See also
- Lathe, a machine tool
- Lat (disambiguation)
 | This disambiguation page lists articles associated with the title Lath. If an internal link led you here, you may wish to change the link to point directly to the intended article. |
A lath is a backing material for plaster that is applied to a wood or metal framework as matrix over which stucco or plaster is applied.
Lath may also refer to:
| | This disambiguation page lists articles associated with the title Lath. If an internal link led you here, you may wish to change the link to point directly to the intended article. |
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. Another imprecise term used for the material is stucco, which is also often used for plasterwork that is worked in some way to produce relief decoration, rather than flat surfaces.
Stucco or render is a construction material made of aggregates, a binder, and water. Stucco is applied wet and hardens to a very dense solid. It is used as a decorative coating for walls and ceilings, external building siding, and as a sculptural and artistic material in architecture. Stucco may be used to cover less visually appealing construction materials, such as metal, concrete, cinder block, or clay brick and adobe.
Lath and plaster is a building process used to finish mainly interior dividing walls and ceilings. It consists of narrow strips of wood (laths) which are nailed horizontally across the wall studs or ceiling joists and then coated in plaster. The technique derives from an earlier, more primitive, process called wattle and daub.
A lath or slat is a thin, narrow strip of straight-grained wood used under roof shingles or tiles, on lath and plaster walls and ceilings to hold plaster, and in lattice and trellis work.
Plasterwork is construction or ornamentation done with plaster, such as a layer of plaster on an interior or exterior wall structure, or plaster decorative moldings on ceilings or walls. This is also sometimes called pargeting. The process of creating plasterwork, called plastering or rendering, has been used in building construction for centuries. For the art history of three-dimensional plaster, see stucco.
A plasterer is a tradesman who works with plaster, such as forming a layer of plaster on an interior wall or plaster decorative moldings on ceilings or walls. The process of creating plasterwork, called plastering, has been used in building construction for centuries.
A stud finder is a handheld device used with wood buildings to locate framing studs located behind the final walling surface, usually drywall. While there are many different stud finders available, most fall into two main categories: magnetic stud detectors and electric stud finders. There are also some devices employing radar.
This glossary of woodworking lists a number of specialized terms and concepts used in woodworking, carpentry, and related disciplines.
Plaster veneer or plaster skim is a construction methodology for surfacing interior walls, by applying a thin layer of plaster over a substrate—typically over specially formulated gypsum board base, similar in nature to drywall.
Earthen plaster is a blend of clay, fine aggregate, and fiber. Other common additives include pigments, lime, casein, prickly pear cactus juice (Opuntia), manure, and linseed oil. Earthen plaster is usually applied to masonry, cob, or straw bale interiors or exteriors as a wall finish. It provides protection to the structural and insulating building components as well as texture and color.
A tin can wall is a wall constructed from tin cans, which are not a common building source. The cans can be laid in concrete, stacked vertically on top of each other, and crushed or cut and flattened to be used as shingles. They can also be used for furniture.
Lath art is a form of woodworking folk art for making rustic pictures out of strips out of old "lath" from "plaster and lath" walls. Today it is commonly made from lattice, lumber stickers and weathered lobster traps. Beach scenes and rural scenes are the most popular themes.
Expanded metal is a type of sheet metal which has been cut and stretched to form a regular pattern of metal mesh-like material. It is commonly used for fences and grates, and as metallic lath to support plaster or stucco.
Cement rendering is the application of a premixed layer of sand and cement to brick, concrete, stone, or mud brick. It is often textured, colored, or painted after application. It is generally used on exterior walls but can be used to feature an interior wall.
Wattle and daub is a composite building method used for making walls and buildings, in which a woven lattice of wooden strips called wattle is daubed with a sticky material usually made of some combination of wet soil, clay, sand, animal dung and straw. Wattle and daub has been used for at least 6,000 years and is still an important construction method in many parts of the world. Many historic buildings include wattle and daub construction, and the technique is becoming popular again in more developed areas as a low-impact sustainable building technique.
Wattle is a lightweight construction material made by weaving thin branches or slats between upright stakes to form a woven lattice. It has commonly been used to make fences and hurdles for enclosing ground or handling livestock. The wattle may be made as loose panels, slotted between timber framing to make infill panels, or it may be made in place to form the whole of a fence or wall. The technique goes back to Neolithic times.
Lime-ash floors were an economic form of floor construction from the 15th century to the 19th century, for upper floors in parts of England where limestone or chalk were easily available. They were strong, flexible, and offered good heat and sound insulation.
Hy-Rib was a brand name for a product manufactured by the Trussed Concrete Steel Company. It is an engineering reinforcement system for floors, walls, and ceilings of buildings and houses. This product is a derivative of the Kahn Trussed Bar for beams and columns that was invented by Julius Kahn. Kahn engineered the Hy-Rib products and they were first manufactured in 1909.
Mukund Lath was an Indian scholar and cultural historian, known for his writings on music, dance, aesthetics and culture of India. He was honored by the Government of India, in 2010, with the fourth highest Indian civilian award of Padma Shri.
Mersin State Art and Sculpture Museum is a museum in Mersin, Turkey. The museum is in the centrum at 36°47′56″N34°37′47″E. It is in a neighborhood known for galleries and Art Club of İçel.