Ithaca Auto & Burglar

Last updated
Ithaca Auto & Burglar Gun
Ithaca-auto-burglar.jpg
Type Double barrel shotgun
Place of origin United States
Service history
Used by Bank guards, police, messengers, home defense
Production history
Manufacturer Ithaca Gun Company
Produced1922 - 1933
No. builtapprox. 4,000
Specifications
Mass2 kg (4.5 lbs)
Length406mm (16 inches)
Barrel  length317mm (12.5 inches) or 257mm (10.1 inches)

Caliber 20 gauge, 28 gauge
Action Break-action

The Auto & Burglar Gun was a US-made factory-built handgun that was commercially manufactured by configuring a standard double-barrel shotgun with a pistol grip, at first engraving and later stamping "Auto & Burglar Gun" on each side of the frame, and shortening the barrels to about 10" to 12.2" in length. A holster with a flap and a snap was available for purchase from Ithaca. It was outsourced to a leather company and was embossed with "Auto & Burglar" on it. They are also very rare and are infrequently seen for sale in any condition.

Contents

Variants

Model A

The Auto & Burglar Gun was manufactured in two variations. Approximately 2,500 of the original variants were manufactured from 1921 to 1925 using Ithaca's standard 20 gauge Flues model shotgun, and designed to fire 2½" shells. Sometimes referred to as "Model A", its barrels were about 10" in length. These guns should only be fired with 2½" shells; firing longer shells will "bulge" the barrels.

Flues model

The Flues model was designed with a "saw handle" style grip featuring a large spur at the top to absorb recoil.

New Improved Double model

Ithaca redesigned the gun in 1925 using its New Improved Double (NID) model shotgun, which fires 2¾" shells; the barrels were lengthened to about 12.2"; and the grip was redesigned without the spur. Sometimes referred to as "Model B," about 1,500 were manufactured. Model A and Model B are not formal factory designations. [1]

Demise

Ithaca stopped manufacturing the Auto & Burglar Gun when it became subject to registration and a $200 transfer tax under the National Firearms Act (NFA) of 1934 (the transfer tax was reduced to $5 in 1960). Relatively few Auto & Burglar Guns were manufactured, and they are highly prized today as collector's items. Approximately 20 Auto & Burglar Guns were specially manufactured, representing .410 bore, 28 gauge, and 16 gauge, only 11 of which have been reliably documented, and all these guns are extremely rare. [2] The earliest known Ithaca Auto & Burglar Gun was manufactured about 1921, possibly as a prototype: it bears serial number 354442, is in 28 gauge with 12" barrels, "Auto & Burglar Gun" is hand-engraved on each side, and the gun is listed separately in the Firearms Curios or Relics List published by the Bureau of Alcohol, Tobacco, Firearms and Explosives.

While it is sometimes incorrectly identified as a "sawed-off shotgun," the Ithaca Auto & Burglar Gun is a smooth bore pistol which since 1934 has been classified as an " Any Other Weapon" (AOW) [3] under the NFA, and it must be registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). Auto & Burglar Guns that are not currently registered are contraband, and cannot be legally possessed or registered. The penalties for illegal possession include up to a $250,000 fine and 10 years in prison.

The "auto" in its name referred to "automobile": it was intended as a self-defense weapon that could easily be carried in an automobile, but it was taken up by bank guards, police departments, watchmen, and messengers.

Modern Production

The Italian gunmaker Davide Pedersoli has recently begun marketing a replica of the Auto & Burglar pistol with rifled barrels chambered to accept either .45 Colt or .410 shotshells. The rifled barrels, and the fact it is built as a pistol from the start, keeps it clear of the National Firearms Act.

See also

Related Research Articles

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and used by an individual. The term is legally defined further in different countries.

<span class="mw-page-title-main">Shotgun</span> Firearm intended for firing a junta of small to medium-sized pellets

A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs are also available.

<span class="mw-page-title-main">National Firearms Act</span> 1934 US law regulating firearms including machine guns

The National Firearms Act (NFA), 73rd Congress, Sess. 2, ch. 757, 48 Stat. 1236 was enacted on June 26, 1934, and currently codified and amended as I.R.C. ch. 53. The law is an Act of Congress in the United States that, in general, imposes an excise tax on the manufacture and transfer of certain firearms and mandates the registration of those firearms. The NFA is also referred to as Title II of the federal firearms laws, with the Gun Control Act of 1968 ("GCA") as Title I.

