Leadcutter sword

Last updated

Diagram depicting use of a leadcutter sword in sword feats, specifically the dissevering of a sheep carcass. Sheep dissevering sword feat.jpg
Diagram depicting use of a leadcutter sword in sword feats, specifically the dissevering of a sheep carcass.

The Leadcutter sword or lead cutter is a type of broad, heavy, specialist English sword or cutlass. [1] Popular in the 19th century, these weapons resemble an enlarged naval cutlass, consisting of single-edged, flatbacked blades with broad widths, often flexible and sometimes slightly curved, always with a full cutlass-type hilt. [2] The swords, heavier than standard cutlasses, were designed for strength training and for "sword feats" (most often the severing of specially made triangular lead bars, hence the name). These displays often included the dissevering of whole sheep's carcasses and of balanced lead bars in a single blow. [3] A prominent manufacturer of Leadcutters was Wilkinson Sword, who produced the sword in four sizes; Model 1 being the lightest, and Model 4 being the largest and heaviest. A Model 2 blade measures in at 31 inches in length and 1.75 inches in width, with a model 3 blade 33 inches long and 2 inches wide. [4] [5]

Related Research Articles

A sword is an edged, bladed weapon intended for manual cutting or thrusting. Its blade, longer than a knife or dagger, is attached to a hilt and can be straight or curved. A thrusting sword tends to have a straighter blade with a pointed tip. A slashing sword is more likely to be curved and to have a sharpened cutting edge on one or both sides of the blade. Many swords are designed for both thrusting and slashing. The precise definition of a sword varies by historical epoch and geographic region.

<span class="mw-page-title-main">Bayonet</span> Pointed weapon attached to the end of a firearm

A bayonet is a knife, dagger, sword, or spike-shaped weapon designed to fit on the end of the muzzle of a rifle, carbine, musket or similar firearm, allowing it to be used as a spear-like weapon. From the early 17th to the early 20th century, it was a weapon for infantry attacks. Today it is considered an ancillary weapon or a weapon of last resort, although it is still used for ceremonial purposes.

<i>Gladius</i> Sword

Gladius is a Latin word properly referring to the type of sword that was used by ancient Roman foot soldiers starting from the 3rd century BC and until the 3rd century AD. Linguistically, within Latin, the word also came to mean "sword", regardless of the type used.

<span class="mw-page-title-main">Hilt</span> Handle of a sword or similar weapon

The hilt of a knife, dagger, sword, or bayonet is its handle, consisting of a guard, grip and pommel. The guard may contain a crossguard or quillons. A tassel or sword knot may be attached to the guard or pommel.

<span class="mw-page-title-main">Sabre</span> Type of backsword

A sabre is a type of backsword with a curved blade associated with the light cavalry of the early modern and Napoleonic periods. Originally associated with Central European cavalry such as the hussars, the sabre became widespread in Western Europe during the Thirty Years' War. Lighter sabres also became popular with infantry of the early 17th century. In the 19th century, models with less curving blades became common and were also used by heavy cavalry.

A backsword is a type of sword characterised by having a single-edged blade and a hilt with a single-handed grip. It is so called because the triangular cross section gives a flat back edge opposite the cutting edge. Later examples often have a "false edge" on the back near the tip, which was in many cases sharpened to make an actual edge and facilitate thrusting attacks. From around the early 14th century, the backsword became the first type of European sword to be fitted with a knuckle guard.

<span class="mw-page-title-main">Kukri</span> Knife associated with the Gurkhas of Nepal

The kukri or khukuri is a type of short sword with a distinct recurve in its blade originated in the Indian subcontinent. It serves multiple purposes as a melee weapon and also as a regular cutting tool throughout most of South Asia. The kukri, khukri, and kukkri spellings are of Indian English origin, with the original Nepalese English spelling being khukuri.

A cutlass is a short, broad sabre or slashing sword, with a straight or slightly curved blade sharpened on the cutting edge, and a hilt often featuring a solid cupped or basket-shaped guard. It was a common naval weapon during the early Age of Sail.

<span class="mw-page-title-main">Kampilan</span> Sword

The kampilan is a type of single-edged sword, traditionally used by various ethnic groups in the Philippine archipelago. It has a distinct profile, with the tapered blade being much broader and thinner at the point than at its base, sometimes with a protruding spikelet along the flat side of the tip. The design of the pommel varies between ethnic groups, but it usually depicts either a buaya (crocodile), a bakunawa, a kalaw (hornbill), or a kakatua (cockatoo)..

<span class="mw-page-title-main">Classification of swords</span> Types of swords

The English language terminology used in the classification of swords is imprecise and has varied widely over time. There is no historical dictionary for the universal names, classification, or terminology of swords; a sword was simply a double-edged knife.

<span class="mw-page-title-main">Dusack</span> Sabre

A dusack is a single-edged sword of the cutlass or sabre type, in use as a side arm in Germany and the Habsburg monarchy during the 16th to 17th centuries, as well as a practice weapon based on this weapon used in early modern German fencing.

