Infinity transmitter

Last updated

An infinity transmitter (also known as a harmonica bug) is a surveillance device used to covertly monitor conversation in a room through a telephone line. Its name derives from the fact that, by using a telephone line as a transmitter, it can work at an infinite distance, unlike other bugging devices that have only a finite signal range. [1] The alternative name 'harmonica bug' refers to the fact that such devices were originally activated using the tone produced by a harmonica. [2]

Design of infinity transmitters has varied, according to developments in telephone systems. In some instances, the bug is activated after the target answers and hangs up their phone. In countries where there is a delay between connection and the first ring, the bug can be activated before the target phone rings, so that the infinity transmitter essentially 'answers' the call. In more advanced systems, the transmitter can be placed in a parallel telephone line to prevent the victim's phone line remaining engaged. [2] As modern telephone lines no longer establish a voice path until the call is answered a variant of this now exists that uses CND, or caller ID. Usually an unusual sequence of non printing characters is used and thus will not show up on a display device. Sometimes the caller ID device itself has the bug but it can be nearly anywhere. In much the same manner a cellphone can be configured for silence on ring and auto answer and hidden, frequently placed inside something that has power available to maintain the battery. This allows the infinity transmitter to be hidden inside an automobile or other location where a land line is not an option.

Related Research Articles

A covert listening device, more commonly known as a bug or a wire, is usually a combination of a miniature radio transmitter with a microphone. The use of bugs, called bugging, or wiretapping is a common technique in surveillance, espionage and police investigations.

Enhanced 911 is a system used in North America to automatically provide the caller's location to 911 dispatchers. 911 is the universal emergency telephone number in the region. In the European Union, a similar system exists known as E112 and known as eCall when called by a vehicle.

<span class="mw-page-title-main">Emergency telephone number</span> Telephone number that allows caller to contact local emergency services for assistance

An emergency telephone number is a number that allows a caller to contact local emergency services for assistance. The emergency number differs from country to country; it is typically a three-digit number so that it can be easily remembered and dialed quickly. Some countries have a different emergency number for each of the different emergency services; these often differ only by the last digit.

A dial tone is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized. If no digits are forthcoming, the partial dial procedure is invoked, often eliciting a special information tone and an intercept message, followed by the off-hook tone, requiring the caller to hang up and redial.

Caller identification is a telephone service, available in analog and digital telephone systems, including voice over IP (VoIP), that transmits a caller's telephone number to the called party's telephone equipment when the call is being set up. The caller ID service may include the transmission of a name associated with the calling telephone number, in a service called Calling Name Presentation (CNAM). The service was first defined in 1993 in International Telecommunication Union – Telecommunication Standardization Sector (ITU-T) Recommendation Q.731.3.

<span class="mw-page-title-main">Blue box</span> Device for hacking telephone networks

A blue box is an electronic device that produces tones used to generate the in-band signaling tones formerly used within the North American long-distance telephone network to send line status and called number information over voice circuits. This allowed an illicit user, referred to as a "phreaker", to place long-distance calls, without using the network's user facilities, that would be billed to another number or dismissed entirely as an incomplete call. A number of similar "color boxes" were also created to control other aspects of the phone network.

A ringtone is the sound made by a telephone to indicate an incoming telephone call. Originally referring to the sound of electromechanical striking of bells or gongs, the term refers to any sound by any device alerting of an incoming call.

<span class="mw-page-title-main">Answering machine</span> Telephone answering device

An answering machine, answerphone, or message machine, also known as telephone messaging machine in the UK and some Commonwealth countries, ansaphone or ansafone, or telephone answering device (TAD), is used for answering telephone calls and recording callers' messages.

Black boxes were devices which, when attached to home phones, allowed all incoming calls to be received without charge to the caller.

<span class="mw-page-title-main">Telephone call</span> Connection between two or more people over a telephone network

A telephone call or telephone conversation, also known as a phone call or voice call, is a connection over a telephone network between the called party and the calling party. Telephone calls started in the late 19th century. As technology has improved, a majority of telephone calls are made over a cellular network through mobile phones or over the internet with Voice over IP. Telephone calls are typically used for real-time conversation between two or more parties, especially when the parties cannot meet in person.

Call waiting is a telephone service where a subscriber can accept a second incoming telephone call by placing an in-progress call on hold—and may also switch between calls. With some providers it can be combined with additional features such as conferencing, call forwarding, and caller ID. Call waiting is intended to alleviate the need to have more than one telephone line or number for voice communications.

Call forwarding, or call diversion, is a telephony feature of all telephone switching systems which redirects a telephone call to another destination, which may be, for example, a mobile or another telephone number where the desired called party is available. Call forwarding was invented by Ernest J. Bonanno.

A ringback number is a telephone number for a telephone line that automatically calls the line that the call was placed from, after the caller has hung up. The typical use of this facility is by telephone company technicians for testing a new installation or for trouble-shooting.

Phone fraud, or more generally communications fraud, is the use of telecommunications products or services with the intention of illegally acquiring money from, or failing to pay, a telecommunication company or its customers.

<span class="mw-page-title-main">Caller ID spoofing</span> Phone caller faking the phone number sent to the recipient of a phone call

Caller ID spoofing is a spoofing attack which causes the telephone network's Caller ID to indicate to the receiver of a call that the originator of the call is a station other than the true originating station. This can lead to a display showing a phone number different from that of the telephone from which the call was placed.

<span class="mw-page-title-main">PhoneValet Message Center</span>

PhoneValet Message Center is a discontinued Mac-based multi-line computer-telephony software application from Parliant Corporation. The application provided computer-telephony functionality including voicemail, call recording, and the maintenance of a call history. The system is a combination of software and hardware. PhoneValet was awarded an Eddy award for 2006.

Telemarketing fraud is fraudulent selling conducted over the telephone. The term is also used for telephone fraud not involving selling.

Ringing is a telecommunication signal that causes a bell or other device to alert a telephone subscriber to an incoming telephone call. Historically, this entailed sending a high-voltage alternating current over the telephone line to a customer station which contained an electromagnetic bell. It is therefore also commonly referred to as power ringing, to distinguish it from another signal, audible ringing, or ringing tone, which is sent to the originating caller to indicate that the destination telephone is in fact ringing.

Call management is the process of designing and implementing inbound telephone call parameters, which govern the routing of these calls through a network. The process is most prominently utilized by corporations and the call centre industry and has its highest effectiveness when call logging software tools are used. Calls are routed according to the set up of calling features within the given system such as Call queues, IVR menus, Hunt groups and Recorded announcements. Call features provide a customised experience for the caller and maximize the efficiency of inbound call handling. Call management parameters can specify how calls are distributed according to an operator's skill level in relation to a call, the time and/or date of a call, the location of the caller or through automatic routing processes.

Phone hacking is the practice of exploring a mobile device, often using computer exploits to analyze everything from the lowest memory and CPU levels up to the highest file system and process levels. Modern open source tooling has become fairly sophisticated as to be able to "hook" into individual functions within any running app on an unlocked device and allow deep inspection and modification of its functions.

References

  1. Goldstein, Emmanuel (2008). The Best of 2600: A Hacker's Odyssey. John Wiley and Sons.
  2. 1 2 How It Works: Science and Technology . Marshall Cavendish. 2003. p. 761.