 | This article needs additional citations for verification .(March 2018) |
Louis Heinrici (1847 - c.1930) was a German industrialist and manufacturer.
| | This article needs additional citations for verification .(March 2018) |
Louis Heinrici (1847 - c.1930) was a German industrialist and manufacturer.
Louis Heinrici was born on 30 July 1847 in Torgau and died c.1930 in Zwickau. He married Marie Elisabeth (Born Deustler) with whom he had three sons: Joseph Hans Louis Heinrici, Ernst Hermann Heinrici and Rudolf Heinrici.
In 1876, Louis Heinrici began to manufacture hot air engines, and other small engines, initially in rented rooms. His first factory building was built in 1884 in Zwickau (Saxony). The factory started with two workers, a lathe and a forge. The official company name was: Louis Heinrici, mechanical workshops for precision work, Zwickau in Saxony. The hot-air engines produced by Heinrici, as a mass-produced product, were widely used in the commercial and private sectors because they served as inexpensive and reliable sources of power.
In 1914, the factory had areas for metalworking, plumbing, a paint shop, another building for the turning shop and a laboratory and trial room for test runs, as well as an office building for sales offices and warehouses. In the park-like landscaped gardens were ponds 4 metres in diameter. These were provided with decorative fountains, which were powered by Heinrici engines.
In his 1914 catalogue, Heinrici stated: "Today after 38 years of activity, I still make the same article on a large scale, which I - thanks to thorough study of all relevant issues of a scientific and technical nature for the construction of such machines, as well as tireless forward striving for attainable perfection - have achieved first place in world trade". After 38 years, Heinrici had sold 21,000 machines.
For several decades, Louis Heinrici had built hot air engines in twelve sizes from 26 to 190 mm piston diameter and in the power range from 1.5 W to 0.2 kW. The larger machines used liquid cooling while, in the smaller ones, air cooling was sufficient. The running speed under load was between 120 and 200 revolutions per minute. The power output, by piston diameter, was:
The above may not be a complete list. The Stirling Engine website gives some intermediate sizes. [1] In the 1920s, Ernst Heinrici introduced an improved engine which could be run at up to 400 rpm. It was available in six sizes from 1/50 to 1/2 horsepower and was on sale up to 1940. [2]
The machines could be heated by gas, liquid or solid fuels (luminescent gas, kerosene, wood). They weighed between 26 kg for the smallest and 660 kg for the largest machine.
Engineer E. Patzert, then a teacher of engineering at a school in Zwickau, carried out tests on some Heinrici machines and stated in his test report: "The experimental engines, all of which were chosen casually from a number of completed machines, were characterized by quiet, steady running and were, in terms of lubrication and maintenance, extremely undemanding".
Advantages of the machines included:
An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.
A reciprocating engine, also often known as a piston engine, is typically a heat engine that uses one or more reciprocating pistons to convert high temperature and high pressure into a rotating motion. This article describes the common features of all types. The main types are: the internal combustion engine, used extensively in motor vehicles; the steam engine, the mainstay of the Industrial Revolution; and the Stirling engine for niche applications. Internal combustion engines are further classified in two ways: either a spark-ignition (SI) engine, where the spark plug initiates the combustion; or a compression-ignition (CI) engine, where the air within the cylinder is compressed, thus heating it, so that the heated air ignites fuel that is injected then or earlier.
The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. It resembles a stylized star when viewed from the front, and is called a "star engine" in some other languages.
The Bristol Hercules is a 14-cylinder two-row radial aircraft engine designed by Sir Roy Fedden and produced by the Bristol Engine Company starting in 1939. It was the most numerous of their single sleeve valve designs, powering many aircraft in the mid-World War II timeframe.
A Stirling engine is a heat engine that is operated by the cyclic compression and expansion of air or other gas between different temperatures, resulting in a net conversion of heat energy to mechanical work.
Robert Stirling was a Scottish clergyman and engineer. He invented the Stirling engine and was inducted into the Scottish Engineering Hall of Fame in 2014.
The Stirling cycle is a thermodynamic cycle that describes the general class of Stirling devices. This includes the original Stirling engine that was invented, developed and patented in 1816 by Robert Stirling with help from his brother, an engineer.
