Modulating retro-reflector

Last updated

A modulating retro-reflector (MRR) system combines an optical retro-reflector and an optical modulator to allow optical communications [1] and sometimes other functions such as programmable signage. [2]

Contents

Free space optical communication technology has emerged in recent years as an attractive alternative to the conventional radio frequency (RF) systems. This emergence is due in large part to the increasing maturity of lasers and compact optical systems that enable exploitation of the inherent advantages (over RF) of the much shorter wavelengths characteristic of optical and near-infrared carriers: [1]

Fig 1. Modulating Retro-reflector Technology Overview. Modulating Retro reflector Diagram.gif
Fig 1. Modulating Retro-reflector Technology Overview.

Technology

An MRR couples or combines an optical retroreflector with a modulator to reflect modulated optical signals directly back to an optical receiver or transceiver, allowing the MRR to function as an optical communications device without emitting its own optical power. This can allow the MRR to communicate optically over long distances without needing substantial on-board power supplies. The function of the retroreflection component is to direct the reflection back to or near to the source of the light. The modulation component changes the intensity of the reflection. The idea applies to optical communication in a broad sense including not only laser-based data communications but also human observers and road signs. A number of technologies have been proposed, investigated, and developed for the modulation component, including actuated micromirrors, frustrated total internal reflection, electro-optic modulators (EOMs), piezo-actuated deflectors, [3] multiple quantum well (MQW) devices, [4] [5] and liquid crystal modulators, though any one of numerous known optical modulation technologies could be used in theory. These approaches have many advantages and disadvantages relative to one another with respect to such features as power use, speed, modulation range, compactness, retroreflection divergence, cost, and many others.

In a typical optical communications arrangement, the MRR with its related electronics is mounted on a convenient platform and connected to a host computer which has the data that are to be transferred. A remotely located optical transmitter/receiver system usually consisting of a laser, telescope, and detector provides an optical signal to the modulating retro-reflector. The incident light from the transmitter system is both modulated by the MRR and reflected directly back toward the transmitter (via the retroreflection property). Figure 1 illustrates the concept. [1]

One modulating retro-reflector at the Naval Research Laboratory (NRL) in the United States uses a semiconductor based MQW shutter capable of modulation rates up to 10 Mbit/s, depending on link characteristics. (See "Modulating Retro-reflector Using Multiple Quantum Well Technology", U.S. Patent No. 6,154,299, awarded November, 2000.) [1]

The optical nature of the technology provides communications that are not susceptible to issues related to electromagnetic frequency allocation. The multiple quantum well modulating retro-reflector has the added advantages of being compact, lightweight, and requires very little power. The small-array MRR provides up to an order of magnitude in consumed power savings over an equivalent RF system. [1] However, MQW modulators also have relatively small modulation ranges compared to other technologies.

The concept of a modulating retro-reflector is not new, dating back to the 1940s. Various demonstrations of such devices have been built over the years, though the demonstration of the first MQW MRR in 1993 [6] was notable in achieving significant data rates. However, MRRs are still not widely used, and most research and development in that area is confined to rather exploratory military applications, as free-space optical communications in general tends to be a rather specialized niche technology.

Qualities often considered desirable in MRRs (obviously depending on the application) include a high switching speed, low power consumption, large area, wide field-of-view, and high optical quality. It should also function at certain wavelengths where appropriate laser sources are available, be radiation-tolerant (for non-terrestrial applications), and be rugged. Mechanical shutters and ferroelectric liquid crystal (FLC) devices, for example, are too slow, heavy, or are not robust enough for many applications. Some modulating retro-reflector systems are desired to operate at data rates of megabits per second (Mbit/s) and higher and over large temperature ranges characteristic of installation out-of-doors and in space.

Multiple Quantum Well Modulators

Semiconductor MQW modulators are one of the few technologies that meet all the requirements need for United States Navy applications, and consequently the Naval Research Laboratory is particularly active in developing and promoting that approach. When used as a shutter, MQW technology offers many advantages: it is robust solid state, operates at low voltages (less than 20 mV) and low power (tens of milliWatts), and is capable of very high switching speeds. MQW modulators have been run at Gbit/s data rates in fiber optic applications. [1]

When a moderate (~15V) voltage is placed across the shutter in reverse bias, the absorption feature changes, shifting to longer wavelengths and dropping in magnitude. Thus, the transmission of the device near this absorption feature changes dramatically, allowing a signal can be encoded in an on-off-keying format onto the carrier interrogation beam. [1]

