Loening M-2 Kitten

Last updated
M-2 Kitten
LoeningM-2Kitten1918.jpg
Loening M-2 Kitten in 1918
RoleUltralight
National origin United States
Manufacturer Loening
First flight1918
Primary user United States Navy
Number built3 (plus 1 x Loening M-3)

The Loening M-2 Kitten was a light aircraft produced in the United States at the end of the 1920s, for use aboard capital ships and submarines of the United States Navy (USN).

Contents

Design

The M-2 was a small monoplane designed for operation from battleships or submarines, with either floats or wheels for operations. Three aircraft were built with USN serials A442-A444; [1] the first used an ABC Gnat, but the others were powered by a Lawrance L-3 radial engine.

Loening developed a dedicated floatplane version of the M-2, the Loening M-3, of which one airframe (Navy serial A5469) was built for the Navy. [2]

Specifications (M-2 landplane)

Data from Aerofiles : Loening [2]

General characteristics

Floatplane: 240 lb (110 kg)
Floatplane: 17 ft 4 in (5.28 m)
Floatplane: 25 ft 2 in (7.67 m)
(#1) 32 hp (24 kW) ABC Gnat 2-cylinder air-cooled horizontally-opposed piston engine

Performance

Related Research Articles

Mitsubishi F1M Japanese reconnaissance floatplane

The Mitsubishi F1M was a Japanese reconnaissance floatplane of World War II. It was the last biplane type of the Imperial Japanese Navy, with 944 built between 1936 and 1944. The Navy designation was "Type Zero Observation Seaplane" (零式水上観測機).

Blackburn Shark

The Blackburn Shark was a British carrier-borne torpedo bomber built by the Blackburn Aircraft company in England. It first flew on 24 August 1933 and went into service with the Fleet Air Arm, Royal Canadian Air Force, Portuguese Navy, and the British Air Observers' School, but was already obsolescent by 1937 and in the following year, replacement by the Fairey Swordfish began.

Curtiss YA-10 Shrike American attack aircraft prototype

The Curtiss YA-10 Shrike was a 1930s United States test and development version of the A-8 Shrike ground-attack aircraft using various radial engines in place of the inline Vee.

The Naval Aircraft Factory TS-1 was an early biplane fighter aircraft of the United States Navy, serving from 1922 to 1929.

Aichi H9A

The Aichi H9A was an Imperial Japanese Navy Air Service flying boat used during the first years of World War II for crew training. An uncommon type, it was not encountered by Allied forces until spring 1945, and was never assigned an Allied reporting name.

Douglas T2D

The Douglas T2D was an American twin-engined torpedo bomber contracted by the military, and required to be usable on wheels or floats, and operating from aircraft carriers. It was the first twin-engined aircraft to be operated from an aircraft carrier.

Hawker Dantorp

The Hawker Dantorp H.B. III was a Danish single-engined biplane bomber of the 1930s. The aircraft was a development of the British Hawker Horsley designed for the Danish Navy, but differed in being powered by a radial engine and having a third crew member. Two examples were built in Britain as a precursor to license production in Denmark. Financial constraints meant this was not realised and the Hawker-built examples were the only aircraft produced. They served until the German invasion of Denmark in 1940.

Lawrance J-1

The Lawrance J-1 was an engine developed by Charles Lanier Lawrance and used in American aircraft in the early 1920s. It was a nine-cylinder, air-cooled radial design.

Huff-Daland TA-2

The Huff-Daland TA-2 was an American biplane trainer designed by the Huff-Daland Aero Corporation in the early 1920s for the United States Army Air Service.

Bellanca 31-40

The Bellanca 31-40 Senior Pacemaker and its derivatives were a family of a six- and eight-seat utility aircraft built in the United States in the late 1930s. They were the final revision of the original late 1920s Wright-Bellanca WB-2 design. The model numbers used by Bellanca in this period reflected the wing area and engine horsepower, each divided by ten. Like their predecessors, these were high-wing braced monoplanes with conventional tailwheel undercarriage.

Convair XP6Y

The Convair P6Y was an unbuilt aircraft designed by Convair in the 1950s. The design was initiated to meet a requirement of the United States Navy (USN) for an anti-submarine warfare seaplane.

Cox-Klemin XS

The Cox-Klemin XS was a 1920s American experimental scout biplane, the first aircraft to be launched and recovered from a submarine.

Keystone Pronto 1920s US mail plane design

The Keystone K-55 Pronto was a mail plane developed in the United States in the late 1920s.

The ABC Gnat was a 45 hp (34 kW) two-cylinder aero engine designed by British engineer Granville Bradshaw for use in light aircraft. The Gnat was built by ABC Motors, first running in 1916, production ceased in December 1918. 17 engines were built from an original order of 18.

Naval Aircraft Factory N2N

The Naval Aircraft Factory N2N was an American two-seat open-cockpit primary training biplane designed and built by the Naval Aircraft Factory. The N2N could be fitted with twin-floats and was powered by a 200 hp Lawrance J-1 radial engine, only three N2N-1s were built.

Loening XSL

The Loening SL was an American submarine-based reconnaissance flying boat designed and built by Loening Aeronautical Engineering for the United States Navy.

Curtiss-Wright CA-1

The Curtiss CA-1 was an American five-seat biplane amphibian designed by Frank Courtney and built by Curtiss-Wright at St Louis, Missouri.

Loening C-1 1920s American aircraft

The Loening C-1 Air Yacht was an amphibious airliner produced in the United States at the end of the 1920s.

The Kawanishi E13K, company designation AM-19, was a Japanese 1930s three-seat reconnaissance floatplane.

G Elias & Brother American Aircraft Manufacturer

G Elias & Brother was and American manufacturer of cabinets and aircraft based in Buffalo, New York in the 1920s. A.G. Elias sat on the Manufacturers Aircraft Association's board of directors along with President Frank H. Russell, VP Glenn L. Martin, Charles L. Laurence, Chance M. Vought, S.S. Bradley, George P. Tidmarsh, and Donald Douglas. E.J Elias promoted the construction of a Buffalo municipal airport to aid the local fledgling airplane industry of five aviation companies constructing airplanes and airplane parts. From 1920 to 1925, Elias company's chief engineer, David Earle Dunlap (1896-1957), designed the Elias EM-2 Expeditionary planes. He designed the NBS-3 bomber fuselage and the Elias M-1 Mail plane. Dunlap's Elias TA-1 design was the first United States Army Air Corps Trainer to have a radial engine. After tests a McCook Field, the Army Air Corps selected other manufacturers over the Elias bomber and trainer. The company designed the Elias EM-1 to meet requirements for a multirole amphibian marine expeditionary aircraft. Elias delivered six production Elias EM-2 aircraft with Liberty engines to the United States Navy in 1922.

References

  1. Baugher, Joe. "US Navy and US Marine Corps BuNs, First Series - A51 to A6001". www.joebaugher.com. Retrieved 6 February 2019.
  2. 1 2 Eckland, K.O. (11 March 2008). "Loening". aerofiles.com. Retrieved 6 February 2019.