8mm Remington Magnum

Last updated
8mm Remington Magnum
8mm Remington Magnum with .308 win and .375 H&H for comparison.JPG
8mm Remington Magnum (center) with .308 Winchester (left) and .375 H&H Magnum (right).
Type Rifle
Place of origin United States
Service history
In serviceNever issued
Production history
Designer Remington Arms Company
Designed1978
ManufacturerRemington
Produced1978–present
Specifications
Parent case .375 H&H Magnum
Case typeBelted, bottleneck
Bullet diameter.323 in (8.2 mm)
Neck diameter.355 in (9.0 mm)
Shoulder diameter.487 in (12.4 mm)
Base diameter.513 in (13.0 mm)
Rim diameter.532 in (13.5 mm)
Rim thickness.050 in (1.3 mm)
Case length2.850 in (72.4 mm)
Overall length3.600 in (91.4 mm)
Case capacity99.0  gr H2O (6.42 cm3)
Rifling twist1 in 10 (1 in 254 mm)
Primer typeLarge Rifle
Maximum pressure (C.I.P.)63,817 psi (440.00 MPa)
Maximum pressure (SAAMI)65,000.0 psi (448.159 MPa)
Ballistic performance
Bullet mass/typeVelocityEnergy
200 gr (13 g) Partition type2,900 ft/s (880 m/s)3,734 ft⋅lbf (5,063 J)
200 gr (13 g) Bonded3,050 ft/s (930 m/s)4,132 ft⋅lbf (5,602 J)
180 gr (12 g) Protected point3,210 ft/s (980 m/s)4,119 ft⋅lbf (5,585 J)
180 gr (12 g) Polymer tipped3,315 ft/s (1,010 m/s)4,394 ft⋅lbf (5,957 J)
220 gr (14 g) Soft Point2,965 ft/s (904 m/s)4,296 ft⋅lbf (5,825 J)
Test barrel length: 22 in (56 cm) 24 in (61 cm) and 26 in (66 cm)
Source(s): Remington [1] / Nosler [2] /Sierra

The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield. [3]

Contents

Background

The 8mm Remington Magnum was intended to compete with the .300 Weatherby Magnum and .338 Winchester Magnum. Remington's decision to use a metric bullet may have been prompted by their past success with the 7 mm bore diameter. [3]

Even though the 8mm Remington Magnum has never been very popular, it is a very suitable cartridge for the hunting of elk, moose, caribou, and larger African antelope. However, the .338 Winchester Magnum had a 30-year head start on the market, and is short enough for medium length actions, which increases the models of rifles it could be produced in. It is also available with heavier bullets, although this isn't a problem for people that load their own rounds of this caliber. Bullet selection is quite critical with the 8mm Remington Magnum since the bullets have to be designed and constructed to hold together at magnum velocities. [4]

Cartridge dimensions

The 8mm Remington Magnum has 6.43 ml (99 grain) H2O cartridge case capacity.

8 mm Remington Magnum.svg

8mm Remington Magnum maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).

Americans would define the shoulder angle at alpha/2 = 25 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 8.00 mm, Ø grooves = 8.20 mm, land width = 3.10 mm and the primer type is large rifle magnum.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines the 8mm Remington Magnum case can handle up to 440.00 MPa (63,817 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.

This means that 8mm Remington Magnum chambered arms in C.I.P. regulated countries are currently (2014) proof tested at 550.00 MPa (79,771 psi) PE piezo pressure. [5]

The SAAMI Maximum Average Pressure (MAP) for this cartridge is 65,000 psi (448.16 MPa) piezo pressure. [6]

The German 8×68mm S cartridge introduced in 1939 is probably the closest ballistic twin of the 8mm Remington Magnum. The 8×68mm S is however a rebated rim cartridge.

The 8mm Remington Magnum in field use

The 8mm Remington Magnum as a pure civil cartridge can be used in countries which ban civil use of former or current military ammunition.

A powerful cartridge like the 8mm Remington Magnum has its drawbacks. Like every other big game cartridge it presents a stout recoil. Since there are not many factory loads available, the 8mm Remington Magnum is often used by reloaders. They can use this cartridge to create powerful loads by handloading, while staying within the 448 MPa (65000 psi) SAAMI piezo pressure limit. Combined with bullets with jackets designed for magnum cartridge muzzle velocities, and barrels of 650 mm (25.6 in) or longer to promote high muzzle velocities, the 8mm Remington Magnum offers the flattest trajectory and best long range performance of the commercially available 8 mm rifle cartridges.