This modulator consists of 75 periods of InGaAs wells surrounded by AlGaAs barriers. The device is grown on an n-type GaAs wafer and is capped by a p-type contact layer, thus forming a PIN diode. This device is a transmissive modulator designed to work at a wavelength of 980 nm, compatible with many good laser diode sources. These materials have very good performance operating in reflection architectures. Choice of modulator type and configuration architecture is application-dependent. [1]

Once grown, the wafer is fabricated into discrete devices using a multi-step photolithography process consisting of etching and metallization steps. The NRL experimental devices have a 5 mm aperture, though larger devices are possible and are being designed and developed. It is important to point out that while MQW modulators have been used in many applications to date, modulators of such a large size are uncommon and require special fabrication techniques. [1]

MQW modulators are inherently quiet devices, accurately reproducing the applied voltage as a modulated waveform. An important parameter is contrast ratio, defined as Imax/Imin. This parameter affects the overall signal-to-noise ratio. Its magnitude depends on the drive voltage applied to the device and the wavelength of the interrogating laser relative to the exciton peak. The contrast ratio increases as the voltage goes up until a saturation value is reached. Typically, the modulators fabricated at NRL have had contrast ratios between 1.75:1 to 4:1 for applied voltages between 10 V and 25 V, depending on the structure. [1]

There are three important considerations in the manufacture and fabrication of a given device: inherent maximum modulation rate vs. aperture size; electrical power consumption vs. aperture size; and yield. [1]

Inherent Maximum Modulation Rate vs. Aperture Size

The fundamental limit in the switching speed of the modulator is the resistance-capacitance limit. A key tradeoff is area of the modulator vs. area of the clear aperture. If the modulator area is small, the capacitance is small, hence the modulation rate can be faster. However, for longer application ranges on the order of several hundred meters, larger apertures are needed to close the link. For a given modulator, the speed of the shutter scales inversely as the square of the modulator diameter. [1]

Electrical Power Consumption vs. Aperture Size

When the drive voltage waveform is optimized, the electrical power consumption of a MQW modulating retro-reflector varies as:

Dmod4 * V2 B2 Rs

Where Dmod is the diameter of the modulator, V is the voltage applied to the modulator (fixed by the required optical contrast ratio), B is the maximum data rate of the device, and RS is the sheet resistance of the device. Thus a large power penalty may be paid for increasing the diameter of the MQW shutter. [1]

Yield

MQW devices must be operated at high reverse bias fields to achieve good contrast ratios. In perfect quantum well material this is not a problem, but the presence of a defect in the semiconductor crystal can cause the device to break down at voltages below those necessary for operation. Specifically, a defect will cause an electrical short that prevents development of the necessary electrical field across the intrinsic region of the PIN diode. The larger the device the higher the probability of such a defect. Thus, If a defect occurs in the manufacture of a large monolithic device, the whole shutter is lost. [1]

To address these issues, NRL has designed and fabricated segmented devices as well as monolithic modulators. That is, a given modulator might be "pixellated" into several segments, each driven with the same signal. This technique means that speed can be achieved as well as larger apertures. The "pixellization" inherently reduces the sheet resistance of the device, decreasing the resistance-capacitance time and reducing electrical power consumption. For example, a one centimeter monolithic device might require 400 mW to support a one Mbit/s link. A similar nine segmented device would require 45 mW to support the same link with the same overall effective aperture. A transmissive device with nine "pixels" with an overall diameter of 0.5 cm was shown to support over 10 Mbit/s. [1]

This fabrication technique allows for higher speeds, larger apertures, and increased yield. If a single "pixel" is lost due to defects but is one of nine or sixteen, the contrast ratio necessary to provide the requisite signal-to-noise to close a link is still high. There are considerations that make fabrication of a segmented device more complicated, including bond wire management on the device, driving multiple segments, and temperature stabilization. [1]

An additional important characteristic of the modulator is its optical wavefront quality. If the modulator causes aberrations in the beam, the returned optical signal will be attenuated and insufficient light may be present to close the link. [1]

Applications

MMR systems are used in: [1]

See also

Related Research Articles

<span class="mw-page-title-main">Electro-optic modulator</span>

An electro-optic modulator (EOM) is an optical device in which a signal-controlled element exhibiting an electro-optic effect is used to modulate a beam of light. The modulation may be imposed on the phase, frequency, amplitude, or polarization of the beam. Modulation bandwidths extending into the gigahertz range are possible with the use of laser-controlled modulators.

