Remington Model 17

Last updated
Remington Model 17
RemingtonModel17colorized.png
Illustration of a Remington Model 17
Type Shotgun
Place of originUnited States
Production history
Designer John Browning
John Pedersen
Designed1913
Manufacturer Remington Arms
Produced1921–1941
No. built72,644 [1]
Specifications
Mass5.75 lb (2.6 kg)
Barrel  length26 in (660 mm) to 30 in (760 mm)

Cartridge 20 gauge
Action Pump-action
Feed system5-round tubular magazine
Sightsbead

In 1915 John Browning patented a pump-action shotgun with the following features: hammerless, under-loading, tubular-magazine, bottom-ejecting, and take-down. This design would eventually become the Remington Model 17. [2] Manufacturing rights were sold to Remington Arms shortly after, but due to the production efforts of World War I, Remington was unable to begin manufacturing until 1921. Before production began John Pedersen made alterations to the design, with more changes made later by G. H. Garrison. The Model 17 was a trim, 20-gauge shotgun that served as the design basis for three highly successful shotguns: the Remington Model 31, the Ithaca 37 and the Browning BPS. Additionally, features of the Model 17 were also incorporated in the later Mossberg 500 and Remington 870.

Contents

Remington Model 17R

The Remington Model 17R (R for "Riot") was produced with a 20 inch barrel. It did not sell well however a cut-down version featuring a 15.1 inch barrel and a pistol grip gained popularity with Detectives, marketed as the "Model 17R Special Police". Major purchases of this shotgun were made by the New York Police Department and the St. Louis Metropolitan Police Department. The shotgun was referred to as a "Whippit Gun" due to its ease of use to "whip it out and fire". Variants can be found with the short barrel and fixed stock as opposed to pistol grip depending on officer preference. The shotgun is considered a predecessor of the modern full stocked 14-inch combat shotguns favored by law enforcement. [3]

Illustration of the Remington Model 17 Special Police Gun RemingtonModel17SpecialPolice.png
Illustration of the Remington Model 17 Special Police Gun

Users

Related Research Articles

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">John Browning</span> American firearms designer (1855–1926)

John Moses Browning was an American firearm designer who developed many varieties of military and civilian firearms, cartridges, and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating, semi-automatic, and automatic firearms.

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

<span class="mw-page-title-main">Sawed-off shotgun</span> Type of shotgun

A sawed-off shotgun is a type of shotgun with a shorter gun barrel—typically under 18 inches (46 cm)—and often a pistol grip instead of a longer shoulder stock. Despite the colloquial term, barrels do not, strictly speaking, have to be shortened with a saw. Barrels can be manufactured at shorter lengths as an alternative to traditional, longer barrels. This makes them easier to transport and conceal due to their smaller profile and lighter weight. The design also makes the weapon more portable when maneuvering in confined spaces and for that reason law enforcement and military personnel find it useful in close-quarters combat scenarios. As a result of the shorter barrel length, any shotgun with a tubular magazine will have a reduction in its magazine capacity.

<span class="mw-page-title-main">Mossberg 500</span> Series of pump-action shotguns

The Mossberg 500 (M500) is a series of pump action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, 11,000,000 M500s had been produced, making it the most-produced shotgun of all time.

<span class="mw-page-title-main">Ethan Allen (armsmaker)</span> American Arms maker

Ethan Allen was a major American arms maker from Massachusetts. He is unrelated to the revolutionary Ethan Allen. His first firearm, the "Pocket rifle" was developed in 1836, and his first patent was granted in 1837.

The Ithaca 37, also known as the Ithaca Model 37, is a pump-action shotgun made in large numbers for the civilian, law enforcement and military markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements.

Thompson/Center Arms was an American firearms company based in Springfield, Massachusetts. The company was best known for its line of interchangeable-barrel, single-shot pistols and rifles. Thompson/Center also manufactured muzzle-loading rifles and was credited with creating the resurgence of their use in the 1970s.

