Merwin, Hulbert, and Co. or Merwin Hulbert was an American firearms designer and marketer based in New York City which produced revolvers and rifles from 1874 to 1896. The firearms were manufactured by a subsidiary company, Hopkins & Allen of Norwich, Connecticut. [1] Merwin Hulbert's designs had influenced other gunmakers of the time, such as Meriden Firearms Co., Harrington & Richardson, Forehand & Wadsworth, and Iver Johnson. [2]
During the late 19th century, Merwin Hulbert revolvers were used by police departments of many cities in the eastern United States. [3]
Joseph Merwin was involved with marketing and manufacturing revolvers as early as 1856 when he formed an arms company known as Merwin & Bray. This company folded after the end of the Civil War. In 1868 Merwin formed a partnership with William and Milan Hulbert, who owned 50% interest in Hopkins & Allen. Merwin and Hulbert not only designed firearms, but imported firearms and retailed firearms and other goods in a large sporting goods endeavor. Merwin and Hulbert additionally purchased several firearms manufacturers. Author Art Phelps opined that if Merwin and Hulbert had not marked the revolvers with the manufacturers name 'Hopkins and Allen' (known for inexpensive and poor quality weapons), the Merwin Hulbert would be as well known as Colt, Smith & Wesson, and Remington. [4]
The company made numerous innovative designs such as folding hammers on their revolvers for pocket carry and a unique takedown system but was plagued by financial missteps. Payment for three sizable shipments to Russia were never realized. The bankruptcy of subsidiary Evans Rifle Company cost Merwin and Hulbert $100,000. A company associate stole the firm's operating capital and disappeared. During 1880–1881, Merwin and Hulbert was in receivership, but it was able to recover. [4]
After Merwin's death in 1888, the company became known as "Hulbert Brothers & Company". Hulbert Brothers declared bankruptcy in 1894 and in 1896 it was liquidated. Hopkins & Allen continued to manufacture Merwin Hulbert style rifles, primarily .22 and .32 caliber single shots, until 1916 when it went bankrupt and was bought the following year by Marlin Firearms. [3]
The company developed a nickel plating process superior to their competitors, which was even less expensive than providing bluing. The nickel acted to protect the metal surfaces from corrosion. Because nickel-plated Merwin and Hulbert pistols had the same cost as those without, it is rare to find Merwin and Hulbert revolvers with a blued finish.
A key innovation was a rotating barrel design which allowed the user to rotate the barrel 90 degrees in order to pull the barrel and cylinder forward to remove the fired cartridge cases. [5] [6] During the twisting motion, the empty case could be extracted. Any intact cartridge would remain in the chamber due to the additional length of the bullet. The tight machining tolerances would create a vacuum when the barrel and cylinder were pulled forward, literally causing the assembly to 'snap back' closed when released. In addition to this unique case extraction system, pressing an additional lever control when the frame was 'open' for extraction allowed the owner to completely remove the barrel. Note: early models also required pushing out a barrel wedge similar in function to Colt percussion revolvers. This not only facilitated cleaning, but allowed the owner to swap barrels, allowing for a shorter 'concealed carry' and longer 'field' weapon in one. The combination of extraction and barrel removal required very precise manufacturing tolerances—incredible considering the tools of the day.
According to Arthur Corbin Gould, Merwin Hulbert revolvers were considered to be the strongest revolvers made during the late 19th century. [7]
In 2010, it was announced that the name of the company had been purchased, as well as all of the designs and patents, by gun maker Michael Blank. Blank plans to reintroduce the revolvers made on modern machinery with modern materials. [8] In 2012, the revived Merwin Hulbert company was bought by Sharps Rifle Company, Inc. Potential buyers were encouraged to send in deposits; however, none of those potential buyers ever received a firearm. Broadsword Group, the purchaser of Sharps Rifle Company, announced on their website their commitment to return deposits of those who pre-ordered and the discontinuation of any further involvement in the production of Merwin Hulbert revolvers; although, they did indicate they are seeking to sell the design to a company that already specializes in reproduction firearms.
The more prolific models all shared the same extraction system and breakdown system. Note the 'family resemblance' in the posted image. Merwin & Hulbert manufactured both single-action and double-action revolvers in three frame sizes - the Frontier/Pocket Army, the Pocket, and the Small Pocket. The Frontier frame was built around two design features - six shots and .44 caliber. Merwin Hulbert created this family to directly compete with the Colt Model 1873 Single-Action Army (aka Peacemaker), Remington Model 1875, and Smith & Wesson Model 3 as a large frame, big bore six-shooter. Though contracts with the US Army Ordnance Department were not forthcoming, significant sales were made to Russia. The pocket model was designed for a five-shot cylinder in .38 caliber. Finally, there is the 'small frame' pocket, a late addition to the lineup based around a five-shot, .32 caliber capability.
