LabelTag

Last updated

LabelTag can create a circular label on the data side of any DVD+R, DVD-R, or CD-R [1] disc containing basic information visible to the eye. When burning the data, the label is printed directly behind that data in the same recording session, and on normal recording speed on the same recording layer side. LabelTag works on any disc and does not require a special disc like LightScribe. As of June 2011, LabelTag was an exclusive technology of Lite-On for its DVD writer drives.[ citation needed ]

Contents

An older alternative disc labeling technique was DiscT@2. To record the label on the opposite or back side of the disc by the drive itself LightScribe and LabelFlash are current standards. Besides that, printing using an inkjet printer is currently widely used.

System description

The PC host application controls the data location of the regular user data, including the structure of the file system. In the host application the user label input is transformed into a bit-map representation. The host sends print commands with the pixel information of the image to the drive. The drive interface, records the regular data, including lead in, session intros and closures, and finally lead out. The drive Interface (IF) part takes care of the interpretation of the pixel information and location of the image on the disc. The drive Servo part finally records the pixel information on the correct location including the encoded line numbering. The drive Servo part controls the record power, motor frequency, pixel frequency and channel bit frequency.

Overview of LabelTag system functions LABELTAG system overview.jpg
Overview of LabelTag system functions
Overview of System Parameters
ItemDescription
Disc typeDVD+R SL and DVD-R SL
Disc formatMulti session
Image typesBlack and White
Pixel height132 tracks, 98 μm
Number of pixels3528 pixels per 360° turn
File systemsISO9660 or UDF for data DVD-data disc, UDF bridge for DVD-video discs

Location and time of image recording

The label can be added or appended to the disc at any time if disc space is available. The disc status has to be "appendable" prior to the image recording. The label is recorded adjacent to the last recorded user data. It is up to the user to finalize the disc after the label is added. In case the disc remains "appendable" more user data or more labels can be added. The first section of the disc (26 mm) is used for all drives to do the start-up calibrations. Therefore, no label can be recorded at the inner diameter of the disc. If there is a label in this area, the risk of poor performance is big.

Space usage

If you add a label on the data side of the disc, then this space is no longer available for data. The amount of space it takes depends on the size (width) of the label and the location of the label on the disc. The wider the label and the more it is located on the outside of the disc, the more space it takes. In other words: the bigger the label, the more disc surface is occupied and thus the more data-space you sacrifice. For example: a 5 mm label at the inside requires 10% capacity, and at the outside of the disc about 20% of the disc capacity.

Image visibility and recording process

For LabelTag the Eight-to-Fourteen Modulation (EFM+) channel code properties are modulated to create the visual label. In the EFM+ code table, the user data bytes are transformed into specific sequences of pits and lands, ranging from 3T up to 14T channel bits. To create a pit, a high power pulse from the laser is focused into a small spot on the dye layer. This heats the dye material such that an irreversible transformation of the dye material creates the pit. To create a land, the laser is turned to a low power, such that no transformation in the dye material occurs. In general for DVD+/-R media, the recorded marks have a different visual reflection. Therefore, by recording long sequences of reflective marks or reflective spaces one can create the visible label. To maintain maximum backwards compatibility, LabelTag uses a majority of long marks in the recording layer for a dark pixel, while the bright image pixels are created by a majority of long spaces in the recording layer. Only in that case a sufficient large Differential Phase Detection (DPD) tracking signal is generated. This DPD signal is required for DVD players to jump over the Label area to reach beyond the label appended user data.

Scope traces of eyepatterns on DVD+R user data EFM+ (left), BRIGHT pattern (middle), DARK pattern (right). LABELTAG eyepatterns 2.jpg
Scope traces of eyepatterns on DVD+R user data EFM+ (left), BRIGHT pattern (middle), DARK pattern (right).

During the recording the normal servo processes are used. The beam follows the tracks (grooves). The spot is in focus on the recording layer. Each image line is recorded by repeating the same recording pattern several tracks. In case of DVD with a track pitch of 740 nm, a 100μm image line width is obtained by repeating the pattern 132 consecutive tracks. Because every label pixel is constructed by 132 consecutive tracks, higher image sharpness and contrast is obtained compared to DiscT@2. Each visible pixel is about 40μm × 100μm (w × l) at the inner radius up to 100μm × 100μm (w × l) at the outer radius. This leads to a picture quality above 250DPI.

As the label and the user data are recorded in the same dye layer of the DVD+/-R media, and label pattern uses run-lengths within the EFM+ range, the same (castle) write pulse form is used as for the regular user data recordings. To enhance the contrast a higher recording power is optional.

Backwards compatibility and logical format

File System and Physical Format pointers for the LabelTag Image session. LabelTag session format.jpg
File System and Physical Format pointers for the LabelTag Image session.

After the visual tag is written to the disc, this disc remains accessible, readable and appendable for any legacy drives. For that, the label is recorded within the user data zone of the disc in its own Image Session. Then any regular DVD drive capable to read multi session DVDs is able to access the user data zone beyond the label. Very old DVD drives, supporting only single session DVD, might only retrieve data stored in the first session.