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

Harrington and Richardson is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

The Browning Automatic 5, most often Auto-5 or simply A-5, is a recoil-operated semi-automatic shotgun designed by John Browning and manufactured by Fabrique Nationale de Herstal. It was the first successful semi-automatic shotgun design, and remained in production until 1998. The name of the shotgun designates that it is an autoloader with a capacity of five rounds, four in the magazine and one in the chamber. Remington Arms and Savage Arms sold variants called the Remington Model 11 and Savage Model 720 that were nearly identical but lacked the magazine cutoff found on the Browning.

The Winchester Model 21 is a deluxe side by side shotgun. The shotgun's initial production run from 1931 through 1959 yielded approximately 30,000 guns. Winchester Repeating Arms Company ceased the main production line of this shotgun in 1960 and the Model 21 was sourced to the Winchester Custom Shop until the gun's retirement in 1991. New Winchester Model 21 production continues under license to Connecticut Shotgun Manufacturing Company.

<span class="mw-page-title-main">Browning BLR</span> Lever action rifle

The Browning BLR is a lever-action rifle manufactured for Browning Arms Company by Miroku Firearms in Japan. It comes in many different variations and is chambered in numerous calibers from small and fast to the large Magnum rounds, and the large bore .450 Marlin.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Title II weapons</span> Class of weapons under the National Firearms Act

Title II weapons, or NFA firearms, are designations of certain weapons under the United States National Firearms Act (NFA).

<span class="mw-page-title-main">Smith & Wesson M&P15</span> AR-15 style semi-automatic rifle

The Smith & Wesson M&P15 is an AR-15 style semi-automatic rifle by Smith & Wesson. Introduced in 2006, the firearm is designed for police use and consumer markets.

Chiappa Firearms, Armi Sport di Chiappa, is an Italian firearms manufacturing company based in Brescia. It was founded in 1958 by Ezechiele Chiappa as Armi Sport. Total unit production is around 60,000 per year. Its U.S. headquarters are in Dayton, Ohio.

<span class="mw-page-title-main">Merwin & Hulbert</span> American firearms designer and marketer

Merwin, Hulbert, and Co. or Merwin Hulbert was an American firearms designer and marketer based in New York City which produced revolvers and rifles from 1874 to 1896. The firearms were manufactured by a subsidiary company, Hopkins & Allen of Norwich, Connecticut. Merwin Hulbert's designs had influenced other gunmakers of the time, such as Meriden Firearms Co., Harrington & Richardson, Forehand & Wadsworth, and Iver Johnson.

The Remington Model 572 Fieldmaster is a slide action, manually-operated .22 caliber (rimfire) repeating rifle manufactured by Remington Arms Company. First introduced to the commercial market in 1956, the 572 Fieldmaster rifle incorporates a tubular magazine capable of feeding .22 Short, .22 Long, or .22 Long Rifle rimfire cartridges, a cross-bolt safety, and an aluminum receiver grooved for scope mounts. The original Fieldmaster used a 22.75-inch barrel. The Model 572 uses many of the design features first introduced on the Remington Model 870 shotgun, and replaced the Model 121 Fieldmaster as the company's slide-action rimfire repeater. The 572 was discontinued in 2020 following the bankruptcy of the parent company.

<span class="mw-page-title-main">Hawk Industries Type 97</span> Depending on variant:

The Hawk Industries Type 97 is the factory and official Chinese military and police designation of a shotgun design patterned after the Remington Model 870, and manufactured by Hawk Industries, a division of the China North Industries Corporation. The Type 97 is the base designation attributed to a variety of models with multiple configurations to suit different purposes and applications.

References

  1. Remington Model 17 - remington society of america. Remington Society of America - An organization dedicated to the collection and study of Remington firearms, ammunition and history. (2018, March 3). https://www.remingtonsociety.org/model_17/
  2. Firearm Model History - Remington Model 17
  3. 1 2 Thompson, Leroy (16 February 2024). Greenhill Military Manuals. Greenhill Books. p. 71. ISBN   1-85367-515-6.