The outlier is the 'Baby Merwin', which shared none of the design features described. It was a seven-shot .22 rimfire revolver which is nearly identical to the Smith & Wesson Model 1.
Beginning in 1876, the Frontier was produced in four variations. All featured what is now considered a "conventional" trigger and guard. Most were produced in a nickel finish. The Frontier was distinguished from the Pocket Army by sporting the familiar "saw handle" grip.
1st Model – The first model is single-action, identified by its "open top" design (no top strap over the cylinder), "scoop" flutes on the cylinder, and a barrel wedge to engage the enclosed cylinder pin. Standard barrel was 7 inches, including an integral front sight. Most were manufactured with hard rubber grips—though wood, pearl or ivory could be had for additional cost. The first caliber offered was the proprietary .44 Merwin & Hulbert (.44-30), which resembles the S&W .44 American, but is longer overall. Eyeing the lucrative contracts the Smith & Wesson enjoyed with Imperial Russia, this model was later produced in .44 Russian. [4] Production began in 1876, and likely ended in or around 1878 with the introduction of the 2nd model.
2nd Model – Very similar to the 1st Model, the second model sported a shortened cylinder locking bolt. This eliminated the need for internal access via a side plate, which was eliminated. The trigger guard was made longer and deeper. Hunting for U.S. government contracts, there was the addition of a detent pin in the barrel release lever, which was recommended by the U.S. Ordnance Department. The introduction of the .44-40 Winchester caliber (aka Winchester 1873) was an attempt to capture the market of those who preferred the same cartridge for rifle and revolver, acknowledging the popularity of the Winchester rifles of the day. The revolvers in this caliber were engraved with "Calibre Winchester 1873". The .44-40 became by far the most popular caliber for the Frontier throughout the remainder of the series. Production of the 2nd model lasted from 1878 to 1882. [4]
3rd Model – Retaining the general look of its predecessors, the 3rd model had significant changes. The first was the addition of a top strap over the cylinder, which added to the strength of the design. The same mechanism for extracting cartridges was retained. The barrel wedge was eliminated as an unnecessary feature. The scoop flutes were replaced with the more common 3⁄4 length flutes for a slight weight savings. The 3rd model could be had in either single-action or double-action. A folding hammer spur was available for those who wished to avoid snagging clothing while drawing the weapon. One could purchase a 3rd model Frontier with a shorter 5 inch barrel if desired. The 3rd model was produced between 1883 and 1887. [4]
4th Model – The fourth and final model of Frontier began production in 1887. The primary changes from the 3rd model was the addition of a rib atop the barrel. For the first time, the front sight was a separate component from the barrel, held by a retaining pin. Also for the first time, the Frontier was offered with barrel lengths of 3+1⁄2 or 5+1⁄2 inches in addition to the "traditional" 7 inch length. Multiple barrels could be purchased and easily swapped out by the owner without tools. [4]
The Pocket Army had three variants starting with the '2nd Model'. Author Art Phelps established the nomenclature for the Merwin and Hulbert revolver variants, and since the features of the 1st Pocket Army closely aligned to the '2nd Model' Frontier, '2nd Model Pocket Army' was used. This has since become the accepted convention. The Pocket Army featured six-shot cylinders like the Frontier model, and was produced in .44 M&H, .44 Russian, and by far the most popular: .44-40 Winchester caliber. [4] The primary distinction between the Pocket Army and the Frontier is that the Pocket Army sports a 'bird's head' grip, similar in contour to the famous Bisley target grips found on some Colt models. The innovation here is an exposed metal from that includes an integral lanyard loop. If in a hand-to-hand melee situation, the grip was quite an effective club. In fact, the grip was commonly referred to as the 'skull crusher'. Having handled a large frame Merwin Hulbert, the author finds no difficulty believing that this is a literal claim. Many will find it odd that a 'Pocket Army' could be had with a seven-inch barrel - hardly pocket size, even in an overcoat! The fact is that many of the Pocket Army would have been holster-carried in the field. Additionally, multiple barrels could be purchased in different lengths to allow one weapon to serve both in the field and in town.
