Mahdi Muhammad Abu-Omar (born October 18, 1970, in Jerusalem) is a Palestinian-American chemist, currently the Duncan and Suzanne Mellichamp Professor of Green Chemistry in the Departments of Chemistry & Biochemistry and Chemical Engineering at University of California, Santa Barbara. [1] [2]
Mahdi was born in Jerusalem and completed his high school education at St. George's before immigrating to the U.S. Abu-Omar received a B.S. in chemistry from Hampden-Sydney College, Virginia, in 1992. He began his scientific research in Inorganic and Organometallic Chemistry at Iowa State University, where he earned his Ph.D. in 1996 under Professor James H. Espenson. His doctoral thesis described the kinetics and mechanisms of oxygen atom transfer reactions of methyltrioxorhenium (MTO). Following that, Abu-Omar spent a year as an NIH Postdoctoral Scholar at Caltech with Professor Harry B. Gray, studying long range electron-transfer in rhenium-modified metalloproteins.
Mahdi started his independent academic career as an assistant professor at UCLA, moved to Purdue University in 2004, was appointed R. B. Wetherill Professor of Chemistry and Chemical Engineering at Purdue University in 2013, [3] and moved back to California in 2016, where he currently holds the Mellichamp Chair in green chemistry at UCSB. [4]
Abu-Omar's interdisciplinary research addresses fundamental problems in energy science, sustainability, and green chemistry at the interface of inorganic chemistry and catalysis. Much of modern life materials are based on nonrenewable petroleum. Over the past decade the Abu-Omar research group contributed to biomass conversion and bio-inspired chemistry by discovering and developing new transformations that provide access to new molecules that are precursors to renewable materials and fuels. A unifying theme for much of Abu-Omar's research is the combination of synthetic chemistry with detailed mechanistic investigations through chemical kinetics.
Abu-Omar has authored more than 150 original research articles in scientific journals, and supervised 35 Ph.D. students as well as several postdoctoral scholars. [5] Among Mahdi's research contributions are the discovery of catalytic perchlorate remediation, [6] the conversion of lignin from intact biomass to aromatic chemicals and introduction of a new biorefinery concept known as lignin-first, [7] [8] [9] discovery of rhenium-catalyzed H2-driven deoxydehydration (DODH) of biomass-derived polyols, [10] [11] the development of bio-inspired catalysts for on-demand production of chlorine dioxide in water under ambient temperature, pressure and neutral pH, [12] and development of kinetic methods for the study of olefin polymerization catalysts. [13]
Rhenium is a chemical element; it has symbol Re and atomic number 75. It is a silvery-gray, heavy, third-row transition metal in group 7 of the periodic table. With an estimated average concentration of 1 part per billion (ppb), rhenium is one of the rarest elements in the Earth's crust. It has the third-highest melting point and second-highest boiling point of any element at 5869 K. It resembles manganese and technetium chemically and is mainly obtained as a by-product of the extraction and refinement of molybdenum and copper ores. It shows in its compounds a wide variety of oxidation states ranging from −1 to +7.
Tetrahydrofuran (THF), or oxolane, is an organic compound with the formula (CH2)4O. The compound is classified as heterocyclic compound, specifically a cyclic ether. It is a colorless, water-miscible organic liquid with low viscosity. It is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent.
In organic chemistry, thioesters are organosulfur compounds with the molecular structure R−C(=O)−S−R’. They are analogous to carboxylate esters with the sulfur in the thioester replacing oxygen in the carboxylate ester, as implied by the thio- prefix. They are the product of esterification of a carboxylic acid with a thiol. In biochemistry, the best-known thioesters are derivatives of coenzyme A, e.g., acetyl-CoA. The R and R' represent organyl groups, or H in the case of R.
Group 7, numbered by IUPAC nomenclature, is a group of elements in the periodic table. It contains manganese (Mn), technetium (Tc), rhenium (Re) and bohrium (Bh). This group lies in the d-block of the periodic table, and are hence transition metals. This group is sometimes called the manganese group or manganese family after its lightest member; however, the group itself has not acquired a trivial name because it belongs to the broader grouping of the transition metals.
Humins are carbon-based macromolecular substances, that can be found in soil chemistry or as a by-product from saccharide-based biorefinery processes.
A biorefinery is a refinery that converts biomass to energy and other beneficial byproducts. The International Energy Agency Bioenergy Task 42 defined biorefining as "the sustainable processing of biomass into a spectrum of bio-based products and bioenergy ". As refineries, biorefineries can provide multiple chemicals by fractioning an initial raw material (biomass) into multiple intermediates that can be further converted into value-added products. Each refining phase is also referred to as a "cascading phase". The use of biomass as feedstock can provide a benefit by reducing the impacts on the environment, as lower pollutants emissions and reduction in the emissions of hazard products. In addition, biorefineries are intended to achieve the following goals:
Lignocellulose refers to plant dry matter (biomass), so called lignocellulosic biomass. It is the most abundantly available raw material on the Earth for the production of biofuels. It is composed of two kinds of carbohydrate polymers, cellulose and hemicellulose, and an aromatic-rich polymer called lignin. Any biomass rich in cellulose, hemicelluloses, and lignin are commonly referred to as lignocellulosic biomass. Each component has a distinct chemical behavior. Being a composite of three very different components makes the processing of lignocellulose challenging. The evolved resistance to degradation or even separation is referred to as recalcitrance. Overcoming this recalcitrance to produce useful, high value products requires a combination of heat, chemicals, enzymes, and microorganisms. These carbohydrate-containing polymers contain different sugar monomers and they are covalently bound to lignin.
