HM-3 submachine gun | |
---|---|
Type | Submachine gun |
Place of origin | Mexico |
Service history | |
In service | 2011–present |
Used by | Mexico [1] |
Wars | Mexican Drug War |
Production history | |
Designer | Héctor Mendoza |
Designed | 1990s |
Manufacturer | Productos Mendoza |
No. built | 1,500 (2012) |
Variants | HM-3, HM-4, HM-3 Short, HM-3 Long, HM-3 Mini (Bulldog) |
Specifications |
The HM-3 is a submachine gun of Mexican origin chambered in the 9mm calibre and, since 2011, in .380 ACP caliber for private security forces.
This sub-machine gun is manufactured by Productos Mendoza, S.A. in Mexico. It is a lightweight weapon of reduced overall length achieved by largely extending the wrap around bolt forward around the barrel. A grip safety is provided to prevent accidental discharge. The stock is designed in a manner that makes folding and unfolding easy and provides a foregrip when the stock is folded. The selector lever is on the right-hand side of the weapon so that it can be operated by the right hand without releasing the weapon with either hand. The stock can be folded or unfolded while gripping the weapon with both hands unlike the previous models of the same gun and the magazine is located on the grip. [2]
There are currently three variations on the HM-3 using a 9mm caliber round. The HM-3-S LONG is a 15.74 in (23.85 in with extended stock) long model, used primarily for the Mexican Police and other State and Municipal security forces. The HM-3-S SHORT is almost identical, with the exception that the barrel is shortened and therefore measures only 12.99 in (21.06 in with extended stock). The HM-3-S BULLDOG (also called HM-3-S Mini) is a miniature version of the weapon, especially designed to be carried by motorcycle police and bodyguards, and measures only 10.8 in (19.3 in with extended stock) in length and weighs 2,827 g (6.2 lbs) with a full 32-round magazine. All versions may use 20 or 32-round magazines. [3]
Since 2011, Productos Mendoza has manufactured a variation of the HM-3-S that shoots a .380 ACP caliber round. This is the largest caliber available to use by private security companies and individuals in Mexico, and the most popular caliber for personal defence in Latin America. The HM-3-S LONG model is called "COBRA .380" and the HM-3-S BULLDOG is called "BULLDOG .380". These names were created to facilitate the models' introduction to the consumer market. All specs are the same (excluding caliber) than the HM-3-S 9mm models, with the exception that .380 models can carry a 35-round magazine.
Model | Cartridge | Empty weight | Loaded weight | Length with folded stock | Length with extended stock | Barrel length | Magazine |
---|---|---|---|---|---|---|---|
Mendoza HM-3 | 9 mm Luger | 2,700 g (5 lb 15 Oz) | 3,380 g (7 lb 7 Oz) | 400 mm (15.75 in) | 635 mm (25 in) | 225 mm (8.9 in) | 32 rounds |
Mendoza HM-3-S Largo | 9 mm Luger | 2,620 g (5 lb 12 Oz) | 3,300 g (7 lb 4 Oz) | 400 mm (15.75 in) | 606 mm (23.9 in) | 255 mm (10 in) | 20 or 32 rounds |
Mendoza HM-3-S Corto | 9 mm Luger | 2,370 g (5 lb 4 Oz) | 2,841 g (6 lb 4 Oz) | 330 mm (13 in) | 535 mm (21 in) | 210 mm (8.2 in) | 20 or 32 rounds |
Mendoza Cobra 380 | .380 ACP | 2,769 g (6 lb 2 Oz) | 3,451 g (7 lb 10 Oz) | 400 mm (15.75 in) | 606 mm (23.9 in) | 255 mm (10 in) | 20 or 32 rounds |
Mendoza Bulldog 380 | .380 ACP | 2,352 g (5 lb 9 Oz) | 2,827 g (6 lb 4 Oz) | 275 mm (10.8 in) | 490 mm (19.2 in) | 153 mm (6 in) | 20 or 32 rounds |
A machine pistol is an autoloading pistol capable of fully automatic fire, including stockless handgun-style submachine guns.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel "Uzi" Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.
The Military Armament Corporation Model 10, officially abbreviated as "M10" or "M-10", and more commonly known as the MAC-10, is a compact, blowback operated machine pistol/submachine gun that was developed by Gordon B. Ingram in 1964. It is chambered in either .45 ACP or 9mm. A two-stage suppressor by Sionics was designed for the MAC-10, which not only abates the noise created but makes it easier to control on full automatic.
The .45 ACP, also known as .45 Auto, .45 Automatic, or 11.43×23mm is a rimless straight-walled handgun cartridge designed by John Moses Browning in 1904, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt's M1911 pistol. The round was developed due to a lack of stopping power experienced in the Moro Rebellion in places like Sulu. The issued ammunition, .38 Long Colt, had proved inadequate, motivating the search for a better cartridge. This experience and the Thompson–LaGarde Tests of 1904 led the Army and the Cavalry to decide that a minimum of .45 caliber was required in a new handgun cartridge.