2nd Model – With similar features to the 2nd Model Frontier, the 2nd Model Pocket Army featured an 'open top' frame. Both 3+1⁄2 inch and 7 inch barrels could be purchased, with the customer able to purchase both. Barrels were easily changed by the owner without tools, offering a 'two-guns in one' advantage over the competition, with the shorter barrel giving the owner a concealable firearm for in town, and a longer barrel for the field. Distinctive to the Pocket Army was the birds-head grip, also known as the 'skull-crusher' due to the protruding steel bottom of the grip. The 2nd Model was produced approximately 1880–1883. [4]
3rd Model – Features progressed for the 3rd Model similar to the progression of the Frontier Model, with the added top strap, 3/4 length cylinder flutes, elimination of the barrel wedge, and optional folding hammer spur. The 3rd model could be had in both single-action and double-action, and was produced between 1883 and 1887. [4]
4th Model – Also following the design cues of the Frontier, the 4th Model Pocket added a rib atop the barrel with separate sight. The 5+1⁄2 inch barrel was introduced, and the 3+1⁄2 and 7 inch barrels are rare on the 4th model. Production began in 1887. [4]
The Pocket Model was created for the urban market. Even on the frontier, it was more usual for someone to carry a pistol in a coat pocket than a holster while in town. Of course by today's standards, these 'pocket' sized pistols would be considered full size. The author owns an example with a 5-inch barrel. Apparently, pockets were quite large in the fashions of the day. The Pocket Model went through an interesting evolution of features. Barrel length was typically between 3+1⁄2 and 5+1⁄2 inches long, though a few early specimens sported a 2 3/4 inch barrel. All have the frame top strap over the cylinder for added strength.
1st Model – The first model is single-action, five-shot revolver in .38 Merwin and Hulbert (very similar to the .38 S&W cartridge). All were nickel plated, and it features a spur trigger and exposed cylinder pin. There is no loading gate, just material cut out of the frame and shield. The cylinder has scoop flutes. The grip is the familiar 'saw handle' style, typically made of hard rubber, though pearl and ivory were available for an addition cost.
2nd Model – The only change for the second model is the addition of a rearward sliding loading gate.
3rd Model – The third model has an easy to identify look different from the first two models. The cylinder pin has now been enclosed. The spur trigger is retained, making all 3rd Models single action like their predecessors. Although aesthetically pleasing, the practical reason for the design change to avoid snagging on the pocket on drawing the weapon. The 3rd Model also introduced a smaller version of the 'skull-crusher' grip as an option.
4th Model – The fourth model replaces the spur trigger with a familiar style trigger with trigger guard. The fourth model could be had in single or double action, and there was the option of a folder hammer spur. Two barrel sets are rare, but would typically consist of one each 2+3⁄4 inch and 5+1⁄2 inch barrels. A 'target' variant was sold in .32 long caliber with a seven-shot cylinder in addition to the more usual five-shot .38 M&H configuration.
For those wishing a smaller and lighter package, a smaller double-action pocket model was produced. On a smaller frame than the 'Pocket' model, this sported a five-shot cylinder in .32 M&H caliber. With features similar to the 4th Model Pocket, both single and double action were available with or without the folder hammer spur. Only the saw handle grip was available, and 3 inch was the most common barrel length. This nifty little revolver must certainly have been more comfortable for 'every day carry' than its larger brother. While some may dismiss smaller calibers, one must remember that in the day smaller calibers were feared. Typically, clothing would be somewhat dirty. As slow bullets passed through into the body, some of this clothing would be carried into the wound with any number of nasty bacteria - opening the way to infection. Combining this with the primitive, and often distant or even absent medical attention, dying from an infection was a real possibility. Consequently, the lowly .32 caliber was not dismissed as ineffective, as it is considered today.
For a period of time, Merwin and Hulbert produced a design copy of the Smith & Wesson Model 1, third issue revolver. This featured a seven-shot cylinder in .22 Short caliber with a spur trigger and the 'tip up' barrel. Following a successful design infringement lawsuit, Merwin and Hulbert were forced to pay a royalty to Smith and Wesson for each revolver previously sold. Existing stock had the Merwin and Hulbert markings obliterated and were surrendered to Smith and Wesson for disposal.
A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.
The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued revolver of the U.S. Army from 1873 to 1892.
Ethan Allen was a major American arms maker from Massachusetts. He is unrelated to the revolutionary Ethan Allen. His first firearm, the "Pocket rifle" was developed in 1836, and his first patent was granted in 1837.
Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.
In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.
The Smith & Wesson K-22 Target Masterpiece Revolver is a six-shot, double-action revolver with adjustable open sights, built on the medium-size "K" frame. When introduced, it was intended for bullseye target shooting competition of the type then most common on the United States, which is today called NRA Precision Pistol, specifically in the "smallbore" or "22" category. It is chambered for the .22 Long Rifle cartridge. It is one of three similar models that Smith & Wesson offered, the other two being intended for the "centerfire" category, the K-32 Target Masterpiece chambered for the .32 S&W Long cartridge and the K-38 Target Masterpiece chambered for the .38 Special cartridge. Most K-22 revolvers were fitted with a 6 in (150 mm) or 8+3⁄8 in (210 mm) barrel, but other lengths have been produced. First produced in 1947 and originally known as the K-22 Target Masterpiece, it was numbered the Model 17 in 1957 when all Smith & Wesson guns were given numerical model numbers. It is built on the same frame as the seminal Smith & Wesson Model 10 revolver.