<span class="mw-page-title-main">Retroreflector</span> Device to reflect radiation back to its source

A retroreflector is a device or surface that reflects radiation back to its source with minimum scattering. This works at a wide range of angle of incidence, unlike a planar mirror, which does this only if the mirror is exactly perpendicular to the wave front, having a zero angle of incidence. Being directed, the retroflector's reflection is brighter than that of a diffuse reflector. Corner reflectors and cat's eye reflectors are the most used kinds.

<span class="mw-page-title-main">Free-space optical communication</span> Communication using light sent through free space

Free-space optical communication (FSO) is an optical communication technology that uses light propagating in free space to wirelessly transmit data for telecommunications or computer networking. "Free space" means air, outer space, vacuum, or something similar. This contrasts with using solids such as optical fiber cable.

<span class="mw-page-title-main">Laser diode</span> Semiconductor laser

A laser diode is a semiconductor device similar to a light-emitting diode in which a diode pumped directly with electrical current can create lasing conditions at the diode's junction.

<span class="mw-page-title-main">Optical communication</span> Use of light to convey information

Optical communication, also known as optical telecommunication, is communication at a distance using light to carry information. It can be performed visually or by using electronic devices. The earliest basic forms of optical communication date back several millennia, while the earliest electrical device created to do so was the photophone, invented in 1880.

<span class="mw-page-title-main">Photonics</span> Technical applications of optics

Photonics is a branch of optics that involves the application of generation, detection, and manipulation of light in form of photons through emission, transmission, modulation, signal processing, switching, amplification, and sensing. Photonics is closely related to quantum electronics, where quantum electronics deals with the theoretical part of it while photonics deal with its engineering applications. Though covering all light's technical applications over the whole spectrum, most photonic applications are in the range of visible and near-infrared light. The term photonics developed as an outgrowth of the first practical semiconductor light emitters invented in the early 1960s and optical fibers developed in the 1970s.

Mode locking is a technique in optics by which a laser can be made to produce pulses of light of extremely short duration, on the order of picoseconds (10−12 s) or femtoseconds (10−15 s). A laser operated in this way is sometimes referred to as a femtosecond laser, for example, in modern refractive surgery. The basis of the technique is to induce a fixed phase relationship between the longitudinal modes of the laser's resonant cavity. Constructive interference between these modes can cause the laser light to be produced as a train of pulses. The laser is then said to be "phase-locked" or "mode-locked".

This is an index of articles relating to electronics and electricity or natural electricity and things that run on electricity and things that use or conduct electricity.

<span class="mw-page-title-main">Vertical-cavity surface-emitting laser</span> Type of semiconductor laser diode

The vertical-cavity surface-emitting laser is a type of semiconductor laser diode with laser beam emission perpendicular from the top surface, contrary to conventional edge-emitting semiconductor lasers which emit from surfaces formed by cleaving the individual chip out of a wafer. VCSELs are used in various laser products, including computer mice, fiber optic communications, laser printers, Face ID, and smartglasses.

Liquid crystal on silicon is a miniaturized reflective active-matrix liquid-crystal display or "microdisplay" using a liquid crystal layer on top of a silicon backplane. It is also referred to as a spatial light modulator. LCoS was initially developed for projection televisions but is now used for wavelength selective switching, structured illumination, near-eye displays and optical pulse shaping. By way of comparison, some LCD projectors use transmissive LCD, allowing light to pass through the liquid crystal.

<span class="mw-page-title-main">Pockels effect</span> Linear change in the refractive index of optical media due to an electric field

In optics, the Pockels effect, or Pockels electro-optic effect, is a directionally-dependent linear variation in the refractive index of an optical medium that occurs in response to the application of an electric field. It is named after the German physicist Friedrich Carl Alwin Pockels, who studied the effect in 1893. The non-linear counterpart, the Kerr effect, causes changes in the refractive index at a rate proportional to the square of the applied electric field. In optical media, the Pockels effect causes changes in birefringence that vary in proportion to the strength of the applied electric field.

<span class="mw-page-title-main">Visible light communication</span> Use of light in the visible spectrum as a telecommunication medium

In telecommunications, visible light communication (VLC) is the use of visible light as a transmission medium. VLC is a subset of optical wireless communications technologies.

<span class="mw-page-title-main">Silicon photonics</span> Photonic systems which use silicon as an optical medium

Silicon photonics is the study and application of photonic systems which use silicon as an optical medium. The silicon is usually patterned with sub-micrometre precision, into microphotonic components. These operate in the infrared, most commonly at the 1.55 micrometre wavelength used by most fiber optic telecommunication systems. The silicon typically lies on top of a layer of silica in what is known as silicon on insulator (SOI).

