M-class blimp

Last updated
M class
M class blimp.jpg
RoleASW airship
Manufacturer Goodyear Aircraft Corporation
First flight1944
Retired1956
Primary user US Navy
Number built4

The Goodyear Aircraft Company of Akron, Ohio built the M-class blimp for the US Navy as the follow-on to the K-class anti-submarine warfare blimp used during World War II. It was a significantly larger airship, 50% larger than its predecessor. Four airships, designated M-1 through M-4, were delivered in early 1944. Operations of K-ships in tropical regions had shown a need for a blimp with greater volume to offset the loss of lift due to high ambient temperatures.

Contents

A contract was awarded to the Goodyear Aircraft Company for the prototype M-class blimp on August 16, 1943. This contract was followed by another contract on September 11, 1943 for 21 M-class blimps. These airships were given the Navy designation of ZNP-M, (Z = lighter-than-air; N = non-rigid; P = patrol; M = type/class.) However, on November 22, 1943, the quantity of blimps was reduced to four. These were delivered to the Navy in February, March, and April 1944. The M-Class airships were retired from service by 1956. The gondola of the M-4 was retained in the conservation area at NAS Lakehurst until the mid-1970s.

The M-class blimps were 310 feet (94 m) long with a 117-foot (36 m) long control car. In order to maintain the proper loading on the catenary, the control car was built in three sections with universal joints between the sections. The catenary is the webbing internal to the envelope from which the control car is hung from the top of the envelope. Control of the weight distribution from the catenary is necessary to control wrinkling of the envelope. The capacity of the envelope of the M-1 was 625,000 cu ft (17,698 m3) with an increase in capacity to 647,000 cu ft (18,321 m3) for M-2 through M-4. These airships were powered by two Pratt & Whitney radial air-cooled engines.

Goodyear produced a final follow-on design, the N-class blimp, in the 1950s. The N-class was 50% larger than its predecessor, which was itself 50% larger than the K-class.

Specifications (M-2)

General characteristics

Performance

Armament

Related Research Articles

Airship Powered lighter-than-air aircraft

An airship or dirigible balloon is a type of aerostat or lighter-than-air aircraft that can navigate through the air under its own power. Aerostats gain their lift from a lifting gas that is less dense than the surrounding air.

K-class blimp Class of non-rigid airships built by the Goodyear Aircraft Company for the U.S. Navy (1938-59)

The K-class blimp was a class of blimps built by the Goodyear Aircraft Company of Akron, Ohio for the United States Navy. These blimps were powered by two Pratt & Whitney Wasp nine-cylinder radial air-cooled engines, each mounted on twin-strut outriggers, one per side of the control car that hung under the envelope. Before and during World War II, 134 K-class blimps were built and configured for patrol and anti-submarine warfare operations, and were extensively used in the Navy’s anti-submarine efforts in the Atlantic and Pacific Ocean areas.

G-class blimp American non-rigid airship

The G-Class Blimps were a series of non-rigid airships (blimps) used by the United States Navy. In 1935, instead of developing a new design airship, the Navy purchased the Goodyear Blimp Defender for use as a trainer and utility airship assigning it the designator G-1. Defender was built by the Goodyear Aircraft Company of Akron, Ohio and was the largest blimp in the company’s fleet of airships that were used for advertising and as passenger airships. Goodyear built additional G-class airships for the Navy during World War II to support training needs.

L-class blimp Class of non-rigid airships built by Goodyear Aircraft Company for the U.S. Navy (1930s)

The L-class blimps were training airships operated by the United States Navy during World War II. In the mid-1930s, the Goodyear Aircraft Company built a family of small non-rigid airships that the company used for advertising the Goodyear name. In 1937 the United States Navy awarded a contract for two different airships, K-class blimp designated K-2 and a smaller blimp based upon Goodyear's smaller commercial model airship used for advertising and passenger carrying. The smaller blimp was designated by the Navy as L-1. It was delivered in April 1938 and operated from the Navy's lighter-than-air facility at Lakehurst, New Jersey. In the meantime, the Navy ordered two more L-Class blimps, the L-2 and L-3, on September 25, 1940. These were delivered in 1941. L-2 was lost in a nighttime mid-air collision with the G-1 on June 8, 1942.

J-class blimp

The J-class blimps were non-rigid airships designed by the Navy Bureau of Aeronautics and Goodyear Tire & Rubber Company in the early 1920s for the US Navy.