From 8 mm caliber upwards the rise of sectional density and penetrating capability of practical spin stabilized rifle bullets (bullets up to 5 to 5.5 calibers in length) tends to flatten out. [7]

This means that loaded with light, short and soft-nosed 8 mm bullets the 8mm Remington Magnum can be used on remarkably small game. Loaded with heavy, long and hard (solid copper) bullets the 8mm Remington Magnum offers enough velocity derived power to penetrate heavy and dangerous game. With developed handloads, the 8mm Remington Magnum is capable of driving a 220 grain boat tail bullet in excess of 3,000 ft/sec, and delivers as much energy at 500 yards (457m) as the .308 Winchester has at the muzzle. Lighter bullets of 150-180 grains can be driven to velocities of 3,300-3,500 ft/sec, putting it in the same class as the larger cased .300 Remington Ultra Magnum; Such loads offer a very flat trajectory, making it an optimal choice for deer and elk sized game at very long range. The 8mm Remington Magnum is suitable for hunting almost any game animal on the planet, though certain sub-Saharan Africa countries have a 9.53 mm (.375 in) or 10.2 mm (.40 in) minimum caliber rule for hunting Big Five game - i.e. leopard, lion, cape buffalo, rhinoceros and African elephant. In the Central African Republic, where there are no ammunition limits for hunting Big Five game, the 8mm Remington Magnum's somewhat smaller sister cartridge the 8×68mm S is used successfully for hunting African elephant. At equal chamber pressure and 650 mm (25.6 in) barrel length the larger 8mm Remington Magnum produces 3 to 5% extra muzzle velocity.

8mm cartridges compared

Maximum muzzle velocity comparison in % of the probably most proliferated European and American 8 mm rifle cartridges out of 650 mm (25.59 in) long barrels loaded with relatively light to heavy 8 mm bullets to their C.I.P. or SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) sanctioned maximum pressures.

Bullet weight gram (grain)8.23 g (127 gr)9.72 g (150 gr)11.34 g (175 gr)12.96 g (200 gr)14.26 g (220 gr)Case capacity (%)
7.92×57mm Mauser (8×57mm IS)100.0100.0100.0100.0100.0100.0
8×64mm S102.7102.7102.8102.9102.9110.3
.325 WSM108.7109.1109.0109.3111.1131.7
8×68mm S108.4108.5108.7110.5112.3136.5
8mm Rem. Mag.111.9112.3114.5115.3116.0157.1

This comparison is not totally objective since the 8mm Remington Magnum and .325 WSM operate at 448.16 MPa (65,000 psi), the 8×68mm S at 440 MPa (63,817 psi), the 8×64mm S at 405 MPa (58,740 psi) and the 7.92×57mm Mauser at 390 MPa (56,564 psi) maximum chamber pressure. Higher chamber pressure results in higher muzzle velocities.

The 8mm Remington Magnum as parent case

7mm STW (Shooting Times Westerner)

The 8mm Remington Magnum case has functioned as the parent case for the 7mm STW, which is essentially a 7 mm (.284 caliber) necked-down version of the 8mm Remington Magnum. Designed by Layne Simpson, Editor of Shooting Times magazine, the wildcat status of the 7mm STW ended in 1996 when it got SAAMI certified and became an officially registered and sanctioned member of the 8mm Remington Magnum "family" of magnum rifle cartridges. With top handloads pushing a 150 grain bullet at nearly 3,400 feet per second, it is one of the fastest mid-bore rifle cartridges extant and is noted for its extremely flat trajectory. It is outclassed only by the Lazzeroni 7.21 Firebird and Remington's 7mm RUM

.416 Remington Magnum

The 8mm Remington Magnum case also has functioned as the parent case for the .416 Remington Magnum, which is a .416" caliber necked up version of the 8mm Remington Magnum. Unlike the 7 mm STW, the .416 Remington Magnum never had a wildcat status. It was designed by Remington and released directly to the public in 1988.

Wildcats

Cartridges that are not officially registered with nor sanctioned by C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) or its American equivalent, SAAMI (Sporting Arms and Ammunition Manufacturers’ Institute) are generally known as wildcats. By blowing out standard factory cases the wildcatter generally hopes to gain extra muzzle velocity by increasing the case capacity of the factory parent cartridge case by a few percent. Practically there can be some muzzle velocity gained by this method, but the measured results between parent cartridges and their 'improved' wildcat offspring is often marginal. Besides changing the shape and internal volume of the parent cartridge case, wildcatters also can change the original caliber. A reason to change the original caliber can be to comply with a minimal permitted caliber or bullet weight for the legal hunting of certain species of game.