<span class="mw-page-title-main">Sawed-off shotgun</span> Type of shotgun

A sawed-off shotgun is a type of shotgun with a shorter gun barrel—typically under 18 inches (46 cm)—and often a pistol grip instead of a longer shoulder stock. Despite the colloquial term, barrels do not, strictly speaking, have to be shortened with a saw. Barrels can be manufactured at shorter lengths as an alternative to traditional, longer barrels. This makes them easier to transport and conceal due to their smaller profile and lighter weight. The design also makes the weapon more portable when maneuvering in confined spaces and for that reason law enforcement and military personnel find it useful in close-quarters combat scenarios. As a result of the shorter barrel length, any shotgun with a tubular magazine will have a reduction in its magazine capacity.

<span class="mw-page-title-main">Mossberg 500</span> Series of pump-action shotguns

The Mossberg 500 (M500) is a series of pump action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, 11,000,000 M500s had been produced, making it the most-produced shotgun of all time.

In the United States, a destructive device is a type of firearm or explosive device regulated by the National Firearms Act of 1934, revised by the Omnibus Crime Control and Safe Streets Act of 1968 and Gun Control Act of 1968.

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

<span class="mw-page-title-main">Cobray Company</span> American small arms developer and manufacturer

The Cobray Company was an American developer and manufacturer of submachine guns, automatic carbines, handguns, shotguns, and non-lethal 37 mm launchers. These were manufactured by SWD. In the 1970s and 1980s, Cobray was a counter terrorist training center in addition to being an arms maker under the leadership of Mitch WerBell.

<span class="mw-page-title-main">LeMat Revolver</span> Grapeshot revolver/service pistol

The LeMat revolver was a .42 or .36 caliber cap & ball black powder revolver invented by Jean Alexandre LeMat of France, which featured an unusual secondary 16 to 20 gauge smooth-bore barrel capable of firing buckshot. It saw service with the armed forces of the Confederate States of America during the American Civil War of 1861–1865 and the Army of the Government of National Defense during the Franco-Prussian War.

Thompson/Center Arms was an American firearms company based in Springfield, Massachusetts. The company was best known for its line of interchangeable-barrel, single-shot pistols and rifles. Thompson/Center also manufactured muzzle-loading rifles and was credited with creating the resurgence of their use in the 1970s.

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

Harrington & Richardson is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Break action</span> Type of firearm action

Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.

<span class="mw-page-title-main">Antique firearms</span> Firearms older than 20th century

An antique firearm is a term used to describe a firearm that was designed and manufactured prior to the beginning of the 20th century. Although the exact definition of what constitutes an "antique firearm" varies between countries, the advent of smokeless powder or the start of the Boer War are often used as cut-off dates. Antique firearms are usually collected because of their historical interest and/or their monetary value.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

The following are terms related to firearms and ammunition topics.

<span class="mw-page-title-main">Title II weapons</span> Class of weapons under the National Firearms Act

Title II weapons, or NFA firearms, are designations of certain weapons under the United States National Firearms Act (NFA).

<span class="mw-page-title-main">Taurus Judge</span> Revolver

The Taurus Judge is a five shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.

The Manville gun was a stockless, semi-automatic, revolver type gun, introduced in 1935 by Charles J. Manville. The Manville Gun was a large weapon, with a heavy cylinder being rotated for each shot by a clockwork-type spring. The spring was wound manually during the reloading.

The Marble Game Getter is a light, double-barrel (over-under), combination gun manufactured by the Marble's Arms & Manufacturing Company in Gladstone, Michigan. The firearm features a skeleton folding stock and a rifle barrel over a smooth-bore shotgun barrel. A manually pivoted hammer striker is used to select the upper or lower barrel. Three generations of the system were/are produced—First Generation, Second Generation and the Third Generation currently manufactured by Marble Arms.

Chiappa Firearms, Armi Sport di Chiappa, is an Italian firearms manufacturing company based in Brescia. It was founded in 1958 by Ezechiele Chiappa as Armi Sport. Total unit production is around 60,000 per year. Its U.S. headquarters are in Dayton, Ohio.

References

  1. "The Ithaca Auto and Burglar Gun," in The World's Fighting Shotguns, by Thomas F. Swearengen. Vol. IV. Hong Kong: Chesea, Ltd., 1978, pages 80-84.
  2. 2004 Standard Catalog of Firearms: The Collector's Price & Reference Guide, by Ned Schwing. 14th edition. Iola, WI: Krause Publications, pages 605-607.
  3. "Any Other Weapon," as defined in 26 U.S.C., § 5845(e), means any weapon or device capable of being concealed on the person from which a shot can be discharged through the energy of an explosive, a pistol or revolver having a barrel with a smooth bore designed or redesigned to fire a fixed shotgun shell, weapons with combination shotgun and rifle barrels 12 inches or more, less than 18 inches in length, from which only a single discharge can be made from either barrel without manual reloading, and shall include any such weapon which may be readily restored to fire. Such term shall not include a pistol or revolver having a rifled bore, or rifled bores, or weapons designed, made, or intended to be fired from the shoulder and not capable of firing fixed ammunition.