Remington Model 1875

Last updated
Remington Model 1875 Single Action Army
Burnham sidearm.jpg
.44-40 Remington 1875
Type Revolver
Place of originUnited States
Production history
Manufacturer Remington Arms
Produced1875–1889
Specifications
Barrel  length5 1/2 in, 7 in, 8 in (139.7 mm, 178 mm, 203 mm)

Cartridge .45 Colt
.44-40 Winchester
.44 Remington
Action Single-action
Maximum firing range55 yards (50 meters) [1]
Feed system6-shot Cylinder
SightsMilled groove in the rear of the top-strap, Front blade.

Remington Model 1875 Single Action Army (a.k.a. Improved Army or Frontier Army) [2] was a revolver by E. Remington & Sons. It was based upon the successful New Model Army (Remington Model 1858) with both revolvers having the same size, appearance, and the removable cylinder. The new 1875 Remington differed mainly from the older 1858 percussion model by having a bored through cylinder chambered for metallic cartridges. Thus, in 1875, Remington entered the cartridge revolver market with this big-frame, army style revolver, intended to compete with the Colt Peacemaker. [3] Ordinary citizens and Old West lawmen alike recognized the sturdy quality of the new Remington revolvers. [4] This design was followed by the Model 1888 and the Model 1890.

Contents

Overview

Introduced to compete with Colt's single-action Army revolvers, this Remington design failed to meet with the commercial success made by Colt's model due to the Hartford firm's two-year head start in production and sales. [5]

Also known as the "Improved Army" or "Frontier Army" revolver, this single-action was a competitor to Colt's popular Single Action Army line. By the time of its introduction, however, Colt had already secured contracts with the U.S. Army, and Remington was forced to seek other markets. The U.S. government purchased fewer than 650 for use by Indian police, and another 1,000 were sold to the Mexican government circa 1880. The Egyptian government contracted for delivery of 10,000, but few were produced and delivered due to significant unpaid debts owed by the Egyptians for rolling-block rifles. [2]

Between 25,000 and 30,000 were manufactured during the years 1875–1889 in three different chamberings: .44 Remington Centerfire; .44-40; and .45 caliber. These were not optional; rather, the caliber of production models was determined by their date of manufacture. .45 caliber cylinders were slightly longer to prevent accidental insertion into a .44 frame. Standard features included a fluted cylinder, walnut grip panels, blued or nickel-plated finish with case-hardened hammer and loading gate, and a lanyard ring. Standard barrel length was 7+12 inches (190 mm), although very few revolvers were produced with 5+34-inch (150 mm) barrels. [2]

Modern reproduction

The Uberti 1875 Outlaw, Frontier, and Police revolvers are reproductions of the famous old Remington 1875 and 1890 revolver, but chambered for more modern smokeless powder cartridges as the .357 Magnum. Cimarron Firearms offers a version built to their specifications by Uberti as well. [6] These modern reproductions have the look and feel of old-west "cowboy" guns, but have the metallurgy common to more modern revolvers. [4]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters.

<span class="mw-page-title-main">Colt Single Action Army</span> Service revolver

The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued pistol of the U.S. Army from 1873 until 1892.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

A. Uberti, Srl. is an Italian manufacturer of high quality replicas of 19th century American percussion revolvers, carbines, and rifles as well as cartridge revolvers, single-shot rifles, and lever-action rifles. These replicas are commonly used by historical re-enactors, participants in action shooting sports such as cowboy action shooting, working ranchers and target shooters who prefer traditional-style firearms. Thanks to their quality, Uberti replicas are also sought after by collectors and historical firearm enthusiasts.

<span class="mw-page-title-main">LeMat Revolver</span> Grapeshot revolver/service pistol

The Lemat revolver was a .42 or .36 caliber cap & ball black powder revolver invented by Jean Alexandre LeMat of France, which featured an unusual secondary 20 gauge smooth-bore barrel capable of firing buckshot. It saw service with the armed forces of the Confederate States of America during the American Civil War of 1861–1865 and the Army of the Government of National Defense during the Franco-Prussian War.

<span class="mw-page-title-main">William Mason (gunsmith)</span> American gunsmith (1837–1913)

William Mason was a patternmaker, engineer and inventor who worked for Remington Arms, Colt's Patent Fire Arms Manufacturing Company, and Winchester Repeating Arms Company in the 19th century.

<span class="mw-page-title-main">Smith & Wesson Model 3</span> Single-action, cartridge-firing, top-break revolver

The Smith & Wesson Model 3 is a single-action, cartridge-firing, top-break revolver produced by Smith & Wesson (S&W) from around 1870 to 1915, and was recently again offered as a reproduction by Smith & Wesson and Uberti.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Remington Model 1858</span> Revolver

The Remington-Beals Model Revolvers along with subsequent models and variations were percussion revolvers manufactured by Eliphalet Remington & Sons in .31 (Pocket) .36 (Navy) or .44 (Army) caliber, used during the American Civil War, and was the beginning of a successful line of medium and large frame pistols. They are commonly, though inaccurately, referred to as the Model 1858 due to the patent markings on its New Model barrels, "PATENTED SEPT. 14, 1858/E. REMINGTON & SONS, ILION, NEW YORK, U.S.A./NEW MODEL."; although wide scale production did not start until 1861.

<span class="mw-page-title-main">Colt Walker</span> Revolver

The Colt Walker, sometimes known as the Walker Colt, is a single-action revolver with a revolving cylinder holding six charges of black powder behind six bullets. It was designed in 1846 by American firearms inventor Samuel Colt to the specifications of Captain Samuel Hamilton Walker.

