Hydrosteer

Last updated

Hydrosteer was the name given by George Kent Ltd and Cam Gears Limited through Hydrosteer Limited [1] of Luton, England, to its automotive power steering system. Initially Hydrosteer manufactured the Ross-Link system for commercial vehicles from 1953 under licence from Ross Gear and Tool of U.S.A. [2] Their own product available from 1961 was based on a cam and peg system and was characterised by its fully integrated design and variable steering ratio. This configuration provided automotive manufacturers with a fairly simple design modification to provide a power steering option for cars fitted with a conventional cam and peg steering box. It was fitted to several, mainly British, luxury automobiles of the era. Production continued up to 1973, with just over 105,000 units being produced. As a "first generation" assistance system, applications were somewhat varied in their tuning of the many system dynamics to the specific vehicle. The system fell out of use as powered rack and pinion steering systems gained in popularity.

Contents

The 1960s Hydrosteer system should not be confused with Hydrosteer Pty Ltd, an Australian company established in 1981 as a provider of heavy truck steering technology in that country.

Adoption

The Hydrosteer power steering system was fitted to the following cars:

Austin Westminster A110 (optional)
Facel Vega II (optional)
Humber Super Snipe Series V (optional)
Humber Imperial
Rover P5 3-Litre Mark 1a (optional)
Rover P5 3-Litre Mark 2 Saloon and Coupe
Rover P5 3-Litre Mark 3 Saloon and Coupe
Rover P5B 3.5-Litre Saloon and Coupe
Vanden Plas Princess 3 Litre Mk II (optional)
Vanden Plas Princess 4-Litre R
Wolseley 6/110 (optional)

Operation

[3] The Hydrosteer system was based on a conventional cam-and-peg mechanism, except that the cam is surrounded by the skirt of a piston within the body of the steering box. Hydraulic power from the power steering pump is transmitted directly from the piston to the peg carrier. A spool type hydraulic valve moves along the axis of the cam in response to steering wheel movement, causing oil pressure to be applied to one side or other of the piston according to the direction the steering wheel is turned, and the load on the input and output shafts.

The cam track is not a regular helix but varies in pitch angle and depth. The variation in steering ratio between straight ahead and full lock results from the variance in pitch angle of the track. The more the steering wheel is turned, the lower the steering ratio becomes. In the Rover P5B, for example, [4] the ratio of the power steering unit was 16:1 at the straight ahead and 11.3:1 at full lock.

The effect of the variable ratio is to give very light and relaxed steering at the straight ahead, with increased reaction when cornering. The system was designed to be fail-safe, so that the driver should still be able to steer in the event of a failure of the power system.

Benefits and drawbacks

The major benefit of the Hydrosteer system is reduction in the amount of steering effort required of the driver, particularly at low road speeds or when a lot of turning is involved. Also, the Hydrosteer system was fully integrated into the steering box with no external jacks, giving it an advantage over earlier systems with external jacks, which needed more space and were heavier.

Whilst advanced for its time, the Hydrosteer system did have certain drawbacks, in common with all variable ratio steering systems of the era. It was more complicated and expensive than a constant ratio power assisted system. The Hydrosteer system was also criticised for feeling far too light under most circumstances. An article in Car magazine in January 1968 [5] on the Rover P5B was particularly scathing about the lightness and lack of feel of Hydrosteer steering. Similar criticism appeared in other contemporary road test articles on the Rover and Vanden Plas 4-Litre R. Much of the blame for this may lie with the cars' manufacturers, who would have instructed Hydrosteer what to supply in terms of number of turns lock-to-lock and degree of power assistance.

Use of the Hydrosteer system in cars effectively died out with the generation of 1960s models to which it was fitted. For example, the Rover P6B 3500S that followed the Rover P5B used the Marles Varamatic variable ratio system, which was slightly heavier in most circumstances than the Rover P5 system and arguably had more road feel, although that system too failed to survive much beyond the 1970s.

Related Research Articles

Austin Princess Motor vehicle

The Austin Princess is a series of large luxury cars that were made by Austin and its subsidiary Vanden Plas from 1947 to 1968. The cars were also marketed under the Princess and Vanden Plas marque names.

The Princess is a version of the Austin A99 Westminster produced by BMC from 1959 to 1968, latterly under the Vanden Plas marque.

Triumph Stag Motor vehicle

The Triumph Stag is a 2+2 sports tourer which was sold between 1970 and 1978 by the British Triumph Motor Company, styled by Italian designer Giovanni Michelotti.

Jaguar XJ Series of full-size luxury cars manufactured by British automobile manufacturer Jaguar since 1968

The Jaguar XJ is a series of full-size luxury cars produced by British automobile manufacturer Jaguar Cars from 1968 to 2019. It was produced across five basic platform generations with various updated derivatives of each. From 1970 it was Jaguar's flagship four door model. The original model was the last Jaguar saloon to have had the input of Sir William Lyons, the company's founder, and the model has been featured in countless media and high-profile appearances.

Jaguar Mark X Motor vehicle

The Jaguar Mark X, later renamed the Jaguar 420G, was British manufacturer Jaguar's top-of-the-range saloon car for a decade, from 1961 to 1970. The large, luxurious Mark X succeeded the Mark IX as the company's top saloon model, and was primarily aimed at the United States market. The company hoped that the car would appeal to heads of state, diplomats and film stars.

