This article relies largely or entirely on a single source .(November 2021) |
Also known as | IBM 4694 printer; Part Number: 93F0463 |
---|---|
Manufacturer | IBM |
Release date | 1991 |
Discontinued | 2005 |
Predecessor | IBM Printer Model 3 |
Successor | IBM 4610 |
Related | IBM 4694 |
The IBM Printer Model 4 was a dot-matrix point-of-sale printer launched in 1991. It was the direct relative and homophone of the IBM Printer Model 3. It and its successor, the IBM 4610, nowadays, it's really few still in use by retailers.[ citation needed ] The printer was discontinued in 2005.
The previous Printer Model 3 was released as part of IBM 4683 POS system equipment line; The Model 4 was a little updated version of Model 3, upgraded to support of new IBM 4694 POS system. [1] However, unlike the Model 2, which could only operate with IBM 4683 POS systems, the Model 3 was compatible with 4694 POS systems. Both the Model 3 and Model 4 printers made the same printing noise since they had the same print engine.
In countries, where cash registers and receipt printers are hardware-fiscalized, fiscal versions were offered, mostly under the name Printer Model 3F. [2] They were essentially Model 4 printers with added regionally-compliant fiscal logic. Both IBM and third-parties produced compliant fiscal logic for fiscalized Model 3F/4 printers. During transition of the industry from dot-matrix to thermal receipt printers, IBM offered 4610 printer models TN3 and TN4 as Model 3F/4 successors for hardware fiscalization, wherever paper journalling continued to be legally practicised before introduction of electronic journalling to the law. Based on dual-station TG3 and TG9 models of 4610 printer respectively, they included an additional thermal printing station specifically for paper journalling.
In computing, a printer is a peripheral machine which makes a persistent representation of graphics or text, usually on paper. While most output is human-readable, bar code printers are an example of an expanded use for printers. Different types of printers include 3D printers, inkjet printers, laser printers, and thermal printers.
A cash register, sometimes called a till or automated money handling system, is a mechanical or electronic device for registering and calculating transactions at a point of sale. It is usually attached to a drawer for storing cash and other valuables. A modern cash register is usually attached to a printer that can print out receipts for record-keeping purposes.
In digital printing, a page description language (PDL) is a computer language that describes the appearance of a printed page in a higher level than an actual output bitmap. An overlapping term is printer control language, which includes Hewlett-Packard's Printer Command Language (PCL). PostScript is one of the most noted page description languages. The markup language adaptation of the PDL is the page description markup language.
A line printer prints one entire line of text before advancing to another line. Most early line printers were impact printers.
Dot matrix printing, sometimes called impact matrix printing, is a computer printing process in which ink is applied to a surface using a relatively low-resolution dot matrix for layout. Dot matrix printers typically use a print head that moves back and forth or in an up-and-down motion on the page and prints by impact, striking an ink-soaked cloth ribbon against the paper. Unlike typewriters or line printers that use a similar print mechanism, a dot matrix printer can print arbitrary patterns and not just specific characters.
A dot matrix is a 2-dimensional patterned array, used to represent characters, symbols and images. Most types of modern technology use dot matrices for display of information, including mobile phones, televisions, and printers. The system is also used in textiles with sewing, knitting and weaving.
Daisy wheel printing is an impact printing technology invented in 1970 by Andrew Gabor at Diablo Data Systems. It uses interchangeable pre-formed type elements, each with typically 96 glyphs, to generate high-quality output comparable to premium typewriters such as the IBM Selectric, but two to three times faster. Daisy wheel printing was used in electronic typewriters, word processors and computers from 1972. The daisy wheel is so named because of its resemblance to the daisy flower.
In computing, a parallel port is a type of interface found on early computers for connecting peripherals. The name refers to the way the data is sent; parallel ports send multiple bits of data at once, as opposed to serial communication, in which bits are sent one at a time. To do this, parallel ports require multiple data lines in their cables and port connectors and tend to be larger than contemporary serial ports, which only require one data line.
The IBM Series/1 is a 16-bit minicomputer, introduced in 1976, that in many respects competed with other minicomputers of the time, such as the PDP-11 from Digital Equipment Corporation and similar offerings from Data General and HP. The Series/1 was typically used to control and operate external electro-mechanical components while also allowing for primitive data storage and handling.
Thermal printing is a digital printing process which produces a printed image by passing paper with a thermochromic coating, commonly known as thermal paper, over a print head consisting of tiny electrically heated elements. The coating turns black in the areas where it is heated, producing an image.
IEEE 1284 is a standard that defines bi-directional parallel communications between computers and other devices. It was originally developed in the 1970s by Centronics, and was widely known as the Centronics port, both before and after its IEEE standardization.
A dot matrix printer is an impact printer that prints using a fixed number of pins or wires. Typically the pins or wires are arranged in one or several vertical columns. The pins strike an ink-coated ribbon and force contact between the ribbon and the paper, so that each pin makes a small dot on the paper. The combination of these dots forms a dot matrix image. They were also known as serial dot matrix printers.
The HP 9800 is a family of what were initially called programmable calculators and later desktop computers that were made by Hewlett-Packard, replacing their first HP 9100 calculator. It is also named "98 line". The 9830 and its successors were true computers in the modern sense of the term, complete with a powerful BASIC language interpreter.
Thermal paper is a special fine paper that is coated with a material formulated to change color when exposed to heat. It is used in thermal printers, particularly in inexpensive or lightweight devices such as adding machines, cash registers, and credit card terminals.
ESC/P, short for Epson Standard Code for Printers and sometimes styled Escape/P, is a printer control language developed by Epson to control computer printers. It was mainly used in dot matrix printers and some inkjet printers, and is still widely used in many receipt thermal printers. During the era of dot matrix printers, it was also used by other manufacturers, sometimes in modified form. At the time, it was a popular mechanism to add formatting to printed text, and was widely supported in software.
4690 Operating System is a specially designed point of sale (POS) operating system, originally sold by IBM. In 2012, IBM sold its retail business, including this product, to Toshiba, which assumed support. 4690 is widely used by IBM and Toshiba retail customers to run retail systems which run their own applications and others.
The IBM 4694 was one of IBM's PC based point of sale (POS) systems, a successor to the IBM 4683 and IBM 4693. Introduced in 1991, the 4694 became a flagship model for the company's SurePOS system. The system consists of a PC-based controller, and PC-based POS Terminals—typically an IBM keyboard and monitor, or touch screen. The system requires the IBM 4694 computer which is used as a "Controller", or also more or less, as a server on the network. The controller can be set up to boot from a floppy disk, or from a main server on a network. The 4694 was a best-selling POS System, widely used in most large chain stores such as supermarkets, department stores and restaurants. The 4694 could still be seen in the wild at US Foot Locker locations until 2020.
The IBM 4610, also known as SureMark, is a thermal point-of-sale printer, originally developed and manufactured by IBM and currently offered by Toshiba Global Commerce Solutions, launched in 1996. It is used by major retailers such as Wal-Mart, Carrefour, Costco, Cencosud, Office Depot, Tesco, Best Buy, Chedraui, King Soopers, London Drugs and Soriana. It had replaced the famous IBM Printer Model 4. With the acquisition of IBM's Retail Store Solutions (RSS) business, the SureMark printers are now produced by Toshiba Global Commerce Solutions.
Fiscalization is fiscal law designed to avoid retailer fraud. Fiscal law about cash registers has been introduced in countries to control the grey economy by enforcing all mandatory transaction reporting to the authorities. According to fiscal law, an appropriate fiscal receipt has to be printed and given to the customer.