Kinor

Last updated
Kinor
Kinor 16 CX-2M.jpg
Kinor 16 CX-2M with a 12-120mm lens
Variant models16SP, 16SX-1M, 16SX-2M
ManufacturerKMZ
Introduced1958 [1]
Gauge 16mm
Movementmotor
Lens mount proprietary, various
Shutter mirror shutter
Magazines rear mounted, 30m and 120m
Magazine loadingfixed loop, geared
Film coresstandard cores, removable platter allows use of daylight reels in 30m magazine

Kinor is the name of a line of movie cameras produced in the USSR. All cameras under the Kinor name were intended for professional use and were equipped with a through-the-lens viewfinder with a mirror shutter, but were otherwise unrelated in their technical design as they were created by a variety of different organizations.[ citation needed ]

Contents

16SP/SP-M
ManufacturerKMZ
Introduced1958
Speed 8-64 FPS, forward and reverse
MotorDC, optional crystal-sync motor
Lens mount 16SP aka Krasnogorsk
Shutter reflex mirror, 30-170deg
Viewfinder through lens, fixed
Magazines rear mounted, 30m and 120m

Kinor 16SP

The Kinor 16SP was the first camera in the series. It is essentially a copy of the Arriflex 16ST, with a three-lens turret and a fixed straight viewfinder tube. Unlike the 16ST, however, the 16SP uses interchangeable magazines by default (where the Arri camera requires modification). Electric drive, removable electric motor, 6-8V 8A, powered by alkaline batteries type KN-10. Speeds 8-64 fps, forward and reverse. Meter and frame counters in the camera. OKS type lenses: F=10;15;25;50;75mm, mount: Krasnogorsk mount. Charging with cassettes of 30 meters (4 pcs), 60 meters (3 pcs), film in rolls on standard cores. The shutter is mirrored, with a variable angle of 30-170 degrees. Includes compendium shade and set of filters. For sound-sync filming, a blimp and a synchronous electric drive were produced. Disadvantage: the cassettes do not have a meter counter.

16CX-M
ManufacturerMoskinap
Introduced1965
Movementsingle pulldown claw with registration pin
Speed 10-EPSS: 25 FPS

11-EPSS: 24FPS 28-EPSS: 8-64 FPS

29-EPSS: 25 FPS
Motor10-, 11-EPSS: AC synchronous 28-, 29-EPSS: 12V DC crystal sync
Lens mount OST-19-144, three-port turret
Shutter reflex mirror, 70-170deg
Viewfinder through lens, rotatable and extensible
Magazines rear mounted, 30m and 120m
16CX-2M
ManufacturerMoskinap
Introduced1965
Movementsingle pulldown claw with registration pin
Speed 10-EPSS: 25 FPS

11-EPSS: 24FPS 28-EPSS: 8-64 FPS

29-EPSS: 25 FPS
Motor10-, 11-EPSS: AC synchronous 28-, 29-EPSS: 12V DC crystal sync
Lens mount OST-19-144, single port
Shutter reflex mirror, fixed
Viewfinder through lens, rotatable and extensible
Magazines rear mounted, 30m and 120m

Kinor 16 CX series Cine Camera

The Kinor prototype was created in 1965 by the MKBK, or Moskinap, manual narrow-film apparatus 16СХ of the original design. [2] However, large-scale production was established only ten years after the modernization. Two versions were produced: the turret "Kinor" 16СХ-М with a revolving head for three interchangeable lenses, and 16СХ-2М, designed for one interchangeable lens. The cameras were intended for synchronous filming of television plots, since video cameras for television journalism did not yet exist in the USSR . Unlike the turret model, which was equipped with an shutter with an adjustable opening angle, the shutter of the 16CX-2M model was non-adjustable, which simplified the design and made it more reliable. [3] The last model was equipped with a tenfold professional 16OPF1-2M-01 zoom lens with a focal length range of 12–120 mm and a wide-angle lens of 10 mm. The other configuration included a 16OPF12-1s varifocal lens and a 0.75 × wide-angle attachment . The device made it possible to use the majority of cinematographic lenses in a standard frame, including those from old-style Krasnogorsk cameras with a bayonet mount . On the basis of the 16СХ family, a tripod-shoulder synchronous camera 2СР was developed with a built-in device for recording an audio on the magnetic track of a film.