The Monosoupape, was a rotary engine design first introduced in 1913 by Gnome Engine Company. It used a clever arrangement of internal transfer ports and a single pushrod-operated exhaust valve to replace the many moving parts found on more conventional rotary engines, and made the Monosoupape engines some of the most reliable of the era. British aircraft designer Thomas Sopwith described the Monosoupape as "one of the greatest single advances in aviation".
The Ericsson cycle is named after inventor John Ericsson who designed and built many unique heat engines based on various thermodynamic cycles. He is credited with inventing two unique heat engine cycles and developing practical engines based on these cycles. His first cycle is now known as the closed Brayton cycle, while his second cycle is what is now called the Ericsson cycle. Ericsson is one of the few who built open-cycle engines, but he also built closed-cycle ones.
A hot air engine is any heat engine that uses the expansion and contraction of air under the influence of a temperature change to convert thermal energy into mechanical work. These engines may be based on a number of thermodynamic cycles encompassing both open cycle devices such as those of Sir George Cayley and John Ericsson and the closed cycle engine of Robert Stirling. Hot air engines are distinct from the better known internal combustion based engine and steam engine.
The Lycoming XR-7755 was the largest piston aircraft engine ever built in the United States, with 36 cylinders totaling about 7,750 in³ (127 L) of displacement and a power output of 5,000 horsepower (3,700 kilowatts). It was originally intended to be used in the "European bomber" that eventually emerged as the Convair B-36. Only two examples were built before the project was terminated in 1946.
A gas turbine locomotive is a type of railway locomotive in which the prime mover is a gas turbine. Several types of gas turbine locomotive have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels (drivers). A gas turbine train typically consists of two power cars, and one or more intermediate passenger cars.
The Bourke engine was an attempt by Russell Bourke, in the 1920s, to improve the two-stroke internal combustion engine. Despite finishing his design and building several working engines, the onset of World War II, lack of test results, and the poor health of his wife compounded to prevent his engine from ever coming successfully to market. The main claimed virtues of the design are that it has only two moving parts, is lightweight, has two power pulses per revolution, and does not need oil mixed into the fuel.
An axial engine is a type of reciprocating engine with pistons arranged around an output shaft with their axes parallel to the shaft. Barrel refers to the cylindrical shape of the cylinder group whilst the Z-crank alludes to the shape of the crankshaft.
This timeline of heat engine technology describes how heat engines have been known since antiquity but have been made into increasingly useful devices since the 17th century as a better understanding of the processes involved was gained. A heat engine is any system that converts heat to mechanical energy, which can then be used to do mechanical work.They continue to be developed today.
The hot-bulb engine is a type of internal combustion engine in which fuel ignites by coming in contact with a red-hot metal surface inside a bulb, followed by the introduction of air (oxygen) compressed into the hot-bulb chamber by the rising piston. There is some ignition when the fuel is introduced, but it quickly uses up the available oxygen in the bulb. Vigorous ignition takes place only when sufficient oxygen is supplied to the hot-bulb chamber on the compression stroke of the engine.
The Nakajima Ha1 Kotobuki was an aero-engine developed by Nakajima. It was a radial piston developed under licence from the Bristol Jupiter.
The Alvis Pelides was an unflown British air-cooled radial aero engine first developed in 1936. The Pelides Major was a projected but unbuilt development as were the Alcides, Alcides Major and the Maeonides Major, the Alvis aircraft engine range taking their names from Greek mythology.
From 1905 to 1915, Alessandro Anzani built a number of three-cylinder fan engines and radial engines, one of which powered Louis Blériot's 1909 cross-channel flight. An Anzani three-cylinder engine that powers a Blériot XI based in England is thought to be the oldest airworthy engine in the world.
A vacuum engine derives its force from air pressure against one side of the piston, which has a partial vacuum on the other side of it. At the beginning of an outstroke, a valve in the head of the cylinder opens and admits a charge of burning gas and air, which is trapped by the closing of the valve and expands. Towards the end of the stroke the charge comes into contact with a water- or air-cooled part of the cylinder and is chilled, causing a sudden drop in pressure sufficient to suck the piston – which is open towards the crank – back on the return stroke. The valve opens again in time for the piston to expel the burnt gases before the next outstroke begins.
