Machine orders

Last updated

Machine orders data (also known as machine tool order data) is a figure issued by Japan Machine Tool Builders Association (JMTBA) every month. It serves as one indicator of the Japanese economy. [1] In the forex market, the release of such data is often followed by sharp change in currency exchange rate.

Related Research Articles

An order of magnitude is an approximation of the logarithm of a value relative to some contextually understood reference value, usually 10, interpreted as the base of the logarithm and the representative of values of magnitude one. Logarithmic distributions are common in nature and considering the order of magnitude of values sampled from such a distribution can be more intuitive. When the reference value is 10, the order of magnitude can be understood as the number of digits in the base-10 representation of the value. Similarly, if the reference value is one of some powers of 2, since computers store data in a binary format, the magnitude can be understood in terms of the amount of computer memory needed to store that value.

<span class="mw-page-title-main">Debugger</span> Computer program used to test and debug other programs

A debugger or debugging tool is a computer program used to test and debug other programs. The main use of a debugger is to run the target program under controlled conditions that permit the programmer to track its execution and monitor changes in computer resources that may indicate malfunctioning code. Typical debugging facilities include the ability to run or halt the target program at specific points, display the contents of memory, CPU registers or storage devices, and modify memory or register contents in order to enter selected test data that might be a cause of faulty program execution.

A web service (WS) is either:

The Protein Data Bank (PDB) is a database for the three-dimensional structural data of large biological molecules, such as proteins and nucleic acids. The data, typically obtained by X-ray crystallography, NMR spectroscopy, or, increasingly, cryo-electron microscopy, and submitted by biologists and biochemists from around the world, are freely accessible on the Internet via the websites of its member organisations. The PDB is overseen by an organization called the Worldwide Protein Data Bank, wwPDB.

<span class="mw-page-title-main">National Center for Biotechnology Information</span> Database branch of the US National Library of Medicine

The National Center for Biotechnology Information (NCBI) is part of the United States National Library of Medicine (NLM), a branch of the National Institutes of Health (NIH). It is approved and funded by the government of the United States. The NCBI is located in Bethesda, Maryland, and was founded in 1988 through legislation sponsored by US Congressman Claude Pepper.

<span class="mw-page-title-main">Computer-aided manufacturing</span> Use of software to control industrial processes

Computer-aided manufacturing (CAM) also known as computer-aided modeling or computer-aided machining is the use of software to control machine tools in the manufacturing of work pieces. This is not the only definition for CAM, but it is the most common. It may also refer to the use of a computer to assist in all operations of a manufacturing plant, including planning, management, transportation and storage. Its primary purpose is to create a faster production process and components and tooling with more precise dimensions and material consistency, which in some cases, uses only the required amount of raw material, while simultaneously reducing energy consumption. CAM is now a system used in schools and lower educational purposes. CAM is a subsequent computer-aided process after computer-aided design (CAD) and sometimes computer-aided engineering (CAE), as the model generated in CAD and verified in CAE can be input into CAM software, which then controls the machine tool. CAM is used in many schools alongside CAD to create objects.

TradeStation Group, Inc. is the parent company of online securities and futures brokerage firms and trading technology companies. It is headquartered in Plantation, Florida, and has offices in New York; Chicago; Richardson, Texas; London; Sydney; and Costa Rica. TradeStation is best known for the technical analysis software and electronic trading platform it provides to active traders and certain institutional trader markets. TradeStation Group was a Nasdaq GS-listed company from 1997 to 2011, until it was acquired by Monex Group, a Tokyo Stock Exchange-listed parent company of one of Japan's leading online securities brokerage firms.

<span class="mw-page-title-main">Dextre</span> Robotic Arm

Dextre, also known as the Special Purpose Dexterous Manipulator (SPDM), is a two-armed robot, or telemanipulator, which is part of the Mobile Servicing System on the International Space Station (ISS), and does repairs that would otherwise require astronauts to do spacewalks. It was launched on March 11, 2008, on the mission STS-123.

<span class="mw-page-title-main">Japanese Paleolithic</span> Period of human inhabitation in Japan predating the development of pottery

The Japanese Paleolithic period is the period of human inhabitation in Japan predating the development of pottery, generally before 10,000 BC. The starting dates commonly given to this period are from around 40,000 BC; although any date of human presence before 35,000 BC is controversial, with artifacts supporting a pre-35,000 BC human presence on the archipelago being of questionable authenticity. The period extended to the beginning of the Mesolithic Jōmon period, or around 14,000 BC.