Kinor 16 CX-2M film magazine platter.jpg
Kinor 16 CX-2M film magazine.jpg
Kinor 16 CX-2M .jpg

Brief Details

The 16mm Kinor 16CX-M has a turret-type lens mounting and a variable shutter. The 2M and the rare 3M models are supplied with a 10-100 zoom lens, which has front- and rear-mountable filters. The usual kit consists of four magazines, three 100-foot, and one 400-foot. Synchronized sound is achieved using a sync-pulse known as a pilot tone, and the motor generates an accurate 25 frames per second to attain this. Variable frame rates require a relatively cheap modification form third-party developers, or the factory-produced variable drive unit. This is very quickly and simply replaced. It is common to see this type of modification coupled with the addition of true crystal-sync.

The cameras’ use in the West is gaining popularity[ citation needed ] as filmmakers grow accustomed to Russian manufacturing quality. Compared with the Krasnogorsk series of Russian cameras, the build quality is of a higher standard,[ citation needed ] although these too are well-designed units. Their price compared with the benchmark Arri series film cameras is drastically cheaper; this is partly the reason new filmmakers are finding themselves the owners[ citation needed ] of these very practical film cameras.

The 35-millimeter Kinors are self-blimped and have been used to make films worldwide.

There is a wide range of LOMO lenses produced for the Kinor 16.

Prime lenses are

Zoom lenses are

and a wide angle adapter which attaches to both lenses which lends a 7.5–75 mm range to the 16 OPF 12-1 and a 9–90 mm range to the 16 OPF 1-2M-01.

Technical Details

The 16SX-2M apparatus was equipped with a one-sided single-tooth grab with a single-tooth counter- grab and a lower-mounted mirror shutter with a constant opening angle. [3] The design made it possible to shoot on film with both one-sided and double-sided perforation . Quick-change magazine type cassettes with a capacity of 30 and 120 meters were designed for film rolls wound on standard cores 16 × 50. [4] Daylight 100 ft spools could be placed in the magazine by removing the "platters", as per the image to the right. It seems commonly recommend not to use metal spools as if they rub against the inside of the magazine, audio recording might be difficult.

The view finder with a magnification of 9.5 × , equipped with a diopter adjustment, could rotate 360 ° in one plane without compensating for the image rotation. [5] The rotation of the magnifier provided comfortable sighting at low or excessively high positions of the apparatus, but at the same time the observed image was rotated at an angle corresponding to the rotation of the magnifier. In addition to turning, the magnifier could be pulled out of the housing for adjustment to the operator's left eye. Focusing was carried out according to the image on frosted glass or distance scales on the lenses.

The design of the drive is removable, which made it possible to use various types. The main DC electric drive 29EPSS was powered by a block of 8 SCS-5 batteries, carried on the operator's shoulder, and was designed for 25 frames per second. [6] Additionally, 28EPSS drives were produced with a wider range of 8–64 frames per second, and AC (power point) powered drives 10EPS and 11EPS, designed for 24 and 25 frames per second, respectively. [3] All drives are equipped with a "pilot-tone" , which provided synchronization to a recording device to record synchronous audio. [7] "Kinor" 16СХ-2М had a low noise level of the mechanism 42 dB and was suitable for synchronous shooting. [8] In modern usage, a 12 volt motorcycle battery would commonly supply ample charge to run a Kinor camera. Higher fps speeds may require a higher watt battery output.

With the advent of portable video cameras, which were more convenient than filming devices in television production, the 16 mm Kinor series cameras were replaced by them. Currently, there are improved versions of these devices, equipped with TVs, PL mount and digitally controlled electric drives. There are also devices with an enlarged frame window, adapted to the " Super-16 " format. [3]

Related Research Articles

<span class="mw-page-title-main">Rangefinder camera</span> Camera fitted with a rangefinder

A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus.

Robot was a German imaging company known originally for clockwork cameras, later producing surveillance (Traffipax) and bank security cameras. Originally created in 1934 as a brand of Otto Berning, it became part of the Jenoptik group of optical companies in 1999, and specializes in traffic surveillance today.

<span class="mw-page-title-main">Zorki</span>

Zorki is the name of a series of 35mm rangefinder cameras manufactured in the Soviet Union between 1948 and 1978.