Rover 75 Motor vehicle

The Rover 75 is an executive car manufactured initially by the Rover Group and later by MG Rover, under the Rover marque and available over a single generation with front-wheel drive in either saloon/sedan or station wagon/estate configurations. Later variants included an extended-wheelbase model, and a rear-wheel drive variant with a V8 engine. In 2001, MG Rover launched a badge engineered variant, the MG ZT. A coupe concept was built, but did not receive further development.

Triumph Vitesse Motor vehicle

The Triumph Vitesse is a compact six-cylinder car built by Standard-Triumph from May 1962 to July 1971. The car was styled by Giovanni Michelotti, and was available in saloon and convertible variants.

Chrysler Sigma Motor vehicle

The Chrysler Sigma is a version of the Mitsubishi Galant automobile that was built by Chrysler Australia in Adelaide, South Australia from 1977. When Mitsubishi Motors Australia (MMAL) took over Chrysler Australia's manufacturing facilities in 1980, they renamed the vehicle the Mitsubishi Sigma. The range was progressively discontinued and replaced by the Mitsubishi Magna, starting with the sedan in 1985 and the wagon in 1987.

Audi S4 Motor vehicle

The Audi S4 is the high performance variant of Audi's compact executive car A4. The original Audi S4, built from 1991 until 1994, was a performance-oriented version of Audi's 100 saloon/sedan. All subsequent S4s since 1997 have been based on the Audi A4; and as the A4 has evolved from one generation to the next, so has the S4.

Austin Westminster Motor vehicle

The Austin Westminster series are large saloon and estate cars that were sold by the British manufacturer Austin from 1954, replacing the A70 Hereford. The Westminster line was produced as the A90, A95, A99, A105, and A110 until 1968 when the new Austin 3-Litre took its place. Essentially badge-engineered versions of the Farina Westminsters were also produced using the premium Wolseley and Vanden Plas marques. 101,634 Westminsters were built.

Rover P5 Motor vehicle

The Rover P5 series is a group of large saloon and coupé automobiles that were produced by Rover from 1958 until 1973. The models were marketed under the names Rover 3 Litre, Rover 3.5 Litre and Rover 3½ Litre.

Humber Super Snipe Motor vehicle

The Humber Super Snipe is a car which was produced from 1938 to 1967 by British-based Humber Limited.

Rover 200 Coupé Motor vehicle

The Rover 200 Coupé is a two-door coupé that was produced by Rover and based on the Rover 200 Mark II, with most of the body panels and the bumpers unique in the range. The car was launched on 6 October 1992, at the Paris Motor Show. It was given the project code name 'Tomcat' when in development.

IOE engine Type of combustion engines

The intake/inlet over exhaust, or "IOE" engine, known in the US as F-head, is a four-stroke internal combustion engine whose valvetrain comprises OHV inlet valves within the cylinder head and exhaust side-valves within the engine block.

The following outline is provided as an overview of and topical guide to automobiles:

Sunbeam-Talbot 90 Motor vehicle

The Sunbeam-Talbot 90 is an automobile which was produced and built by Sunbeam-Talbot from 1948 to 1954 and continued as the Sunbeam Mk III from 1954 to 1957.

Honda Civic (sixth generation) Motor vehicle

The sixth generation Honda Civic was introduced in 1995 with 3-door hatchback, 4-door sedan and 2-door coupe body styles, replicating its predecessor's lineup. A 5-door hatchback was also produced to replace the Honda Concerto hatchback in Europe but this model, while using the same design language as the rest of the Civic range, was quite distinct, instead being a hatchback version of the Honda Domani, sharing that car's platform which was related to the fifth-generation (EG/EH/EJ) Civic. The Domani replaced the sedan version of the Concerto in Japan while the sedan version of the Concerto was directly replaced by the sixth generation Civic sedan in other markets. Two wagons were also made available; the JDM Orthia, based on the Civic sedan/3-door hatchback line, and a 5-door hatchback/Domani-based model, sold as the Civic Aerodeck, in Europe. Neither were offered in North America. The Civic 5-door hatchback also formed the basis for the 1995 Rover 400 although the 4-door sedan version of the Rover was quite distinct from the Domani.

Alvis Speed 20 Motor vehicle

The Alvis Speed 20 is a British touring car that was made between late 1931 and 1936 by Alvis Car and Engineering Company in Coventry. It went through four variants coded SA to SD.

Jaguar XJ (X350) Motor vehicle

The Jaguar XJ (X350) is a full-size four-door luxury sedan/saloon manufactured and marketed worldwide by Jaguar for model years 2003–2009 as the third generation of the Jaguar XJ saloon — carrying the internal designation X350 and the internal designation X358, following its 2007 intermediate facelift.

Marles steering gear

Marles steering gear was an hour-glass-and-roller steering gear for mechanically propelled vehicles invented by British inventor and businessman Henry Marles (1871-1955) who also gave his name to his joint-venture Ransome & Marles a major British ball-bearing manufacturer. Aside from ease of use Marles' steering's great appeal to drivers was its lack of backlash.

References

  1. ↑ George Kent Limited. The Times, Wednesday, August 24, 1955, Issue 53307, p.13.
  2. ↑ Power Steering Gives Finger-tip Control. Commercial Motor, 4 September 1953. page 39. accessed 1 December 2019
  3. ↑ Hydrosteer Powered Steering, article in Automobile Engineer, May 1960
  4. ↑ Rover 3 & 3.5 Litre Workshop Manual Saloon and Coupe, Rover British Leyland UK Ltd, ISBN   1-85520-144-5
  5. ↑ Rover 3 & 3.5 litre 1958-1973, road tests, Brooklands Books, ISBN   0-907073-73-5
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.