Infrared blaster

Last updated
IR blaster with standard 3.5 mm plug Tivo irblaster small.jpg
IR blaster with standard 3.5 mm plug
IR blaster attached to a cable TV tuner Ir blaster on cable box.jpg
IR blaster attached to a cable TV tuner

An infrared blaster (IR blaster) is a device that relays commands from a remote control to one or more devices that require infra-red remote control. For instance, it may also allow radio-frequency-based (RF) remotes (including those using Bluetooth) to control infra-red-based components. It may also allow one device to control another: A recording device, such as a DVR or VCR, might change the channel on an external tuner (such as a cable box or satellite television receiver). This way, the receiving device can automatically be set to the correct channel before the recording process starts. An IR blaster can be used to implement remote control of components from a mobile phone, tablet, or computer.

Contents

Description

The blaster itself is a combination of a receiving unit (which takes remote commands via wire or RF) and one or more infra-red-light emitters that relay those commands to the devices to be controlled. Often the receiver is a small unit that sits on or near those devices, which offers one or more jacks into which small IR emitter modules are plugged. Those emitters are then placed so that they can shine infra-red light on the IR sensors of the devices, either directly or bounced off a surface such as a cabinet door.

If the remote control to be used is also IR-based, there must be an IR sensor within its line of sight that will relay signals to the IR blaster over a wire or radio.

The output of an IR blaster (like that of any infra-red remote) is invisible to the human eye because its wavelength is beyond the range of visible light. The signal does not affect the human body and has no side effects for long exposure. [1]

Nevo REX-433 IR blaster with one IR emitter plugged in, for use with Nevo C3 remote via RF REX-433 for Revo C3.jpg
Nevo REX-433 IR blaster with one IR emitter plugged in, for use with Nevo C3 remote via RF

Applications

IR blasters are deployed to control infra-red-only devices from a remote control that wouldn't normally be able to do so, either because it is out of the line of sight or because it does not communicate with infra-red signals. An IR blaster can be used to control devices such as television sets, DVD players, DVRs, air conditioners, or almost any IR-controlled appliance. One common use of an IR blaster is to control components that are secured in an equipment closet or another room.

Today, many new devices use RF-based remote control or control over HDMI via Consumer Electronics Control (CEC). Over time, RF blasters will likely find the most use controlling older, "legacy" equipment. [2]

Related Research Articles

<span class="mw-page-title-main">Infrared</span> Form of electromagnetic radiation

Infrared is electromagnetic radiation (EMR) with wavelengths longer than those of visible light and shorter than radio waves. It is therefore invisible to the human eye. IR is generally understood to encompass wavelengths from around 1 millimeter (300 GHz) to the nominal red edge of the visible spectrum, around 700 nanometers (430 THz). IR is commonly divided between longer wavelength thermal infrared that is emitted from terrestrial sources and shorter wavelength near-infrared that is part of the solar spectrum. Longer IR wavelengths are sometimes included as part of the terahertz radiation range. Almost all black-body radiation from objects near room temperature is at infrared wavelengths. As a form of electromagnetic radiation, IR propagates energy and momentum, exerts radiation pressure, and has properties corresponding to both those of a wave and of a particle, the photon.

<span class="mw-page-title-main">X10 (industry standard)</span>

X10 is a protocol for communication among electronic devices used for home automation (domotics). It primarily uses power line wiring for signaling and control, where the signals involve brief radio frequency bursts representing digital information. A wireless radio-based protocol transport is also defined.

<span class="mw-page-title-main">Remote control</span> Device used to control other device remotely

In electronics, a remote control is an electronic device used to operate another device from a distance, usually wirelessly. In consumer electronics, a remote control can be used to operate devices such as a television set, DVD player or other home appliance. A remote control can allow operation of devices that are out of convenient reach for direct operation of controls. They function best when used from a short distance. This is primarily a convenience feature for the user. In some cases, remote controls allow a person to operate a device that they otherwise would not be able to reach, as when a garage door opener is triggered from outside.

Semi-automatic command to line of sight (SACLOS) is a method of missile command guidance. In SACLOS, the operator must continually point a sighting device at the target while the missile is in flight. Electronics in the sighting device and/or the missile then guide it to the target.

<span class="mw-page-title-main">Security alarm</span> System that detects unauthorised entry

A security alarm is a system designed to detect intrusions, such as unauthorized entry, into a building or other areas, such as a home or school. Security alarms protect against burglary (theft) or property damage, as well as against intruders. Examples include personal systems, neighborhood security alerts, car alarms, and prisons.

<span class="mw-page-title-main">Passive infrared sensor</span> Electronic sensor that measures infrared light

A passive infrared sensor is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors. PIR sensors are commonly used in security alarms and automatic lighting applications.