<span class="mw-page-title-main">Konvas</span> 35mm motion-picture cameras

Konvas is the general name of portable 35mm motion-picture cameras that was manufactured in the USSR by KMZ, known as ZENIT camera makers, and later on, MOSKINAP (MOSKOVSKIY ZAVOD KINOAPPARATURIY – Moscow Works of Cinema Equipment, at one time in the late 80's had over 2,000 employees; now OAO "MOSKINAP", and for a short period at the same factory after the collapse of the Soviet Union. The factory was manufacturing Laser soundheads, and 35mm sound projectors originally were made by Odessa PO KINAP some time ago. The camera line is no longer made, although many working models are still circulating at reasonable prices worldwide. The name "Konvas" is a portmanteau that comes from the first three letters of the last and first name of the camera's designer, KONSTANTINOV VASILY.

<span class="mw-page-title-main">Lens mount</span> Interface between a camera body and lens

A lens mount is an interface – mechanical and often also electrical – between a photographic camera body and a lens. It is a feature of camera systems where the body allows interchangeable lenses, most usually the rangefinder camera, single lens reflex type, single lens mirrorless type or any movie camera of 16 mm or higher gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C-mount or T-mount elements.

<span class="mw-page-title-main">Schneider Kreuznach</span> German company

Jos. Schneider Optische Werke GmbH is a manufacturer of industrial and photographic optics. The company was founded on 18 January 1913 by Joseph Schneider as Optische Anstalt Jos. Schneider & Co. at Bad Kreuznach in Germany. The company changed its name to Jos. Schneider & Co., Optische Werke, Kreuznach in 1922, and to the current Jos. Schneider Optische Werke GmbH in 1998.

<span class="mw-page-title-main">Nikon FE2</span> Camera model

The Nikon FE2 is a 35 mm single lens reflex (SLR) camera manufactured by Nippon Kogaku K. K. in Japan from 1983 to 1987. The FE2 uses a Nikon-designed vertical-travel focal-plane shutter with a speed range of 8 to 1/4000th second, plus Bulb and flash X-sync of 1/250th second. It was available in two colors: black with chrome trim and all black. The introductory US list price for the chrome body only was $446. Note that SLRs usually sold for 30 to 40 percent below list price.

<span class="mw-page-title-main">Guide number</span>

When setting photoflash exposures, the guide number (GN) of photoflash devices is a measure photographers can use to calculate either the required f‑stop for any given flash-to-subject distance, or the required distance for any given f‑stop. To solve for either of these two variables, one merely divides a device's guide number by the other.

<span class="mw-page-title-main">Canon AE-1</span> 35 mm film single-lens reflex camera

The Canon AE-1 is a 35 mm single-lens reflex (SLR) film camera for use with interchangeable lenses. It was manufactured by Canon Camera K. K. in Japan from April 1976 to 1984. It uses an electronically controlled, electromagnet horizontal cloth focal plane shutter, with a speed range of 2 to 1/1000 second plus Bulb and flash X-sync of 1/60 second. The camera body is 87 mm tall, 141 mm wide, and 48 mm deep; it weighs 590 g. Most are black with chrome trim, but some are all black.

<span class="mw-page-title-main">Canon F-1</span> 35mm single-lens reflex camera model

The Canon F-1 is a 35 mm single-lens reflex camera produced by Canon of Japan from March 1971 until the end of 1981, at which point it had been superseded by the New F-1 launched earlier that year. The Canon FD lens mount was introduced along with the F-1, but the previous Canon FL-mount lenses and older R- series lenses were also compatible with the camera with some limitations. The Canon F-1 was marketed as a competitor to the Nikon F and Nikon F2 single lens reflex cameras by Nikon.

<span class="mw-page-title-main">Nikon F2</span> Camera model

The Nikon F2 is a professional-level, interchangeable lens, 35 mm film, single-lens reflex (SLR) camera. It was manufactured by the Japanese optics company Nippon Kogaku K. K. in Japan from September 1971 to 1980. It used a horizontal-travel focal plane shutter with titanium shutter curtains and a speed range of 1 to 1/2000 second plus Bulb and Time, and flash X-sync of 1/80 second. It had dimensions of 98 mm height, 152.5 mm width, 65 mm depth and 730 g weight. It was available in two colors: black with chrome trim and all black. The F2 was adopted by both casual photographers and professional photographers, the latter of those especially photojournalists covering the later half of the Vietnam War.

<span class="mw-page-title-main">35 mm Bessa</span>

The Bessa family of cameras was manufactured in Japan by Cosina as a revival of the Voigtländer brand name between 1999 and 2015.

