Mata Hari (pinball)

Last updated
Mata Hari
Mata Hari pinball flyer.jpg
Manufacturer Bally Manufacturing
Release dateApril, 1978
DesignJim Patla
ArtworkDave Christensen
Production run16,260

Mata Hari is a pinball machine created by Bally Manufacturing in 1977 and released in 1978. The theme of the game is based on Dutch exotic dancer, Mata Hari. [1] It was mainly produced using solid-state electronics but also 170 electro-mechanical versions were released. [2] It was the last model manufactured by Bally in two such versions. [3] Approximately 20 sample games were produced with a plastic playfield, instead of the traditional wooden playfield. [4]

Contents

Description

The design noticeably consists of mainly dark, red and gold color artwork and a prominent image of a dagger running up the middle. [3] [5] A dagger is also depicted on the backglass in the hand of Mata Hari. One version is blank and one shows an inscription with the motto of the Nazi German SS "Meine Ehre heißt Treue" (German, "My honor is loyalty"). Mata Hari died during World War I therefore the inscription is an anachronism. [4] Contrary to a popular belief, the version with inscription is not more rare than the one without. There were about equal numbers of both versions of backglasses made. [6]

The game has chimes as it was designed before electronic sounds were used. [6] The table features two flippers, four pop bumpers, two slingshots, two four-bank drop targets and one kick-out hole. [7] The machines makes use of a MPU 2518-17 circuit and an AS2518-18 power supply. [3]

Gameplay

The game allows up to four players. [8] The table has a completely symmetric playfield layout. The machine has a simple straight-forward rule set that offers a challenge to beginners and advanced players. [5] Basically, there are three goals to accomplish: knock down the drop targets, complete the A-B combination a certain number of times and land in the kickout hole multiple times. [6] The rules in detail are the following: Making ‘A’ and ‘B’ top rollover lanes or left and right ‘A’ and ‘B’ orbits scores and advances ‘A-B’ lit value which is displayed in the centre of the playfield. Landing the ball in the top kickout hole first time scores 3K points, advances bonus value 3 places, lights 2x bonus multiplier and lights left outlane for 50K points. Second time lights right outlane for 50K points and 3x bonus multiplier. Third time lights 5x bonus multiplier. Knocking down all drop targets scores 50K points and lights target special light. [2] A replay is available for making ‘A’ and ‘B’ when lit for special and another +50K for all target down when lit for special. There is a limit of one extra ball per ball in play, with mystery scores collected for each one earned hereafter. [8]

Related Research Articles

<span class="mw-page-title-main">Pinball</span> Arcade entertainment machine

Pinball games are a family of games in which a ball is propelled into a specially designed table where it bounces off various obstacles, scoring points either en route or when it comes to rest. Historically the board was studded with nails called 'pins' and had hollows or pockets which scored points if the ball came to rest in them. Today, pinball is most commonly an arcade game in which the ball is fired into a specially designed cabinet known as a pinball machine, hitting various lights, bumpers, ramps, and other targets depending on its design. The game's object is generally to score as many points as possible by hitting these targets and making various shots with flippers before the ball is lost. Most pinball machines use one ball per turn, and the game ends when the ball(s) from the last turn are lost. The biggest pinball machine manufacturers historically include Bally Manufacturing, Gottlieb, Williams Electronics and Stern Pinball.

A glossary of terms, commonly used in discussing pinball machines.

<i>The Addams Family</i> (pinball) Pinball machine adaptation of the 1991 film of the same name

The Addams Family is a pinball machine released in March 1992. It was designed by Pat Lawlor and Larry DeMar and released by Midway. It was based on the 1991 film of the same name, and features custom speech by the stars of the film, Anjelica Huston and Raul Julia. It is the best-selling solid state pinball machine of all time with 20,270 units sold.

<i>Star Trek: The Next Generation</i> (pinball) 1993 pinball machine

Star Trek: The Next Generation is a widebody pinball game, designed by Steve Ritchie and released in November 1993 by Williams Electronics. It was part of WMS' SuperPin series, and was based on the TV series. It is the only pinball machine that features three separate highscore-lists. Apart from the regular highscore-list and the buy-in-list, it also features a reminiscence to The Machine: Bride of Pin*Bot billionaires club. It is also the third pinball game overall based on the Star Trek franchise, following the 1979 pinball game by Bally, and the 1991 game by Data East, and preceding the 2013 pinball game by Stern.

<i>Twilight Zone</i> (pinball) 1993 pinball machine

Twilight Zone is a widebody pinball machine, designed by Pat Lawlor and based on the TV series of the same name. It was first released in 1993 by Midway. This game is part of WMS' SuperPin line of widebody games alongside Star Trek: The Next Generation and Indiana Jones: The Pinball Adventure.

<i>High Speed</i> (pinball) 1986 pinball machine

High Speed is a pinball game designed by Steve Ritchie and released by Williams Electronics in 1986. It is based on Ritchie's real-life police chase inside a 1979 Porsche 928. He was finally caught in Lodi, California on Interstate 5 and accused of speeding at 146 miles per hour (235 km/h).

<i>Indiana Jones: The Pinball Adventure</i> 1993 pinball machine

Indiana Jones: The Pinball Adventure is a 1993 widebody pinball game designed by Mark Ritchie and released by Williams. It was based on the Indiana Jones movies. It was also part of WMS' SuperPin series of widebody games.

