.416 Taylor

Last updated
.416 Taylor
TypeCenterfire/Rifle
Production history
DesignerRobert Chatfield-Taylor
Designed1972
ManufacturerA-Square
Specifications
Parent case .458 Winchester Magnum
Case typeBelted, bottleneck
Bullet diameter.416 in (10.6 mm)
Neck diameter.447 in (11.4 mm)
Shoulder diameter.491 in (12.5 mm)
Base diameter.512 in (13.0 mm)
Rim diameter.532 in (13.5 mm)
Rim thickness.050 in (1.3 mm)
Case length2.5 in (64 mm)
Overall length3.34 in (85 mm)
Rifling twist1 in 14 in (360 mm)
Primer typeMagnum Rifle

The .416 Taylor is a rifle cartridge. According to Ken Waters in Pet Loads, it was created by Robert Chatfield-Taylor in the early 1970s, with the first rifle in this caliber being a factory barreled Winchester Model 70. [1] The case is based on the .458 Winchester Magnum necked down to accept .416 caliber bullets.

Contents

Usage

The .416 Taylor uses a .416 in (10.6 mm) bullet diameter. [2] With maximum loads, the cartridge is capable of propelling a 400-grain (26 g) bullet at an average of 2,350 ft/s (720 m/s) from a 24 in (61 cm) barrel [3] yielding a muzzle energy of 4,903 ft⋅lbf (6,648 J). The work on this caliber (performed by Waters) was done with an experimental factory Ruger Model 77. He reported that an absolute maximum load of certain listed powders would push a 400-grain (26 g) bullet to 2,400 ft/s (730 m/s), thereby equaling (and perhaps exceeding) the performance of the .416 Rigby (presuming moderate temperatures and barometric pressures). Waters also reported that 400-grain (26 g) bullets could exceed 2,600 ft/s (790 m/s) when propelled by certain listed powders. Under normal hunting conditions, the Taylor cartridge is therefore capable of taking any of the largest and most dangerous game animals in the world.

Gunsmiths are rebarreling Browning BAR .338 Winchester Magnum rifles with .416 Taylor barrels thereby creating semi-automatic hunting rifles in a true dangerous game caliber. [4]

Origin

The cartridge was created to replace the magnum length .416 Rigby which at that time was nearly obsolete, with a cartridge that would fit into a standard length bolt-action rifle. The shorter action rifles are not only easier to carry in heavy cover, but also make it more convenient to carry more ammunition. [5] The advantages to cartridges in .416 inch bullet diameter are that they generally present the shooter with less recoil and flatter trajectory than the larger .458 caliber dangerous game rifles (like the .458 Winchester Magnum). They also have more striking power and penetration than medium bores like the .375 H&H Magnum. The 416 Taylor is a SAAMI standardized cartridge, [6] and was offered as a standard production item by A-Square until it closed in 2011. It is currently loaded by Norma of Sweden.

See also

Related Research Articles

<span class="mw-page-title-main">Elephant gun</span> Large firearm for hunting big game

An elephant gun is a large caliber gun, rifled or smoothbore, originally developed for use by big-game hunters for elephant and other large game. Elephant guns were black powder muzzle-loaders at first, then black powder express rifles, then later used smokeless powder cartridges.

<span class="mw-page-title-main">.460 Weatherby Magnum</span> Rifle cartridge

The .460 Weatherby Magnum is a belted, bottlenecked rifle cartridge, developed by Roy Weatherby in 1957. The cartridge is based on the .378 Weatherby Magnum necked up to accept the .458-inch (11.6 mm) bullet. The original .378 Weatherby Magnum parent case was inspired by the .416 Rigby. The .460 Weatherby Magnum was designed as an African dangerous game rifle cartridge for the hunting of heavy, thick skinned dangerous game.

<span class="mw-page-title-main">Express (weaponry)</span> Term applicable to hunting rifles and ammunition

The term express was first applied to hunting rifles and ammunition beginning in the mid-19th century, to indicate a rifle or ammunition capable of higher than typical velocities. The early express cartridges used a heavy charge of black powder to propel a lightweight, often hollow point bullet, at high velocities to maximize point blank range. Later the express cartridges were loaded with nitrocellulose-based gunpowder, leading to the Nitro Express cartridges, the first of which was the .450 Nitro Express.