Access of the LabelTag area itself is prevented by two protection mechanisms:

Besides, directly around the label a buffer zone is present that enhances the seek performance for the adjacent user data zones. Finally, a sufficient DPD tracking signal is required at the image location. For that reason, the bright and dark pixels are created by recording marks and spaces within the EFM+-runlength range.

Multiple labels and data sessions

Multi session and tagging explained. Multi session explained further2.jpg
Multi session and tagging explained.

The LabelTag format is flexible. It allows as many labels on a disc as space is available. A multisession discs allows burning more data and labels at a later stage. Once the disc is finalized, no more data or labels can be added. But, the more labels you add, the less space you have left for data.

LabelTag application

To record a label on the disc, the application sends pixel information to the drive with a SCSI command.

The application

WRITE12 SCSI commands

TAGWRITE command TagWrite Command2.jpg
TAGWRITE command
Specification of the TagWrite data format TAGWRITE DATA FORMAT2.jpg
Specification of the TagWrite data format

For LabelTag no new commands are introduced; the changes are made to the already existing commands. Pixel data describing the pixels for one or more image lines is sent to the drive via the WRITE12 SCSI Write Commands. The line width and number of pixels in each line are set in the LabelTag SCSI mode pages. The WRITE12 command is called TAGWRITE command to emphasize the dedicated LabelTag SCSI mode pages settings. After this command the image data is located in the drive buffer. The drive starts writing after the buffer is full or a SYNCHRONIZE CACHE command is sent.

Image data format

The image data is formatted by the application as bitmap into bright pixels and dark pixels. The bright pixel corresponds to bitmap 0 and the dark pixel to bitmap 1. Therefore, LabelTag allows both text and logos to be printed.

In the LabelTag mode page the following properties are exchanged:

Example of text converted into pixel data. LABELTAG text converted into pixel data2.jpg
Example of text converted into pixel data.

Process-flow

The application confirms if the drive is capable of making visual images using the LabelTag technology by sending the GETCONFIGURATION command. In case the LabelTag feature is current, a supported disc with an appendable session is inserted into the drive. The printing of the Label can begin.

First the FS-Zone1 data is recorded on the next writable address. To write the image following the FS-Zone1, the mode bit is set in the LabelTag mode page. The drive is now in LabelTag mode. The data in TAGWRITE commands contains the Label pixel data. The label starts on the Next Writable Address of the inserted disc. The application sends a SYNCHRONIZE CACHE to the drive to let the drive start the image burning. The application unsets the mode bit in the LabelTag mode page to let the drive go back in data write mode. Before the drive can add the FS-Zone2, the application has to inquire the Next Writable Address from the drive to know where the end address is of the Image Window. The application finishes the LabelTag writing by closing the Image Session.

LabelTag application process flow. LABELTAG process flow.jpg
LabelTag application process flow.

See also

Related Research Articles

<span class="mw-page-title-main">Compact disc</span> Digital optical disc data storage format

The compact disc (CD) is a digital optical disc data storage format that was co-developed by Philips and Sony to store and play digital audio recordings. In August 1982, the first compact disc was manufactured. It was then released in October 1982 in Japan and branded as Digital Audio Compact Disc.

<span class="mw-page-title-main">CD-R</span> Recordable optical disc technology

CD-R is a digital optical disc storage format. A CD-R disc is a compact disc that can be written once and read arbitrarily many times.

<span class="mw-page-title-main">Optical disc</span> Flat, usually circular disc that encodes binary data

An optical disc is a flat, usually disc-shaped object that stores information in the form of physical variations on its surface that can be read with the aid of a beam of light. Optical discs can be reflective, where the light source and detector are on the same side of the disc, or transmissive, where light shines through the disc to be detected on the other side.

<span class="mw-page-title-main">Optical disc drive</span> Type of computer disk storage dive

In computing, an optical disc drive is a disc drive that uses laser light or electromagnetic waves within or near the visible light spectrum as part of the process of reading or writing data to or from optical discs. Some drives can only read from certain discs, but recent drives can both read and record, also called burners or writers. Compact discs, DVDs, and Blu-ray discs are common types of optical media which can be read and recorded by such drives.

<span class="mw-page-title-main">ISO 13490</span> Successor to ISO 9660, an optical disc recording standard

ISO/IEC 13490 is the successor to ISO 9660, intended to describe the file system of a CD-ROM or CD-R.

<span class="mw-page-title-main">DVD Shrink</span> Optical disc authoring software

DVD Shrink is a freeware DVD transcoder program for Microsoft Windows that uses a DVD ripper to back up DVD video. The final versions are 3.2.0.15 (English) and 3.2.0.16 (German); all other versions, such as DVD Shrink 2010, are illegitimate. DVD Shrink's purpose is, as its name implies, to reduce the amount of data stored on a DVD with minimal loss of quality, although some loss of quality is inevitable. It creates a copy of a DVD, during which the DVD region code is removed, and copy protection may also be circumvented. A stamped DVD may require more space than is available on a writeable DVD, unless shrunk. Many commercially released video DVDs are dual layer ; DVD Shrink can make a shrunk copy which will fit on a single-layer writeable DVD, processing the video with some loss of quality and allowing the user to discard unwanted content such as foreign-language soundtracks.