<span class="mw-page-title-main">Colt Lightning Carbine</span> Slide action Light Rifle

The Colt Lightning Carbine or Colt Lightning Rifle was a slide-action (pump-action) rifle manufactured by Colt from 1884 until 1904 and was originally chambered in .44-40 caliber. Colt eventually made the Lightning Rifle in three different frame sizes, to accommodate a wide range of cartridges, from .22 Short caliber and .38-40 to .50-95 Express. Its profile resembles the pump-action rimfire rifles made by the Winchester Repeating Arms Company and Remington Arms. The Lightning saw use as a sporting arm in America and was adopted for use by the San Francisco Police Department, but was never as popular or as reliable as the various lever-action rifles of its day.

<span class="mw-page-title-main">Ruger Old Army</span> Revolver

The Ruger Old Army is a black-powder percussion revolver introduced in 1972 by the Sturm, Ruger company and manufactured through 2008. Models were made with a 7.5" and a 5.5 inch barrel.

<span class="mw-page-title-main">Colt M1878</span> Revolver

The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 until 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver. A total of 51,210 Model 1878 revolvers were manufactured, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.

<span class="mw-page-title-main">Colt M1877</span> Revolver

The Colt M1877 was a double-action revolver manufactured by Colt's Patent Fire Arms from January 1877 until 1909 for a total of 166,849 revolvers. The Model 1877 was offered in three calibers, which lent them three unofficial names: the "Thunderer", the "Lightning", and the "Rainmaker". The principal difference between the models was the cartridge in which they were chambered for, these are the "Thunderer" in .41 Long Colt; the "Lightning" in .38 Long Colt; and the "Rainmaker" in .32 Long Colt. All of the models had a six-round capacity.

<span class="mw-page-title-main">Merwin & Hulbert</span> American firearms designer and marketer

Merwin, Hulbert, and Co. or Merwin Hulbert was an American firearms designer and marketer based in New York City which produced revolvers and rifles from 1874 to 1896. The firearms were manufactured by a subsidiary company, Hopkins & Allen of Norwich, Connecticut. Merwin Hulbert's designs had influenced other gunmakers of the time, such as Meriden Firearms Co., Harrington & Richardson, Forehand & Wadsworth, and Iver Johnson.

<span class="mw-page-title-main">Colt House Revolver</span> Revolver

The Colt House Revolver was one of the first metallic cartridge rear-loading revolvers to be produced by the Colt's Patent Fire Arms Manufacturing Company, in 1871. The same year, Colt's also patented the Colt Open Top, another metallic cartridge rear-loader, but in fact the Open Top production didn't start until 1872, although a pocket version of the Open Top, a completely different design, went on sales as of 1871, the Colt Open Top Pocket Model Revolver.

<span class="mw-page-title-main">Colt Model 1871–72 Open Top</span> Revolver

The Colt Model 1871–72 Open Top is a metallic cartridge rear-loading .44-caliber revolver introduced in 1872 by the Colt's Patent Fire Arms Manufacturing Company. This handgun was developed following two patents, the first one in 1871 and the second one in 1872, it is estimated that the production span lies primarily between February 1872 and June 1873. There is therefore still some confusion when naming it. It is sometimes named Colt Model 1871 or Colt Model 1872 but at this time the most common accepted names are Colt Model 1871–72 Open Top, Colt Model 1871–72 or simply Colt Open Top.

<span class="mw-page-title-main">Remington Model 1890</span> Revolver

The Remington Model 1890 New Model Army was a revolver by Remington Arms. It was based on the successful Remington Model 1875 and the lesser known Model 1888 with both revolvers having the same size, appearance, and the removable cylinder. The 1890 Remington single-actions kept the solid frame and similar styling of the 1875 model, but lacking the large web under the ejector rod housing and equipped with checkered rubber grips. Like the 1875 model, the 1890 was suitably made for metallic cartridges, but only issued in .44-40 caliber.

Cimarron Firearms is an American firearms importer that has been in operation since 1984. The company's field of specialty is reproduction firearms from the American Civil War to the end of the Old West period. Founded by Mike Harvey in Houston, Texas, the company is now based in Fredericksburg, Texas.

<span class="mw-page-title-main">Smith & Wesson Model No. 2 Army</span> Revolver

The Smith & Wesson Model No. 2 Army a.k.a. Model No. 2 Old Model Smith & Wesson Revolver was Smith & Wesson's first .32 caliber revolver, intended to combine the small size and convenience of the Smith & Wesson Model 1 .22 rimfire with a larger caliber. Chambered in the .32 rimfire long caliber, its cylinder held 6 shots. It was manufactured 1861 - 1874, with a total production of 77,020.

References

  1. C.A.S. sightings at 50m
  2. 1 2 3 Flayderman, Norm (2001). Flayderman's guide to antique American firearms ... and their values (8th ed.). Iola, WI: Krause Publications. p. 145. ISBN   0-87349-313-3.
  3. Bequette, Roy Marcot; Gangloff, Joel J. Hutchcroft; foreword by Arthur W. Wheaton; chapter introductions by Richard F. Dietz; book design by Robert L. (1998). James W. (ed.). Remington : "America's oldest gunmaker". Peoria, IL: Primedia. ISBN   1-881657-00-0.
  4. 1 2 "Uberti Remingtons". Archived from the original on 23 November 2011. Retrieved 22 November 2011.
  5. Remington Info
  6. Taffin, John (12 October 2005). Single Action Sixguns. Iola, Wisconsin: Krause Publications. pp. 191–193. ISBN   0-87349-953-0.