N-class blimp

The N-Class, or as popularly known, the "Nan ship", was a line of non-rigid airships built by the Goodyear Aircraft Company of Akron, Ohio for the US Navy. This line of airships was developed through many versions and assigned various designators as the airship designation system changed in the post World War II era. These versions included airships configured for both anti-submarine warfare and airborne early warning (AEW) missions.

SSZ class airship

The SSZ non-rigid airships or "blimps" were developed in United Kingdom during World War I from the earlier SS class. The main role of these craft was to escort convoys and scout or search for German U-boats. A secondary purpose was to detect and destroy mines.

B-class blimp

The B class blimps were patrol airships operated by the United States Navy during and shortly after World War I. The Navy had learned a great deal from the DN-1 fiasco. The result was the very successful B-type airships. Dr. Jerome Hunsaker was asked to develop a theory of airship design, Lt. John H. Towers had returned from Europe having inspected British designs, and using reports from attachés on British airship operations, the Navy was prepared to seek bids for blimps from American manufacturers. On 4 February 1917 the Secretary of the Navy directed that 16 nonrigid airships of Class B be procured. A February 12, 1917 meeting with the Chief of the Bureau of Construction and Repair, and representatives of Goodyear, Goodrich, Connecticut Aircraft Company, Curtiss Aeroplane and Motor Corporation, and U.S. Rubber Company, it was agreed that the order for 16 dirigibles was beyond the capability of any one company. The conference resulted in a committee to coordinate on sharing raw materials, information and experience. Ultimately Goodyear manufactured 9 envelopes, Goodrich made 5 and Curtiss assembled the gondolas for all of those 14 ships. Connecticut Aircraft contracted with U.S. Rubber for its two envelopes and with Pigeon Fraser for its gondolas. The Curtiss-built gondolas used by Goodyear and Goodrich used modified Curtiss JN-4 fuselages powered by Curtiss OXX engines. The Connecticut Aircraft blimps were powered by Hall-Scott engines. One ship, B-20 was equipped with a special control car. All B-Class airships were delivered to the Navy between August 1917 (B-1) and September 1918 (B-20).

C-class blimp

The C-class blimp was a patrol airship developed by the US Navy shortly after World War I, a systematic improvement upon the B-type which was very suitable for training, but of limited value for patrol work. Larger than the B-class, these blimps had two motors and a longer endurance. Once again, the envelope production was split between Goodyear and Goodrich, with control cars being built by the Burgess division of Curtiss Aeroplane and Motor Company. Originally the Navy ordered 30 but reduced the number to 10 after the armistice in November 1918. All ten of the "C" type airships were delivered in late 1918, and examples served at all of the Navy's airship stations from 1918 to 1922. In 1921, the C-7 was the first airship ever to be inflated with helium. The Navy decommissioned its last two remaining C-type blimps, the C-7 and C-9 in 1922.

D-class blimp

The D class blimp was a patrol airship used by the US Navy in the early 1920s. The D-type blimps were slightly larger than the C-type and had many detail improvements. The Navy continued the practice of dividing the envelope production between Goodyear and Goodrich. The control cars were manufactured by the Naval Aircraft Factory. The major improvements over the C-type blimps were a better control car design and easier, more reliable controls and instrumentation. The engines were moved to the rear to reduce noise and allow better communications between crew members. The fuel tanks were suspended from the sides of the envelope. The envelope was identical to the C-type, except an additional six-foot panel was inserted for a total length of 198 feet (60 m) and a volume of 190,000 cubic feet (5,400 m3). The last of the D-Class, D-6, had a different control car designed by Leroy Grumman who later founded the Grumman Aircraft Engineering Corporation.

E-class blimp

The E class of US Navy blimps comprised a single airship, built during World War I by Goodyear as one of a group of three small blimps offered to the US government. Two were purchased for the US Navy and one for the US Army. The Navy blimps were designated E-1, F-1, and the Army airship A-1. These airships had identical envelopes but different cars. The E-1 was delivered to Pensacola, Florida in December 1918. It was flown only at Pensacola serving as a trainer at the Airship School. A new envelope was provided in December 1920. E-1 was retired from service sometime in 1924.

F-class blimp

The F class of US Navy blimps comprised a single airship, built during World War I by Goodyear as one of a group of three small blimps offered to the US government. Two were purchased for the US Navy and one for the US Army. The Navy blimps were designated E-1, F-1, and the Army airship A-1. Classified as an "Experimental Engine Testing Dirigible." F-1 had the same envelope size as the E-1, due to the use of a tractor mounted 125 hp Union engine, the performance was different. F-1 spent its entire career at Hampton Roads. It was flown in both tractor and pusher configurations. It also may have been flown with a Curtiss OXX engine. F-1 was removed from inventory in November 1923.