<span class="mw-page-title-main">LightScribe</span> Printing technology that writes labels onto special optical discs

LightScribe is an optical disc recording technology that was created by the Hewlett-Packard Company. It uses specially coated recordable CD and DVD media to produce laser-etched labels with text or graphics, as opposed to stick-on labels and printable discs. Although HP is no longer developing the technology, it is still maintained and supported by a number of independent enthusiasts.

<span class="mw-page-title-main">Professional Disc</span> Proprietary optical disc format developed by Sony for storing digital video

Professional Disc (PFD) is a digital recording optical disc format introduced by Sony in 2003 primarily for XDCAM, its tapeless camcorder system. It was one of the first optical formats to utilize a blue laser, which allowed for a higher density of data to be stored on optical media compared to infrared laser technology used in the CD and red laser technology used in the DVD format.

An optical jukebox is a robotic data storage device that can automatically load and unload optical discs, such as Compact Disc, DVD, Ultra Density Optical or Blu-ray and can provide terabytes (TB) or petabytes (PB) of tertiary storage. The devices are often called optical disk libraries, "optical storage archives", robotic drives, or autochangers. Jukebox devices may have up to 2,000 slots for disks, and usually have a picking device that traverses the slots and drives. Zerras Inc. provides a removeable capsule that holds up to 200 discs per library which can be scaled-out to manage 1600 discs per 42U rack unit. The arrangement of the slots and picking devices affects performance and maintenance costs, depending on the robotics design, the space between a disk and the picking device. Seek times and transfer rates vary depending upon the optical technology used.

<span class="mw-page-title-main">DVD-R DL</span> DVD Recordable Dual Layer

DVD-R DL, also called DVD-R9, is a derivative of the DVD-R format standard. DVD-R DL discs hold 8.5 GB by utilizing two recordable dye layers, each capable of storing a little less than the 4.7 gigabyte (GB) of a single layer disc, almost doubling the total disc capacity. Discs can be read in many DVD devices and can only be written using DVD-R DL compatible recorders. It is part of optical disc recording technologies for digital recording to optical disc.

On an optical disc, a track (CD) or title (DVD) is a subdivision of its content. Specifically, it is a consecutive set of sectors on the disc containing a block of data. One session may contain one or more tracks of the same or different types. There are several kinds of tracks, and there is also a sub-track index for finding points within a track.

<span class="mw-page-title-main">DVD recordable</span> Recordable optical disk technology

DVD recordable and DVD rewritable are optical disc recording technologies. Both terms describe DVD optical discs that can be written to by a DVD recorder, whereas only 'rewritable' discs are able to erase and rewrite data. Data is written ('burned') to the disc by a laser, rather than the data being 'pressed' onto the disc during manufacture, like a DVD-ROM. Pressing is used in mass production, primarily for the distribution of home video.

<span class="mw-page-title-main">Optical disc recording technologies</span> List of technologies used to write to optical discs

Optical disc authoring requires a number of different optical disc recorder technologies working in tandem, from the optical disc media to the firmware to the control electronics of the optical disc drive.

<span class="mw-page-title-main">DiscT@2</span> Technology that allows the writing of visible graphics on common optical discs

DiscT@2 is a method of writing text and graphics to the data side of a CD-R or DVD disc first introduced by Yamaha in 2002. While often compared with the later LabelFlash and LightScribe technologies, which also offered users consumer-grade computerized disc labeling, DiscT@2 is different in that it required no proprietary media and wrote the graphics to the data side of the disc.

<span class="mw-page-title-main">CD-RW</span> Optical disk technology

CD-RW is a digital optical disc storage format introduced in 1997. A CD-RW compact disc (CD-RWs) can be written, read, erased, and re-written.

<span class="mw-page-title-main">Layer Jump Recording</span> Technique used for writing to DVD-R Dual Layer discs

Layer Jump Recording (LJR) is a writing method used for DVD-R DL.

<span class="mw-page-title-main">CDRWIN</span>

CDRWIN was a CD/DVD burning software for Microsoft Windows developed by Golden Hawk Technology company.

It progressed from lone wolf Jeff Arnold's hobby to a full-blown recording software that equals the power, performance, and features of many of the programs from the big boys.

The Image Mastering Application Programming Interface, or IMAPI, is a component of Microsoft Windows operating system used for CD and DVD authoring and recording.

<span class="mw-page-title-main">CD-ROM</span> Pre-pressed compact disc containing computer data

A CD-ROM is a type of read-only memory consisting of a pre-pressed optical compact disc that contains data. Computers can read—but not write or erase—CD-ROMs. Some CDs, called enhanced CDs, hold both computer data and audio with the latter capable of being played on a CD player, while data is only usable on a computer.

<span class="mw-page-title-main">Daemon Tools</span> Software for virtual drives

DAEMON Tools is a virtual drive and optical disc authoring program for Microsoft Windows and Mac OS.

References

  1. "IHAS524 LiteON PCSTATS Review - LiteON LabelTag Tested with DVD-R and CD-R Media".