Wildcats are not governed by C.I.P. or SAAMI rules so wildcatters can capitalize the achievable high operating pressures. Because the 8mm Remington Magnum offers an exceptional sturdy, pressure resistant cartridge case that can relatively easily be reloaded with primers, powder and bullets and hence be reused several times it has become quite popular amongst wildcatters. With the 8mm Remington Magnum as the parent case wildcatters have created 6.35 mm (0.257 in) (.257 STW), 6.5 mm (0.264 in) (6.5 mm STW), .30 caliber (.30–8mm Remington Magnum, .300 Jarrett), 8 mm caliber (8 mm Jarrett), .338 caliber (.338 Jarrett), 0.358 in caliber (.358 STA) and 9.53 mm (0.375 in) (.375 JRS [John R. Sundra]) variants.

.358 STA (Shooting Times Alaskan)

Another brainchild of Layne Simpson, the .358 STA is an 8mm Remington Magnum case necked up to accept .358 Caliber bullets with the shoulder angle changed from 25 degrees to 35 degrees and body taper removed to maximize powder capacity. Able to propel a 300 grain bullet at over 2700 feet per second for 4,900 ft.-lbs. of energy, the .358 STA is a formidable big game cartridge. It has never emerged as a production cartridge and has had very limited success as a wildcat, overshadowed by the more popular .375 caliber commercial and custom cartridges.

See also

Related Research Articles

<span class="mw-page-title-main">.338 Lapua Magnum</span> Finnish rifle cartridge

The .338 Lapua Magnum is a rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. Due to its use in the War in Afghanistan and the Iraq War, the cartridge has become widely available.

<span class="mw-page-title-main">.223 Remington</span> Firearms cartridge

The .223 Remington is a rimless, bottlenecked, centerfire rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command of the United States Army as part of a project to create a small-caliber, high-velocity firearm. The .223 Remington is considered one of the most popular common-use cartridges and is currently used by a wide range of semi-automatic and manual-action rifles.

<span class="mw-page-title-main">.308 Winchester</span> Rimless, centerfire, bottlenecked rifle cartridge

The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar, but not identical, to the 7.62×51mm NATO cartridge.

<span class="mw-page-title-main">7×57mm Mauser</span> German military rifle cartridge

The 7×57mm Mauser is a first-generation smokeless powder rimless bottlenecked rifle cartridge. It was developed by Paul Mauser of the Mauser company in 1892 and adopted as a military cartridge by Spain in 1893. It was subsequently adopted by several other countries as the standard military cartridge, and although now obsolete as a military cartridge, it remains in widespread international use as a sporting round. The 7×57 Mauser was a popular stalking cartridge and sporting rifles in this chambering were made by the famous British riflemakers, such as John Rigby, Holland and Holland, Westley Richards and others. British cartridge nomenclature designated caliber in inches, and the cartridge was known as the .275 bore after the measurement of a 7 mm rifle's bore across the lands. The cartridge is sometimes erroneously referred to as the ".275 Rigby", However, the original John Rigby & Sons never referred to the cartridge by that name, nor did any of UK gun trade; the Rigby association is a misconception attributed to modern American gun writers.

<span class="mw-page-title-main">6.5×55mm Swedish</span> Nordic 6mm centerfire cartridge

6.5×55mm Swedish, also known simply as 6.5×55mm, 6.5x55 SE, 6.5x55 Swede, or in its native military as 6.5 mm patron m/94, meaning "6.5 mm cartridge model 94", referring to 1894, is a first-generation smokeless powder rimless bottlenecked rifle cartridge. The cartridge has most users in the Scandinavian countries, where it is known as the 6,5×55 or just "the 6,5".

<span class="mw-page-title-main">7.92×57mm Mauser</span> German military rifle cartridge

The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge. The 7.92×57mm Mauser cartridge was adopted by the German Empire in 1903–1905, and was the German service cartridge in both World Wars. In its prime, the 7.92×57mm Mauser cartridge was one of the world's most popular military cartridges. In the 21st century it is still a popular sport and hunting cartridge that is factory-produced in Europe and the United States.

The .416 Rigby is a rifle cartridge designed in 1911 by London based gunmaker John Rigby & Company, for hunting dangerous game. It is the first cartridge to use a bullet of .416 inch diameter. The rifles, as built by John Rigby & Co., were initially made up on the Magnum Mauser 98 action, although in later years, some were made on standard length actions, a perfect example being the rifle used by legendary professional hunter Harry Selby. Other famous users of the cartridge were Commander David Enderby Blunt, John Taylor, and Jack O'Connor.

<span class="mw-page-title-main">.300 Winchester Magnum</span> Rifle cartridge

The .300 Winchester Magnum is a belted, bottlenecked magnum rifle cartridge that was introduced by the Winchester Repeating Arms Company in 1963. The .300 Winchester Magnum is a magnum cartridge designed to fit in a standard rifle action. It is based on the .375 H&H Magnum, which has been blown out, shortened, and necked down to accept a .30 caliber (7.62 mm) bullet.

<span class="mw-page-title-main">7mm Remington Magnum</span> Rifle cartridge

The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum. The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum.