The .510 Whisper / 13x47mm is a subsonic rifle cartridge developed by SSK Industries for use in suppressed rifles. It is capable of firing a .51 caliber bullet weighing 750 gr (49 g) at roughly 1,050 ft/s (320 m/s).

<span class="mw-page-title-main">.45-70</span> Rifle cartridge designed by the U.S. Army

The .45-70 (11.6x53mmR), also known as the .45-70 Government, .45-70 Springfield, and .45-2110" Sharps, is a .45 caliber rifle cartridge originally holding 70 grains of black powder that was developed at the U.S. Army's Springfield Armory for use in the Springfield Model 1873. It was a replacement for the stop-gap .50-70 Government cartridge, which had been adopted in 1866, one year after the end of the American Civil War, and is known by collectors as the "Trapdoor Springfield".

The .470 Capstick is a rifle cartridge created by Col. Arthur B Alphin from A-Square in 1990, named after writer and hunter Peter Hathaway Capstick. It is based on a .375 H&H Magnum case blown out and necked to accept a .475 inch (12 mm) bullet. With 500 grain bullets, it can achieve 2400 feet per second (730 m/s) muzzle velocity from a 26" barrel.

<span class="mw-page-title-main">.458 Winchester Magnum</span> Rifle cartridge

The .458 Winchester Magnum is a belted, straight-taper cased, Big Five game rifle cartridge. It was introduced commercially in 1956 by Winchester and first chambered in the Winchester Model 70 African rifle. It was designed to compete against the .450 Nitro Express and the .470 Nitro Express cartridges used in big bore British double rifles. The .458 Winchester Magnum remains one of the most popular large game cartridges, and most major ammunition manufacturers offer a selection of .458 ammunition.

The .416 Rigby / 10.57x73mm is a rifle cartridge designed in 1911 by London based gunmaker John Rigby & Company, for hunting dangerous game. It is the first cartridge to use a bullet of .416 inch diameter. The rifles, as built by John Rigby & Co., were initially made up on the Magnum Mauser 98 action, although in later years, some were made on standard length actions, a perfect example being the rifle used by legendary professional hunter Harry Selby. Other famous users of the cartridge were Commander David Enderby Blunt, John Taylor, and Jack O'Connor.

<span class="mw-page-title-main">.375 H&H Magnum</span> British rifle cartridge

The .375 H&H Magnum, also known as .375 Holland & Holland Magnum, is a medium-bore rifle cartridge introduced in 1912 by London based gunmaker Holland & Holland. The .375 H&H cartridge featured a belt to ensure the correct headspace, which otherwise might be unreliable, given the narrow shoulder of the cartridge case. The cartridge was designed to use cordite which was made in long strands – hence the tapered shape of the case, which, as a beneficial side effect also helped in smooth chambering and extraction from a rifle's breech.

<span class="mw-page-title-main">.338 Winchester Magnum</span> Rifle cartridge

The .338 Winchester Magnum is a .338 in (8.6 mm) caliber, belted, rimless, bottlenecked cartridge introduced in 1958 by Winchester Repeating Arms. It is based on the blown-out, shortened .375 H&H Magnum. The .338 in (8.6 mm) is the caliber at which medium-bore cartridges are considered to begin. The .338 Winchester Magnum is the first choice among professional brown bear guides in Alaska to back up clients where a powerful stopping caliber is required on charging bears. It is also the most popular medium-bore cartridge in North America and has the most widely available choice in rifles among medium bore rifles. The action length is the same as a .30-06, and most major rifle manufacturers in the United States chamber rifles for the cartridge including the semi-automatic Browning BAR Mk II Safari, making it a very powerful combination against charging dangerous game. The cartridge was intended for larger North American big-game species and has found use as for the hunting of thin-skinned African plains-game species.

<span class="mw-page-title-main">7mm Remington Magnum</span> Rifle cartridge

The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum. The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum.

<span class="mw-page-title-main">8mm Remington Magnum</span> Rifle cartridge

The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.