<span class="mw-page-title-main">Brother Industries</span> Japanese multinational electronics and electrical equipment company

Brother Industries, Ltd. (stylized in lowercase) is a Japanese multinational electronics and electrical equipment company headquartered in Nagoya, Japan. Its products include printers, multifunction printers, desktop computers, consumer and industrial sewing machines, large machine tools, label printers, typewriters, fax machines, and other computer-related electronics. Brother distributes its products both under its own name and under OEM agreements with other companies.

The Gene Ontology (GO) is a major bioinformatics initiative to unify the representation of gene and gene product attributes across all species. More specifically, the project aims to: 1) maintain and develop its controlled vocabulary of gene and gene product attributes; 2) annotate genes and gene products, and assimilate and disseminate annotation data; and 3) provide tools for easy access to all aspects of the data provided by the project, and to enable functional interpretation of experimental data using the GO, for example via enrichment analysis. GO is part of a larger classification effort, the Open Biomedical Ontologies, being one of the Initial Candidate Members of the OBO Foundry.

In computer science, stream processing is a programming paradigm which views streams, or sequences of events in time, as the central input and output objects of computation. Stream processing encompasses dataflow programming, reactive programming, and distributed data processing. Stream processing systems aim to expose parallel processing for data streams and rely on streaming algorithms for efficient implementation. The software stack for these systems includes components such as programming models and query languages, for expressing computation; stream management systems, for distribution and scheduling; and hardware components for acceleration including floating-point units, graphics processing units, and field-programmable gate arrays.

<span class="mw-page-title-main">Self-service</span> Practice of serving oneself when shopping

Self-service is the practice of serving oneself, usually when making purchases. Aside from Automated Teller Machines, which are not limited to banks, and customer-operated supermarket check-out, labor-saving which has been described as self-sourcing, there is the latter's subset, selfsourcing and a related pair: End-user development and End-user computing.

<span class="mw-page-title-main">VGChartz</span> Video game sales tracking website

The VGChartz Network is a collection of five video game websites: VGChartz, gamrFeed, gamrReview, gamrTV, and gamrConnect. VGChartz sits at the center of the network and is a video game sales tracking website, providing weekly sales figures of console software and hardware by region. The site was launched in June 2005, and is owned by Brett Walton. Employing ten people, VGChartz provides tools for worldwide data analysis and regular reviews of the data it provides.

<span class="mw-page-title-main">STEP-NC</span> Machine tool control language

STEP-NC is a machine tool control language that extends the ISO 10303 STEP standards with the machining model in ISO 14649, adding geometric dimension and tolerance data for inspection, and the STEP PDM model for integration into the wider enterprise. The combined result has been standardized as ISO 10303-238.

<span class="mw-page-title-main">Okuma Corporation</span>

Okuma Corporation is a machine tool builder based in Ōguchi, Aichi Prefecture, Japan. It has global market share in CNC machine tools such as CNC lathes, machining centers, and turn-mill machining centers. The company also offers FA products and servomotors.

Tool management is needed in metalworking so that the information regarding the tools on hand can be uniformly organized and integrated. The information is stored in a database and is registered and applied using tool management. Tool data management consists of specific data fields, graphics and parameters that are essential in production, as opposed to managing general production equipment.

<span class="mw-page-title-main">THK Co., Ltd.</span> Japanese machinery components manufacturing and engineering company

THK Co., Ltd. is a Japanese company that offers machine elements and modules in the field of mechanical engineering, robotics and automation. The headquarters are in Tokyo. Since it was founded in April 1971, the company has developed into an international company. THK shares have been listed on the Tokyo Stock Exchange's first segment since 2001.

<span class="mw-page-title-main">Canon Tokki</span> Subsidiary of Canon Inc.

Canon Tokki Corporation is a Japanese manufacturer of material deposition equipment for making OLED displays. It is a wholly owned subsidiary of Canon Inc. and has a near-monopoly in its main business field.

References

  1. "Japan machine orders bounce back in July". The Financial Times . Retrieved 2024-02-04.