The .380 ACP, is a rimless, straight-walled pistol cartridge developed by firearms designer John Moses Browning. The cartridge headspaces on the mouth of the case. It was introduced in 1908 by Colt, for use in its new Colt Model 1908 pocket hammerless semi-automatic, and has been a popular self-defense cartridge ever since, seeing wide use in numerous handguns. Other names for .380 ACP include .380 Auto, 9×17mm, 9mm Browning, 9mm Corto, 9mm Kurz, 9mm Short, and 9mm Browning Court. It should not be confused with .38 ACP. The .380 ACP does not strictly conform to cartridge naming conventions, named after the diameter of the bullet, as the actual bullet diameter of the .380 ACP is .355 inches.
The PP-19 Bizon is a 9×18mm Makarov submachine gun developed in 1993 by the Russian company Izhmash. The Bizon was designed by a team of engineers headed by Victor Kalashnikov and including Alexei Dragunov.
The Škorpion vz. 61 is a Czechoslovak machine pistol developed in 1959 by Miroslav Rybář (1924–1970) and produced under the official designation Samopal vzor 61 by the Česká zbrojovka arms factory in Uherský Brod from 1963 to 1979. The standard version uses .32 ACP ammunition.
The PM-63 RAK is a Polish 9×18mm submachine gun, designed by Piotr Wilniewczyc in cooperation with Tadeusz Bednarski, Grzegorz Czubak and Marian Wakalski. The RAK combines the characteristics of a self-loading pistol and a fully automatic submachine gun.
The Hi-Point carbine is a series of pistol-caliber carbines manufactured by Hi-Point Firearms chambered, for 9×19mm Parabellum, .40 S&W, 10mm Auto, .45 ACP, .380 ACP and .30 Super Carry handgun cartridges. They are inexpensive as they are constructed using polymers and alloyed metals resulting in a reduction of production costs and sale price. It functions via a simple direct blowback action.
Star Bonifacio Echeverria, S.A. was a manufacturer of small arms in the Basque region of Spain from about 1905 until 1997.
The FIC Mk. 9 is a sub-machine gun designed by a private venture of Floro International Corporation (FIC) based in Tanay, Rizal Province in the Philippines. The weapon is marketed to local security forces as a low-cost alternative to imported submachine guns and is currently in limited use by the Philippines Marines and the Philippines Navy.
The Frommer Stop is a Hungarian long-recoil, rotating bolt pistol manufactured by Fémáru, Fegyver és Gépgyár (FÉG) in Budapest. It was designed by Rudolf Frommer, and its original design was adopted as the Pisztoly 12M in 1912, created for the Royal Hungarian Army. The handgun was manufactured in various forms from 1912 to 1945 and used in the Hungarian Armed Forces as well as, during the First World War, by the Ottoman Army in limited quantities. The Stop is 165 millimeters (6.5 in) long with a 95 millimeters (3.7 in) 4-groove rifled barrel. Unloaded weight is 610 g (22 oz), and the detachable box magazine holds seven rounds.
The Mendoza RM2 was a light machine gun similar to the M1918 BAR manufactured in Mexico by Productos Mendoza, S.A. Rafael Mendoza have been producing machine guns for the Mexican Army since 1933 and all have been noted for their lightness, simplicity, ease of maintenance, and economic construction without sacrificing reliability.
The KRISS Vector is a series of weapons based upon the parent submachine gun design developed by the American company KRISS USA, formerly Transformational Defense Industries (TDI).
Llama Firearms, officially known as Llama-Gabilondo y Cia SA, was a Spanish arms company founded in 1904 under the name Gabilondo and Urresti. Its headquarters were in Eibar in the Basque Country, Spain, but they also had workshops during different times in Elgoibar and Vitoria. The company manufactured moderate-priced revolvers and self-chambering pistols in a wide variety of models. These were popular mainly in the European and Latin American export market, as well as domestically in Spain.
The Taurus Millennium series is a product line of double-action only (DAO) and single-action/double-action hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Forjas Taurus S/A in Porto Alegre Brazil. The Millennium line was designed to contend in the civilian concealed carry firearms market, and to be sold as backup weapons for law enforcement officers.
The Astra modelo 400 was a Spanish service pistol produced by weapons manufacturer Astra-Unceta y Cia SA. as a replacement for the Campo-Giro 1913/1916, which had also been chambered in 9mm Largo. It was the standard issue sidearm in the Spanish Army during the Spanish Civil War and also saw service in Germany during World War II.
Productos Mendoza, S.A., is a manufacturer of both air guns and conventional firearms, based in Mexico. It was founded in 1911 by Rafael Mendoza Blanco. Initially, Productos Mendoza manufactured firearms for troops under General Francisco Villa during the Mexican Revolution. It currently manufactures the HM-3 9mm caliber submachine-gun, which is used by police and security forces within Mexico, as well as the PUMA, a semi-automatic rifle chambered for the .22 long rifle cartridge.
Mendoza PM-1 is a series of handguns that includes two models of pistols manufactured in Mexico by Productos Mendoza: The MXIK in .380 ACP caliber and the AZTK in 9mm caliber.