<span class="mw-page-title-main">.35 Whelen</span> US medium-bore rifle cartridge

The .35 Whelen is a powerful medium-bore rifle cartridge that does not require a magnum action or a magnum bolt-face. The parent of this cartridge is the .30-06 Springfield, which is necked-up to accept a bullet diameter of .358 in (9.1 mm). This cartridge is more powerful than its parent, especially in killing power on large game. However, with much wider availability, and the higher BC .30 caliber bullets of today, the power gap between the two cartridges has been decreased.

<span class="mw-page-title-main">.416 Remington Magnum</span> Rifle cartridge

The .416 Remington Magnum is a .416 caliber (10.57 mm) cartridge of belted bottlenecked design. The cartridge was intended as a dangerous game hunting cartridge and released to the public in 1989. The cartridge uses the case of the 8 mm Remington Magnum as a parent cartridge. When the cartridge was released in 1988, author Frank C. Barnes considered the .416 Remington Magnum to be the "most outstanding factory cartridge introduced in decades".

<span class="mw-page-title-main">.325 Winchester Short Magnum</span> Rifle cartridge

The .325 Winchester Short Magnum, commonly known as the 325 WSM, is an 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge. The cartridge was introduced by Winchester Ammunition in 2005.

The .400 H&H Magnum also known as .400 Holland & Holland Magnum is a belted rimless bottlenecked cartridge introduced by Holland & Holland. The cartridge was released together with the .465 H&H Magnum in 2003. It is based on the .375 H&H Magnum case.

<span class="mw-page-title-main">.458 Lott</span> Cartridge

The .458 Lott is a .458 caliber rifle cartridge designed for the purpose of hunting large, thick-skinned dangerous game animals in Africa. It is based on the full length .375 H&H Magnum case blown out and shortened to 2.800 inches (71.1 mm).

A-Square Company, LLC was a manufacturer of rifles, ammunition and bullets based in Chamberlain, South Dakota, in the United States. The company was one of 19 that are members of the Sporting Arms and Ammunition Manufacturer's Institution (SAAMI). The company's focus was on its firearms for hunting large dangerous game. This was reflected in the selection of larger caliber chamberings in the company's rifles.

The .450 Rigby is a rifle cartridge designed in 1994 by John Rigby & Co. for the purpose of hunting large, thick-skinned dangerous African game animals. The cartridge is essentially a .416 Rigby necked up to accept a .458 in (11.6 mm) bullet, although with a higher operating pressure and much of the original taper removed. It is intended for use in magazine rifles. The cartridge should not be confused with .450 Nitro Express, introduced by Rigby in 1898, which is a rimmed cartridge of lesser performance intended for use in double and single shot rifles.

The .500 Whisper or .500 Whisper Short Belted is a subsonic rifle cartridge developed by SSK Industries for use in suppressed rifles. It is capable of firing a .51 caliber bullet weighing 750 gr (49 g) at roughly 1,050 ft/s (320 m/s).

References

  1. Waters, Ken (2008). Pet Loads the Complete Volume 9th Edition. Wolfe Pub Co. p. 1166. ISBN   978-1-879356-64-1.
  2. Branch, Jon C. (27 March 2018). ".416 Taylor". Revivaler. Archived from the original on 25 May 2022. Retrieved 23 November 2022. The .416 Taylor is simply the .458 Winchester Magnum case necked down to accept .416″ bullets.
  3. Alphin, Arthur B. ed Alphin, Arthur B. Alphin An Shot You Want (Bedford, KY: On Target Press, 1996), p.513
  4. Branch, Jon C. (28 March 2018). "Browning BAR in .416 Taylor or .458 Winchester Magnum". Revivaler. Archived from the original on 23 November 2022. Retrieved 23 November 2022.
  5. Boddington, Craig (March 2007). "The .416 Taylor Revisited". Guns&Ammo. Archived from the original on 2013-01-26. Retrieved 18 September 2010. the rifle was a great deal more compact than any large-actioned Rigby... Finally, the ammunition is a great deal more compact.
  6. Alphin, Arthur B. ed Alphin, Arthur B. Alphin An Shot You Want (Bedford, KY: On Target Press, 1996), p.511