<span class="mw-page-title-main">Motion detector</span> Electrical device which utilizes a sensor to detect nearby motion

A motion detector is an electrical device that utilizes a sensor to detect nearby motion. Such a device is often integrated as a component of a system that automatically performs a task or alerts a user of motion in an area. They form a vital component of security, automated lighting control, home control, energy efficiency, and other useful systems.

A universal remote is a remote control that can be programmed to operate various brands of one or more types of consumer electronics devices. Low-end universal remotes can only control a set number of devices determined by their manufacturer, while mid- and high-end universal remotes allow the user to program in new control codes to the remote. Many remotes sold with various electronics include universal remote capabilities for other types of devices, which allows the remote to control other devices beyond the device it came with. For example, a VCR remote may be programmed to operate various brands of televisions.

A telecommand or telecontrol is a command sent to control a remote system or systems not directly connected to the place from which the telecommand is sent. The word is derived from tele = remote (Greek), and command = to entrust/order (Latin). Systems that need remote measurement and reporting of information of interest to the system designer or operator require the counterpart of telecommand, telemetry. The telecommand can be done in real time or not depending on the circumstances, as was the case of Marsokhod.

Remote infrared audible signage (RIAS) was developed by Smith-Kettlewell Eye Research Institute so that print-disabled people, such as those that are blind or have low-vision, or are illiterate, foreign, or visually impaired, would be able to access the same type of information available through textual print signs within the built environment.

Traffic signal preemption is a system that allows an operator to override the normal operation of traffic lights. The most common use of these systems manipulates traffic signals in the path of an emergency vehicle, halting conflicting traffic and allowing the emergency vehicle right-of-way, thereby reducing response times and enhance traffic safety. Signal preemption can also be used on tram, light-rail and bus rapid transit systems, to allow public transportation priority access through intersections, and by railroad systems at crossings to prevent collisions.

<span class="mw-page-title-main">Video sender</span> Device for transmitting audio and video signals wirelessly

A video sender is a device for transmitting domestic audio and video signals wirelessly from one location to another. It is most commonly used for sending the output of a source device, such as a satellite television decoder, to a television in another part of a property and provides an alternative to cable installations.

<span class="mw-page-title-main">Photoelectric sensor</span>

A photoelectric sensor is a device used to determine the distance, absence, or presence of an object by using a light transmitter, often infrared, and a photoelectric receiver. They are largely used in industrial manufacturing. There are three different useful types: opposed (through-beam), retro-reflective, and proximity-sensing (diffused).

Consumer IR, consumer infrared, or CIR is a class of devices employing the infrared portion of the electromagnetic spectrum for wireless communications. CIR ports are commonly found in consumer electronics devices such as television remote controls, PDAs, laptops, and computers.

Astrionics is the science and technology of the development and application of electronic systems, subsystems, and components used in spacecraft. The electronic systems on-board a spacecraft are embedded systems and include attitude determination and control, communications, command and telemetry, and computer systems. Sensors refers to the electronic components on board a spacecraft.

Infrared lamps are electrical devices which emit infrared radiation. Infrared lamps are commonly used in radiant heating for industrial processes and building heating. Infrared LEDs are used for communication over optical fibers and in remote control devices. Infrared lamps are also used for some night vision devices where visible light would be objectionable. Infrared lamp sources are used in certain scientific and industrial instrument for chemical analysis of liquids and gases; for example, the pollutant sulfur dioxide in air can be measured using its infrared absorption characteristics.

<span class="mw-page-title-main">RF module</span>

An RF module is a (usually) small electronic device used to transmit and/or receive radio signals between two devices. In an embedded system it is often desirable to communicate with another device wirelessly. This wireless communication may be accomplished through optical communication or through radio-frequency (RF) communication. For many applications, the medium of choice is RF since it does not require line of sight. RF communications incorporate a transmitter and a receiver. They are of various types and ranges. Some can transmit up to 500 feet. RF modules are typically fabricated using RF CMOS technology.

This is a list of infrared topics.

<span class="mw-page-title-main">Counter-IED equipment</span>

Counter-IED equipment are created primarily for military and law enforcement. They are used for standoff detection of explosives and explosive precursor components and defeating the Improvised Explosive Devices (IEDs) devices themselves as part of a broader counter-terrorism, counter-insurgency, or law enforcement effort.

<span class="mw-page-title-main">Logitech Harmony</span>

Logitech Harmony is a line of remote controls and home automation products produced by Logitech. The line includes universal remote products designed for controlling the components of home theater systems and other devices that can be controlled via infrared, as well as newer smart home hub products that can be used to additionally control supported Internet of things (IoT) and Smart home products, and allow the use of mobile apps to control devices. On April 10, 2021, Logitech announced that they would discontinue Harmony Remote manufacturing.

References

  1. "Infrared (IR) Blaster, basics, working, applications, advantages". circuitstoday.com. April 6, 2011.
  2. "Remote controls get pointless as radio frequency gains popularity". ComputerWorld. IDG Communications.