<i>Bad Cats</i> 1989 pinball machine

Bad Cats is a pinball machine released in November 1989 by Williams. It was designed by Barry Oursler and Python Anghelo.

Doctor Who is a pinball machine designed by Bill Pfutzenreuter (Pfutz) and Barry Oursler, and released by Midway in September 1992. It is based on the television series Doctor Who. As stated in the Gameplay section, the rulesheet is rather different from other pinball machines released at the time, which didn't help popularity as casual players did not understand the complex rule changes that occur during the game.

<i>Jack-Bot</i> 1995 pinball game

Jack-Bot is a 1995 pinball game which was designed by Barry Oursler and Larry DeMar, and released by Williams. It is the third game in the Pin-Bot series, following Pin-Bot (1986) and The Machine: Bride of Pin-Bot (1991).

<i>Who Dunnit</i> Midway pinball machine

Who Dunnit is a Midway pinball machine with a 1940s style and a murder mystery theme. The playfield features up to five different murder mysteries by revealing clues by sending the ball to an elevator, phone, or slot machine. The machine accepts up to four players, and features four-ball play.

<i>Pin Bot</i> (video game) 1990 video game

Pin Bot is a pinball video game developed by Rare and published by Nintendo for the Nintendo Entertainment System. It was released in North America in April 1990. It is a conversion of the pinball machine by the same name. The NES version of the game accurately reproduces some of the game-play and aesthetics of the pinball machine, while introducing new features and added challenges.

<i>Space Shuttle</i> (pinball) 1984 pinball machine

Space Shuttle is a Space Shuttle themed pinball machine designed by Barry Oursler and Joe Kaminkow and produced in 1984 by Williams Electronics. The machine's marketing slogan is "The fastest way to make your earnings really take off!". It is notable for its central ramp shot up a feature themed after the Space Shuttle. A sequel, Space Station: Pinball Rendezvous, was released in 1987.

Police Force is a 1989 Williams pinball machine. The pinball machine was initially supposed to be released as Batman pinball, the police car was to be the Batmobile and the Jail was to be the Bat Cave. The machine features anthropomorphic jungle animals in the roles of police and robbers.

<i>Big Shot</i> (pinball) Pinball machine

Big Shot is a pinball machine designed by Ed Krynski and produced by Gottlieb in 1973. It was created as a two-player version of their 1973 game, Hot Shot. The table has a pool theme and is highly regarded among skilled players and collectors due to the level of skill required to hit all 14 drop targets in the game. A total of 2,900 units were manufactured.

<i>Comet</i> (pinball) 1985 pinball machine

Comet is a pinball machine released by Williams in June 1985. It was designed by Barry Oursler, who was inspired by the Comet roller coaster at Riverview Park in Chicago, and was the first in an amusement park themed pinball trilogy followed by Cyclone in 1988 and Hurricane in 1991.

<i>Harley-Davidson</i> (Bally pinball) 1991 pinball machine

Harley-Davidson was a pinball machine arcade game manufactured by Midway and released under the Bally label in February 1991. Barry Oursler and Mark Sprenger designed the pinball game utilizing the Williams Pinball Controller arcade system board platform. This was the first pinball game sold under the Bally label to use the Williams WPC system and their last to use an Alphanumeric Display.

<i>Genie</i> (pinball) Pinball machine

Genie is a widebody pinball machine designed by Ed Krynski and released in 1979 by Gottlieb. It features a jinn theme and was advertised with the slogans "Gottlieb's WIDE and Beautiful BODY" and "A Wide-Body Pinball absolutely bulging with player appeal and proven massive profit earning capacity!".

<i>Hurricane</i> (pinball) 1991 pinball machine

Hurricane is a pinball machine released by Williams Electronics in August 1991. It was designed by Barry Oursler as the third game in Oursler's amusement park themed pinball trilogy. The first being Comet, released in 1985, and the second being Cyclone, released in 1988.

Bugs Bunny's Birthday Ball is a 1990 pinball game designed by John Trudeau and Python Anghelo and released by Midway. It is based on Warner Bros.' Looney Tunes and Merrie Melodies series of cartoons. This is the first of only two licensed pinball tables ever to feature the Looney Tunes characters.

References

  1. ↑ Shalhoub, Michael. The Pinball Compendium: 1970 to 1981. Schiffer Publishing, Limited. p. 123. ISBN   978-0764320743.
  2. 1 2 Rossignoli, Marco. The Complete Pinball Book: Collecting the Game and Its History. Schiffer Publishing, Limited. p. 91. ISBN   9780764337857.
  3. 1 2 3 "Bally Mata Hari". Home.arcor.de. Archived from the original on 2016-03-04. Retrieved 2016-03-30.
  4. 1 2 "Internet Pinball Machine Database: Data East 'Matar Hari'" . Retrieved 27 June 2014.
  5. 1 2 [ dead link ]
  6. 1 2 3 "Pinball Restoration: Mata Hari". Thepinballfix.com. Retrieved 2016-03-30.
  7. ↑ "Mata Hari". Stevechannel.com. Retrieved 2016-03-30.
  8. 1 2 "Locator - Pinball New York City". Pinballnyc.com. Retrieved 2016-03-30.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.