<span class="mw-page-title-main">8×68mm S</span>

The 8×68mm S rebated rim bottlenecked centerfire rifle cartridge was developed in the 1930s by August Schüler of the August Schüler Waffenfabrik, Suhl, Germany as a magnum hunting cartridge that would just fit and function in standard-sized Mauser 98 bolt-action rifles. The bore has the same lands and grooves diameters as the German 7.92×57mm Mauser service cartridge. This is one of the early examples where a completely new rifle cartridge was developed by a gunsmith to fit a specific popular and widespread type of rifle.

The .260 Remington cartridge was introduced by Remington in 1997. Many wildcat cartridges based on the .308 Winchester case had existed for years before Remington standardized this round.

The 6.5×68mm rebated rim bottlenecked centerfire rifle cartridge and its sister cartridge the 8×68mm S were developed in the 1930s by August Schüler from the August Schüler Waffenfabrik, Suhl, Germany as magnum hunting cartridges that would just fit and function in standard-sized Mauser 98 bolt-action rifles. This is one of the early examples where a completely new rifle cartridge was developed by a gunsmith to fit a specific popular and widespread type of rifle.

<span class="mw-page-title-main">7×64mm</span> German hunting rifle cartridge

The 7×64mm is a rimless bottlenecked centerfire cartridge developed for hunting. As is customary in European cartridges, the 7 denotes the 7 mm bore diameter and the 64 denotes the 64 mm (2.5 in) case length. The 7×64mm is a popular hunting cartridge in Central Europe due to its 11.95 mm (0.470 in) case head diameter and 84 mm (3.3 in) overall length allowing it to easily be chambered in the Mauser 98 bolt-action rifle that was once standard German military issue.

The 9.3×64mm Brenneke is a rimless bottlenecked centerfire rifle cartridge designed in 1927 by German gunmaker Wilhelm Brenneke. It is suitable for hunting medium to large game animals in Africa, Asia, Europe, and North America.

<span class="mw-page-title-main">.416 Remington Magnum</span> Rifle cartridge

The .416 Remington Magnum is a .416 caliber (10.57 mm) cartridge of belted bottlenecked design. The cartridge was intended as a dangerous game hunting cartridge and released to the public in 1989. The cartridge uses the case of the 8 mm Remington Magnum as a parent cartridge. When the cartridge was released in 1988, author Frank C. Barnes considered the .416 Remington Magnum to be the "most outstanding factory cartridge introduced in decades".

The 8×64mm S is a rimless bottlenecked centerfire cartridge developed as a military service round for the German Army who never issued it. As is customary in European cartridges the 8 denotes the 8 mm bullet caliber and the 64 denotes the 64 mm (2.52 in) case length.

<span class="mw-page-title-main">.325 Winchester Short Magnum</span> Rifle cartridge

The .325 Winchester Short Magnum, commonly known as the 325 WSM, is an 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge. The cartridge was introduced by Winchester Ammunition in 2005.

<span class="mw-page-title-main">.284 Winchester</span> US rifle cartridge

The .284 Winchester is a firearm cartridge, introduced by Winchester in 1963.

<span class="mw-page-title-main">6.5mm Creedmoor</span> Centerfire rifle cartridge

The 6.5mm Creedmoor (6.5×48mm), designated 6.5 Creedmoor by SAAMI, 6.5 Creedmoor by the C.I.P. or 6.5 CM or 6.5 CRDMR for short, is a centerfire rifle cartridge introduced by Hornady in 2007. It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name. The cartridge is a necked-down modification of the .30 Thompson Center.

The .450 Rigby is a rifle cartridge designed in 1994 by John Rigby & Co. for the hunting of large, thick-skinned dangerous game animals in Africa. The cartridge is based on the .416 Rigby necked up to accept a .458 in (11.6 mm) bullet and is intended for use in magazine rifles. The cartridge should not be confused with .450 Nitro Express which was introduced by Rigby in 1898, and is a rimmed cartridge intended for use in double rifles.

References

  1. "Remington". Archived from the original on 2007-03-29. Retrieved 2007-03-29.
  2. "Nosler". Archived from the original on 2009-04-22. Retrieved 2018-09-27.
  3. 1 2 "8mm Rem data from Accurate Powder" (PDF). Archived from the original (PDF) on 2008-10-06. Retrieved 2007-08-20.
  4. Hodgdon Data Manual 26th Edition
  5. C.I.P. TDCC sheet 8 mm Rem. Mag.
  6. ANSI/SAAMI Velocity & Pressure Data: Centerfire Rifle Archived 2013-07-02 at the Wayback Machine
  7. "What is the maximum length of a spin stabilized projectile? by B. Kneubühl" (PDF). Archived from the original (PDF) on 2007-11-27. Retrieved 2007-11-18.