Myron Lee Bender (1924–1988) was born in St. Louis, Missouri. He obtained his B.S. (1944) and his Ph.D. (1948) from Purdue University. The latter was under the direction of Henry B. Hass. After postdoctoral research under Paul D. Barlett, and Frank H. Westheimer, he spent one year as a faculty member at the University of Connecticut. Thereafter, he was a professor of Chemistry at Illinois Institute of Technology in 1951, and then at Northwestern University in 1960. He worked primarily in the study of reaction mechanisms and the biochemistry of enzyme action. Myron L. Bender demonstrated the two-step mechanism of catalysis for serine proteases, nucleophilic catalysis in ester hydrolysis and intramolecular catalysis in water. He also showed that cyclodextrin can be used to investigate catalysis of organic reactions within the scope of host–guest chemistry. Finally, he and others reported on the synthesis of an organic compound as a model of an acylchymotrypsin intermediate.
Organorhenium chemistry describes the compounds with Re−C bonds. Because rhenium is a rare element, relatively few applications exist, but the area has been a rich source of concepts and a few useful catalysts.
A transition metal oxo complex is a coordination complex containing an oxo ligand. Formally O2-, an oxo ligand can be bound to one or more metal centers, i.e. it can exist as a terminal or (most commonly) as bridging ligands (Fig. 1). Oxo ligands stabilize high oxidation states of a metal. They are also found in several metalloproteins, for example in molybdenum cofactors and in many iron-containing enzymes. One of the earliest synthetic compounds to incorporate an oxo ligand is potassium ferrate (K2FeO4), which was likely prepared by Georg E. Stahl in 1702.
Hydrothermal liquefaction (HTL) is a thermal depolymerization process used to convert wet biomass, and other macromolecules, into crude-like oil under moderate temperature and high pressure. The crude-like oil has high energy density with a lower heating value of 33.8-36.9 MJ/kg and 5-20 wt% oxygen and renewable chemicals. The process has also been called hydrous pyrolysis.
Rakesh Agrawal is a chemical engineer known for contributions to separations, cryogenic gas separation and liquefaction, and for contributions to renewable energy including the conversion of biomass to chemicals and fuels, inorganic solar cell fabrication, and the synergistic use of solar energy. He is the Winthrop E. Stone Distinguished Professor of Chemical Engineering at Purdue University in West Lafayette, Indiana.
Jonathan Wilker is an American scientist, engineer, and educator who focuses on developing marine animal-inspired underwater adhesives for use in surgery, construction, and other applications. His work has been profiled by The New York Times, National Public Radio, Popular Science, and his research findings appear in many scientific journals, such as Nature, Journal of the American Chemical Society, and ACS Applied Materials & Interfaces. He is a professor at Purdue University in West Lafayette, Indiana, where he teaches courses in inorganic chemistry and bioinorganic chemistry. Wilker has received a number of awards for his teaching including The College of Science Outstanding Teacher Award at Purdue University (2011). In addition to being in the Department of Chemistry, he is also a Professor of Materials Engineering at Purdue University. Outside activities include advocacy for federal funding of science research and development.
Abhik Ghosh is an Indian inorganic chemist and materials scientist and a professor of chemistry at UiT – The Arctic University of Norway in Tromsø, Norway.
R. Tom Baker is an inorganic chemist known for the development and application of inorganic transition metal-based catalysis.
Deoxydehydration (DODH) is a chemical reaction for removing two adjacent hydroxyl groups in a vicinal diol to form an alkene. In contrast to hydrodeoxygenation which uses hydrogen as a reductant, deoxydehydration is able to use a variety of other reductants such as alcohols and organic phosphines. In research, the most common homogeneous catalysts for this reaction use rhenium.
Paul Dauenhauer, a chemical engineer and MacArthur Fellow, is the Lanny & Charlotte Schmidt Professor at the University of Minnesota (UMN). He is recognized for his research in catalysis science and engineering, especially, his contributions to the understanding of the catalytic breakdown of cellulose to renewable chemicals, the invention of oleo-furan surfactants, and the development of catalytic resonance theory and programmable catalysts.
Jonas C. Peters is the Bren Professor of Chemistry at the California Institute of Technology and Director of the Resnick Sustainability Institute. He has contributed to the development of catalysts and photocatalysts relevant to small molecule activation.
Hilkka Inkeri Kenttämaa is a researcher in organic and bioorganic mass spectrometry, and the Frank Brown Endowed Distinguished Professor of Chemistry at Purdue University. She is a pioneer in distonic radical cation research and laser-induced acoustic desorption.
Rhenium compounds are compounds formed by the transition metal rhenium (Re). Rhenium can form in many oxidation states, and compounds are known for every oxidation state from -3 to +7 except -2, although the oxidation states +7, +4, and +3 are the most common. Rhenium is most available commercially as salts of perrhenate, including sodium and ammonium perrhenates. These are white, water-soluble compounds. The tetrathioperrhenate anion [ReS4]− is possible.