at the new Packard "Utica" Utica, Michigan facility.

Ford-O-Matic was the first automatic transmission widely used by Ford Motor Company. It was designed by the Warner Gear division of Borg Warner Corporation and introduced in 1951 model year cars, and was called the Merc-O-Matic when installed in Mercury branded cars and Turbo-Drive when installed in Lincoln branded cars. In contrast to Detroit Gear Division's three band automatic originally designed for Studebaker which became superseded by this unit, a variation of Warner Gear's three-speed unit named Ford-O-Matic continued to evolve later into Cruise-O-Matic named transmissions in 1958 and finally the FMX named transmissions in 1968. This line continued in production until 1980, when the AOD was introduced. Like Ford, variations of this same Borg Warner design were used by other automobile manufacturers as well, such as AMC, International Harvester, Studebaker, Volvo and Jaguar, each of them having the necessary unique adaptations required for the individual applications.

<span class="mw-page-title-main">Mercedes-Benz 7G-Tronic transmission</span> Motor vehicle automatic transmission model

7G-Tronic is Mercedes-Benz's trademark name for its 7-speed automatic transmission, starting off with the W7A 700 and W7A 400 as core models.

A transmission control unit (TCU), also known as a transmission control module (TCM), or a gearbox control unit (GCU), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation. A TCU in a modern automatic transmission generally uses sensors from the vehicle, as well as data provided by the engine control unit (ECU), to calculate how and when to change gears in the vehicle for optimum performance, fuel economy and shift quality.

The Borg-Warner 35 transmission (BW-35) is an automatic transmission produced by the BorgWarner company. This article also applies to variations—the M-36 and M-37. When this article refers to "M-3x" it refers to all models. When model number specific it will use the exact model number.

Mercedes-Benz 4G-Tronic transmission is the unofficial name given to the transmission by car enthusiasts. It was produced from 1979 to 1996 in W4A 040, W4A 028, W4A 020, and W5A 030 variants.

<span class="mw-page-title-main">Cross-drive steering transmission</span>

A cross-drive steering transmission is a transmission, used in tracked vehicles to allow precise and energy-efficient steering.

<span class="mw-page-title-main">Dual-clutch transmission</span> Type of vehicle transmission

A dual-clutch transmission (DCT) is a type of multi-speed vehicle transmission system, that uses two separate clutches for odd and even gear sets. The design is often similar to two separate manual transmissions with their respective clutches contained within one housing, and working as one unit. In car and truck applications, the DCT functions as an automatic transmission, requiring no driver input to change gears.

<span class="mw-page-title-main">Motorcycle transmission</span> Transmission for motorcycle applications

A motorcycle transmission is a transmission created specifically for motorcycle applications. They may also be found in use on other light vehicles such as motor tricycles and quadbikes, go-karts, offroad buggies, auto rickshaws, mowers, and other utility vehicles, microcars, and even some superlight racing cars.

<span class="mw-page-title-main">Mercedes-Benz 9G-Tronic transmission</span> Motor vehicle automatic transmission models

9G-Tronic is Mercedes-Benz's trademark name for its 9-speed automatic transmission, starting off with the W9A 700 as core model. The transmission debuted on the E 350 BlueTEC in 2013, and successively replaced both the 7-speed 7G-Tronic (PLUS) transmission and the 5-speed 5G-Tronic transmission. It includes versions for a maximum input torque of 1,000 N⋅m (738 lb⋅ft).

The Mercedes-Benz first series of automatic transmission was produced from 1961 to 1983 in 4- and 3-speed variants for Mercedes-Benz passenger cars. In addition, variants for commercial vehicles were offered.

References

  1. "Honda Global | the Hondamatic Transmission / 1968".
  2. "Honda Global - Honda Motor Co., Ltd". Global.honda. Retrieved 10 March 2019.
  3. Motorcycle Classics Nov/Dec 2011: The Honda CB750A Hondamatic
  4. Assoc, American Motorcyclist (1 September 1977). "American Motorcyclist". American Motorcyclist Assoc. Retrieved 10 March 2019 via Google Books.