Type | Privately held company |
---|---|
Industry | Aerospace |
Founded | circa 1985 |
Defunct | circa 2010 |
Fate | Out of business |
Headquarters | , |
Products | Homebuilt aircraft plans |
Light Miniature Aircraft was an American aircraft manufacturer based in Okeechobee, Florida. The company specialized in the design of ultralight aircraft and supplied plans for amateur construction. [1] [2] [3] [4]
The company seems to have gone out of business about 2010, but Wicks Aircraft continues to provide kits for the designs. [5] [6]
The company's LM-1, 2 and 3 family of aircraft were designed in the mid-1980s during the initial ultralight boom. At the time many pilots did not find the typical early "flying lawnchair" ultralights confidence inspiring or appealing. The company's designs were intended to fit the same FAR Part 103 rules, including its 254 lb (115 kg) empty weight, but provide aircraft that look and fly like a traditional light aircraft. However, many of the designs result in completed aircraft that are heavier than the US ultralight rule empty weight limit. [3]
The LM-1 family of designs are built from wood, or optionally 4130 steel tube and finished with doped aircraft fabric covering. The completion involves minor changes in the cowling, window and tail shapes to make them resemble well-known light aircraft designs. The first in the series, the LM-1 is a single seat 75-85% scale replica of a Piper J-3 Cub and was first flown in 1985. The LM-2 is a single or two seat 75% scale replica of a Taylorcraft B, while the LM-3 is a single seat 75% scale replica of an Aeronca Champ. The follow-on Light Miniature Aircraft LM-5 is a full-sized tandem two-seat replica of the Piper PA-18 Super Cub. [1] [2] [3] [4]
The LM-J3-W is a full-sized two-seat J-3 Cub replica, while the LM-TC-W is a full-sized two-seats in side-by-side configuration Taylorcraft replica, both rendered in wood and fabric. [7]
Model name | First flight | Number built | Type |
---|---|---|---|
Light Miniature Aircraft LM-1 | 1985 | Single seat 75-85% scale replica of the Piper J-3 Cub | |
Light Miniature Aircraft LM-2 | 1987 | Single or two seat 75% scale replica of the Taylorcraft B | |
Light Miniature Aircraft LM-3 | 1987 | Single seat 75% scale replica of the Aeronca Champ | |
Light Miniature Aircraft LM-5 | 1991 | more than 35 (2007) | Tandem two-seat full-sized replica of a Piper PA-18 Super Cub |
Light Miniature Aircraft LM-J3-W | Tandem two-seat full-sized replica of a Piper J-3 Cub | ||
Light Miniature Aircraft LM-TC-W | Two-seat in side-by-side configuration full-sized replica of a Taylorcraft | ||
The Piper PA-8 Skycycle was a 1940s American single-seat light aircraft designed and built by Piper Aircraft at their Lock Haven, Pennsylvania plant. Towards the end of 1944 Piper announced a number of aircraft it intended to build after the war. One of these was the PWA-8. An aerodynamic test aircraft was built with the name Cub Cycle and it first flew on 27 August 1944 with a small two–cylinder Franklin engine. The Franklin engine was replaced by a four–cylinder Continental A-40-3 of 37 hp (28 kW); the aircraft first flew with the Continental engine on 12 September 1944. The Skycycle was a fabric-covered mid-wing single-engined single-seat monoplane with a tailwheel landing gear. The fuselage was produced using an auxiliary belly fuel tank as used on the F4U Corsair. The Cub Cycle was scrapped and a similar but new aircraft was built with the name Skycycle, which first flew on 29 January 1945 using the same Continental engine as the Cub Cycle. The aircraft was further modified in 1945 with a four-cylinder 55 hp (41 kW) Lycoming O-145-A2 engine and designated the PA-8 Skycycle. No further examples were built.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Airdrome Eindecker E-III is a single-seat, mid-wing, conventional landing gear fighter aircraft replica produced in kit form by Airdrome Aeroplanes of Holden, Missouri.
The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.
The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.
The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.
The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.
The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The Light Miniature Aircraft LM-5 series is a family of American high-wing, conventional landing gear, strut-braced, single-engine ultralight aircraft that are intended to resemble the Piper PA-18 Super Cub. The designs are all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
RagWing Aircraft Designs was an American aircraft design and manufacturing company based in Taylors, South Carolina.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
Carlson Aircraft is an American aircraft design and manufacturing company based in East Palestine, Ohio.
The Sands Replica 1929 Primary Glider is an American high-wing, wire-braced single-seat, primary glider that was designed by Ron Sands Sr for amateur construction, with kits supplied by Wicks Aircraft Supply. The plans are now sold by Sands' son, Ron Sands Jr.
Teratorn Aircraft, Inc. was an American aircraft manufacturer based in Clear Lake, Iowa. The company specialized in the design and manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft under the US FAR 103 Ultralight Vehicles rules.
Golden Circle Air, Inc. was an American aircraft manufacturer based in De Soto, Iowa. The company specialized in the manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft under the US FAR 103 Ultralight Vehicles rules.
Pop's Props was an American aircraft manufacturer, founded by Scott Land in about 1994 and based in Cooksville, Illinois. The company specialized in the design and manufacture of ultralight aircraft in the form of plans and kits for amateur construction and operation under the US FAR 103 Ultralight Vehicles rules.
The Wag-Aero Group is an American aircraft manufacturer that was founded by Dick and Bobbie Wagner in the 1960s and is based in Lyons, Wisconsin. The company specializes in the design and manufacture of kit aircraft and aircraft parts for amateur construction.
Sorrell Aviation was an American aircraft manufacturer based in Tenino, Washington, founded by Hobart C Sorrell and sons John, Mark and Tim in about 1958. The company specialized in the design and manufacture of light aircraft in the form of plans and kits for amateur construction including for the US FAR 103 Ultralight Vehicles rules.