North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.
The Remington-Beals Model Revolvers along with subsequent models and variations were percussion revolvers manufactured by Eliphalet Remington & Sons in .31 (Pocket) .36 (Navy) or .44 (Army) caliber, used during the American Civil War, and was the beginning of a successful line of medium and large frame pistols. They are commonly, though inaccurately, referred to as the Model 1858 due to the patent markings on its New Model barrels, "PATENTED SEPT. 14, 1858/E. REMINGTON & SONS, ILION, NEW YORK, U.S.A./NEW MODEL."; although wide scale production did not start until 1861.
A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long barreled gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.
The Smith & Wesson Model 1 was the first firearm manufactured by Smith & Wesson, with production spanning the years 1857 through 1882. It was the first commercially successful revolver to use rimfire cartridges instead of loose powder, musket ball, and percussion caps. It is a single-action, tip-up revolver holding seven .22 Short black powder cartridges.
The family of Colt Pocket Percussion Revolvers evolved from the earlier commercial revolvers marketed by the Patent Arms Manufacturing Company of Paterson, N.J. The smaller versions of Colt's first revolvers are also called "Baby Patersons" by collectors and were produced first in .28 to .31 caliber, and later in .36 caliber, by means of rebating the frame and adding a "step" to the cylinder to increase diameter. The .31 caliber carried over into Samuel Colt's second venture in the arms trade in the form of the "Baby Dragoon"-a small revolver developed in 1847–48. The "Baby Dragoon" was in parallel development with Colt's other revolvers and, by 1850, it had evolved into the "Colt's Revolving Pocket Pistol" that collectors now name "The Pocket Model of 1849". It is a smaller brother of the more famous "Colt's Revolving Belt Pistol of Naval Caliber" introduced the same year and commonly designated by collectors as the "1851 Navy Model". In 1855 Colt introduced another pocket percussion revolver, the Colt 1855 "Sidehammer", designed alongside engineer Elisha K. Root.
Dan Wesson Firearms (DW), part of CZ-USA, is an American handgun manufacturer. The corporate headquarters, customer service and manufacturing plant is located in Norwich, New York. Dan Wesson Firearms is known for its revolver expertise and for some types of ammunition it has introduced over the years.
The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 until 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver. A total of 51,210 Model 1878 revolvers were manufactured, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.
The Remington Model 1890 New Model Army was a revolver by Remington Arms. It was based on the successful Remington Model 1875 and the lesser known Model 1888 with both revolvers having the same size, appearance, and the removable cylinder. The 1890 Remington single-actions kept the solid frame and similar styling of the 1875 model, but lacking the large web under the ejector rod housing and equipped with checkered rubber grips. Like the 1875 model, the 1890 was suitably made for metallic cartridges, but only issued in .44-40 caliber.
The Smith & Wesson Model 1+1⁄2 was Smith & Wesson's second .32 caliber revolver, intended to combine the small size and convenience of the .22 caliber Model 1 with the larger caliber of the 6-shot "belt sized" Model 2, which was introduced in 1861. Chambered in .32 Rimfire, its cylinder held 5 shots. It was produced in three varieties from 1865 through 1892, with total production exceeding 223,000.
The Smith & Wesson Model 2, also referred to as the Smith & Wesson .38 Single Action, was a .38 caliber revolver produced in both single and double action by Smith & Wesson. The manufacturer's first of that caliber, its 5-shot cyclinder was chambered in .38 S&W. The single-action was produced in three varieties from 1876 through 1911, with total production exceeding 223,000 units; the double-action in three variants from 1880 to 1913, with total sales somewhat under one-million guns.
The Smith & Wesson Model No. 2 Army a.k.a. Model No. 2 Old Model Smith & Wesson Revolver was Smith & Wesson's first .32 caliber revolver, intended to combine the small size and convenience of the Smith & Wesson Model 1 .22 rimfire with a larger caliber. Chambered in the .32 rimfire long caliber, its cylinder held 6 shots. It was manufactured 1861 - 1874, with a total production of 77,020.
Remington-Beals Pocket Revolver was the first percussion revolver produced by Remington&Sons in 1857. Three successive models were produced in 1857–1860.