<span class="mw-page-title-main">Minolta CLE</span> 35 mm rangefinder camera

The Minolta CLE is a TTL-metering manual & automatic exposure aperture-priority 35 mm rangefinder camera using Leica M lenses, introduced by Minolta in 1980.

<span class="mw-page-title-main">Auricon</span>

Auricon cameras were 16 mm film Single System sound-on-film motion picture cameras manufactured in the 1940s through the early 1980s. Auricon cameras are notable because they record sound directly onto an optical or magnetic track on the same film as the image is photographed on, thus eliminating the need for a separate audio recorder. The camera preceded ENG video cameras as the main AV tool of television news gathering due to its portability–and relatively quick production turn-around–where processed negative film image could be broadcast by electronically creating a positive image. Additionally, the Auricon found studio use as a 'kinescope' camera of live video off of a TV screen, but only on early pre-NTSC line-locked monochrome systems.

<span class="mw-page-title-main">Kodak Retina Reflex</span> SLR photo camera

The Kodak Retina Reflex is a discontinued series of four single-lens reflex cameras made by Kodak in Germany between 1957 and 1974, as part of the Kodak Retina line of 35mm film cameras.

<span class="mw-page-title-main">Mecaflex</span> 35mm SLR camera

The Mecaflex is a 35mm SLR camera for 50 exposures of 24 × 24 mm. It was presented at the photokina in Cologne in 1951, and launched commercially about two years later. The design is by Heinz Kilfitt, who is also known for designing the original Robot camera and the Kowa Six.

<span class="mw-page-title-main">Fuji GX680</span> Camera model

The Fuji GX680 is a series of single lens reflex system cameras for medium format film produced by Fujifilm with interchangeable camera lenses and interchangeable film holders for the unusual film format 6×8 cm on 120 and 220 roll film. The distinguishing feature of the Fuji GX680 is the articulating front standard, which runs on a rail connecting lens and camera body by a bellows; the interchangeable lens is permanently mounted to a lens board.

<span class="mw-page-title-main">Narciss</span>

The Narciss is an all-metal 16 mm subminiature single lens reflex camera made by Russian optic firm Krasnogorsky Mekhanichesky Zavod (KMZ) Narciss between 1961 and 1965. It is the first subminiature SLR. It took 25 14×21 mm frames using unperforated specially spooled 16 mm film in a Narciss cassette. Compact design with interchangeable lenses and interchangeable pentaprism finders. The Narciss camera was initially designed for medical use, it included a Narciss with ordinary pentaprism finder and a second magnifier pentaprism finder for medical use; there was also a microscope adapter

<span class="mw-page-title-main">Kodak Cine Special 16mm Cameras</span>

The Kodak Cine Special 16mm Cameras (CKS) are a family of precision, versatile, spring-wound 16mm silent movie cameras produced by Eastman Kodak from the 1930s to the 1960s, and intended for advanced consumers and industry professionals. While its rectangular format was typical of earlier Kodak 16 mm cameras, the CKS 'box' was formed by two joined sections: the spring motor half with the user controls, winding cranks, and gear work to the shutter. The other half was a film magazine which docked to the motor. This allowed the cinematographer to pre-load multiple magazines of film for quick interchange of film.

<span class="mw-page-title-main">Mamiya 645</span> Series of film and digital cameras and lenses

The Mamiya 645 camera systems are a series of medium format film and digital cameras and lenses manufactured by Mamiya and its successors. They are called "645" because they use the nominal 6 cm x 4.5 cm film size from 120 roll film. They came in three major generations: first-generation manual-focus film cameras, second-generation manual-focus film cameras, and autofocus film/digital cameras.

References

  1. "Сайт кино и видеотехники ХХ века - 16-СП/16-СП-М".
  2. 'V.V. Perepichai, V.F. Gordeev, O. N. Raev. Special equipment for filming processes  (rus.)  // "World of cinema technology": magazine. - 2008. - No. 10 . - S. 30 . - ISSN 1991-3400
  3. 1 2 3 4 Website of cinema and video equipment of the XX century
  4. Gordiychuk, 1979, p. 122
  5. Gordiychuk, 1979, p. 122
  6. Whitepaper, 1975, p. 27
  7. Gordiychuk, 1979, p. 122
  8. Salomatin, 1990, p. 21

Sources