H-class blimp 1921 blimp of the United States Navy

The H class blimp was an observation airship built for the U.S. Navy in the early 1920s. The original "H" Class design of 1919 was for a twin engined airship of approximately 80,000 cubic feet volume. Commander Lewis Maxfield suggested that a small airship which could be used either as a tethered kite balloon, or be towed by a ship until releasing its cable, would be able to scout on its own. The concept was an airship similar to the later Army Motorized Kite Balloons.

The K-1 was an experimental blimp designed by the United States Navy in 1929. Due to the inability to get Congressional approval for the construction of an airship the navy used the ploy of ordering a "universal" control car which could be used on the J-type airships from the Naval Aircraft Factory. An order was placed with Goodyear Tire and Rubber Company for an envelope to hold "experimental gases". To complete the deception, there is no record of the US Navy assigning a serial number to the K-1, Standard Army TC type tail fins were procured from Goodyear. Unlike past Navy blimps, the control car was not suspended from external cables, but was hung from cables attached to the top of the envelope, and the car was carried flush against the envelope as in modern blimps. The control car carried bunks and a galley so that a relief crew could be carried, and was completely enclosed. The K-1 was also the first Navy blimp to have a taxi wheel. Like the Graf Zeppelin, the fuel for the K-1 was "blau gas" a mixture of combustible gases with the same density as air, which meant that the valving of gas as the fuel was consumed was not necessary. The only serious drawback was the tendency of the fuel to leak into the helium which then could not be run through the Lakehurst purification plant, which meant the expensive helium had to be vented to atmosphere when too contaminated or an overhaul was necessary.

The Goodyear Type AD was a small airship built in the United States in the mid-1920s. The first example, christened Pilgrim, was Goodyear's first civil airship, and their first airship to use helium as its lift gas. Originally intended for pleasure cruising, it soon found its true calling as a promotional vehicle as the first "Goodyear Blimp" in a line that has continued for over ninety years. The Type AD was a conventional blimp design with a gondola that could carry two passengers in addition to the flight crew. While usually described as a non-rigid type, the design in fact incorporated a triangular-section magnesium girder as a keel, fastened inside the envelope. The craft carried its own collapsible mooring mast which allowed it to "land" anywhere that 250 ft × 250 ft of clear ground was available.

Goodyear GZ-20

The Goodyear GZ-20 was a blimp class introduced in 1969 in the United States by Goodyear as its signature promotional aircraft, the Goodyear Blimp. The design is a development of the GZ-19 class, featuring a larger envelope to carry the "Super-Skytacular" night sign and more powerful engines. The GZ-20s were the mainstay of Goodyear's airship fleet until 2017, when they were replaced with the Zeppelin NT semi-rigid airship.

The C-Star class of non-rigid airships or "blimps" were used by Britain's Royal Naval Air Service for convoy escort duties during World War I. Developed from the Coastal class, the "*" in their designation indicated a modification of the original class which they slowly replaced in service.

SS class airship

SSclass airships were simple, cheap and easily assembled small non-rigid airships or "blimps" that were developed as a matter of some urgency to counter the German U-boat threat to British shipping during World War I. A secondary purpose was to detect and destroy mines. The class proved to be versatile and effective, with a total of 158 being built in several versions.

The SST class of non-rigid airship or "blimp" was developed in Great Britain during World War I from the earlier SS class airship. The main role of these craft was to escort convoys and scout or search for German U-boats. A secondary purpose was to detect and destroy mines.

The Loral GZ-22 was a class of non-rigid airship, or blimp first flown in 1989 and operated by Goodyear as its flagship promotional aircraft, with civil registration N4A and christened Spirit of Akron. This was the only airship of this class ever built. Goodyear originally designed the GZ-22 to demonstrate the possible renewed use of airships to the United States Navy, which had ended their airship operations in 1962. The GZ-22 was designed by Goodyear, but built by Loral after Goodyear sold its aerospace division to Loral in 1987. The GZ-22 had a steel-framed, composite-skinned gondola under a neoprene-impregnated polyester 2-ply envelope, inflated with helium. At its launch in 1987, the 205-foot 6-inch long Spirit of Akron was the longest airship in service at that time. The GZ-22 Type Certificate was issued on 31 August 1989.

References


See also

Related lists