<span class="mw-page-title-main">Pistol sword</span> Sword with a pistol or revolver attached

A pistol sword is a sword with a pistol or revolver attached, usually alongside the blade. It differs from a rifle with a bayonet in that the weapon is designed primarily for use as a sword, and the firearm component is typically considered a secondary weapon designed to be an addition to the blade, rather than the sword being a secondary addition to the pistol. In addition, the two components of these weapons typically cannot be separated, unlike most bayonet-fixed rifles.

<span class="mw-page-title-main">Spadroon</span> Type of light sword

A spadroon is a light sword with a straight-edged blade, enabling both cut and thrust attacks. This English term first came into use in the early 18th century, though the type of sword it referred to was in common usage during the late 17th century. They were primarily used as a military sidearm in the late 17th and early 18th centuries, and for officers and NCOs in the latter part of the 18th and early 19th centuries. The type of sword also saw widespread use across Europe and America, though the term 'spadroon' is unique to the Anglophone world.

<span class="mw-page-title-main">Oakeshott typology</span> Medieval sword classification system

The Oakeshott typology is a way to define and catalogue the medieval sword based on physical form. It categorises the swords of the European Middle Ages into 13 main types, labelled X through XXII. The historian and illustrator Ewart Oakeshott introduced it in his 1960 treatise The Archaeology of Weapons: Arms and Armour from Prehistory to the Age of Chivalry.

<span class="mw-page-title-main">Gothic hilted British infantry swords</span>

The gothic hilted swords were a family of swords carried by officers and some NCOs of the British Army between 1822 and the present day. They were primarily infantry swords, although they were also regulation pattern for some other officers such as surgeons and staff officers. The term "Gothic hilt" is derived from a perceived similarity between the curved bars of the guard and the arches found in Gothic architecture. They were elegant aesthetically pleasing weapons, although they were considered by some to be mediocre fighting swords. The weapon and its variants had a very long service life.

<span class="mw-page-title-main">Pattern 1796 heavy cavalry sword</span> Weapon

The Pattern 1796 heavy cavalry sword was the sword used by the British heavy cavalry, and King's German Legion Dragoons, through most of the period of the Revolutionary and Napoleonic Wars. It played an especially notable role, in the hands of British cavalrymen, at the battles of Salamanca and Waterloo. The pattern was adopted by Sweden and was used by some Portuguese cavalry.

Private purchase naval weapons are maritime weapons that were used aboard ships other than those in regular navies. They were stocked on private vessels for either an offensive or defensive purpose that did not fall under any actual branch of any naval department. Thus, they do not bear standard government issue marks of their host country despite their use aboard said ships of that country. These weapons were important to maritime history because they equipped privateers, pirate vessels and merchant galleys as a means of defense. They were used just as their naval cousins in both attacking and defending during hostile boarding. Private purchase boarding axes were both used as a weapon and a tool for fires aboard ship. Other than their lack of government issue markings, they served the same purpose. Private ship owners lacked the resources of nations to supply their needs, so sometimes even rough blacksmith-made items of primitive manufacture were used.

<span class="mw-page-title-main">Mughal weapons</span>

Mughal weapons significantly evolved during the ruling periods of its various rulers. During its conquests throughout the centuries, the military of the Mughal Empire used a variety of weapons including swords, bows and arrows, horses, camels, elephants, some of the world's largest cannons, muskets and flintlock blunderbusses.

The Model 1852 Naval Officers Sword was a sword produced for the United States Navy, which entered service in 1852 and was in use during the American Civil War. It was the same style used by officers of the United States Revenue Cutter Service.

<span class="mw-page-title-main">Royal Navy cutlasses</span> Swords in British military service 1804–1936

Ratings of the Royal Navy have used cutlasses, short, wide bladed swords, since the early 18th century. These were originally of non-uniform design but the 1804 Pattern, the first Navy-issue standard cutlass, was introduced at the start of the 19th century. This was a bluntish weapon that was perhaps intended for cutting away canvas and ropes rather than as a thrusting combat weapon. The 1845 Pattern cutlass introduced a bowl-style hand guard which provided greater protection, with a longer and more curved blade. Its sharper point made it more useful for thrusting attacks, which were now emphasised in the drill manual. The 1845 Pattern was modified several times including shortening and straightening the blades, which weakened them. The 1889 Pattern had a straight, spear-pointed blade with a hilt that curved outwards to catch and redirect an opponent's sword point. The 1900 Pattern, the last navy-issue cutlass, was similar to its predecessor with the introduction of a fuller and a hilt insert that cushioned the user's little finger. The cutlass was withdrawn from service in 1936 but remains in use for ceremonial purposes. It is thought that it was last used in combat in 1900 during the Boxer Rebellion.

References

  1. "Australian War Memorial". Archived from the original on 11 December 2015. Retrieved 10 December 2015.
  2. Robson, Brian. Swords of the British Army pp. 266-268
  3. Barton, Mark & McGrath, John. British Naval Swords and Swordsmanship p.100-104, (2013)
  4. "Archived copy". Archived from the original on 11 December 2015. Retrieved 10 December 2015.{{cite web}}: CS1 maint: archived copy as title (link)
  5. "1870 British Lead-cutting Sword No.3 & Scabbard | Militaria | WARSTUFF". Archived from the original on 11 December 2015. Retrieved 10 December 2015.