<span class="mw-page-title-main">Fiber-optic communication</span> Method of transmitting information

Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of infrared or visible light through an optical fiber. The light is a form of carrier wave that is modulated to carry information. Fiber is preferred over electrical cabling when high bandwidth, long distance, or immunity to electromagnetic interference is required. This type of communication can transmit voice, video, and telemetry through local area networks or across long distances.

A distributed-feedback laser (DFB) is a type of laser diode, quantum-cascade laser or optical-fiber laser where the active region of the device contains a periodically structured element or diffraction grating. The structure builds a one-dimensional interference grating, and the grating provides optical feedback for the laser. This longitudinal diffraction grating has periodic changes in refractive index that cause reflection back into the cavity. The periodic change can be either in the real part of the refractive index or in the imaginary part. The strongest grating operates in the first order, where the periodicity is one-half wave, and the light is reflected backwards. DFB lasers tend to be much more stable than Fabry–Perot or DBR lasers and are used frequently when clean single-mode operation is needed, especially in high-speed fiber-optic telecommunications. Semiconductor DFB lasers in the lowest loss window of optical fibers at about 1.55 μm wavelength, amplified by erbium-doped fiber amplifiers (EDFAs), dominate the long-distance communication market, while DFB lasers in the lowest dispersion window at 1.3 μm are used at shorter distances.

An electro-absorption modulator (EAM) is a semiconductor device which can be used for modulating the intensity of a laser beam via an electric voltage. Its principle of operation is based on the Franz–Keldysh effect, i.e., a change in the absorption spectrum caused by an applied electric field, which changes the bandgap energy but usually does not involve the excitation of carriers by the electric field.

An optical modulator is an optical device which is used to modulate a beam of light with a perturbation device. It is a kind of transmitter to convert information to optical binary signal through optical fiber or transmission medium of optical frequency in fiber optic communication. There are several methods to manipulate this device depending on the parameter of a light beam like amplitude modulator (majority), phase modulator, polarization modulator etc. The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source. This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators. According to manipulation of the properties of material modulators are divided into two groups, absorptive modulators and refractive modulators. Absorption coefficient can be manipulated by Franz-Keldysh effect, Quantum-Confined Stark Effect, excitonic absorption, or changes of free carrier concentration. Usually, if several such effects appear together, the modulator is called electro-absorptive modulator. Refractive modulators most often make use of electro-optic effect, other modulators are made with acousto-optic effect, magneto-optic effect such as Faraday and Cotton-Mouton effects. The other case of modulators is spatial light modulator (SLM) which is modified two dimensional distribution of amplitude & phase of an optical wave.

A superluminescent diode is an edge-emitting semiconductor light source based on superluminescence. It combines the high power and brightness of laser diodes with the low coherence of conventional light-emitting diodes. Its emission optical bandwidth, also described as full-width at half maximum, can range from 5 up to 750 nm.

Self-mixing or back-injection laser interferometry is an interferometric technique in which a part of the light reflected by a vibrating target is reflected into the laser cavity, causing a modulation both in amplitude and in frequency of the emitted optical beam. In this way, the laser becomes sensitive to the distance traveled by the reflected beam thus becoming a distance, speed or vibration sensor. The advantage compared to a traditional measurement system is a lower cost thanks to the absence of collimation optics and external photodiodes.

<span class="mw-page-title-main">Yasuharu Suematsu</span> Japanese scientist

Yasuharu Suematsu is a researcher and educator in optical communication technology. His research has included the development of Dynamic Single Mode Semiconductor Lasers for actuation and the development of high-capacity, long-distance optical fiber communications technology.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 "Modulating Retro Reflector for Free Space Optical Data Transfer using Multiple Quantum Well Technology". Archived from the original on 2008-10-26. Retrieved 2008-05-08.
  2. ↑ Coope, Robin J. N.; Whitehead, Lorne A.; Kotlicki, Andrzej (2002-09-01). "Modulation of retroreflection by controlled frustration of total internal reflection". Applied Optics. The Optical Society. 41 (25): 5357–5361. Bibcode:2002ApOpt..41.5357C. doi:10.1364/ao.41.005357. ISSN   0003-6935. PMID   12211564.
  3. ↑ Rabedeau, M. E. (1969). "Switchable Total Internal Reflection Light Deflector". IBM Journal of Research and Development. IBM. 13 (2): 179–183. doi:10.1147/rd.132.0179. ISSN   0018-8646.
  4. ↑ http://www.nrl.navy.mil/fpco/publications/2000United%20States%20Patent_%206,154,299.pdf [ dead link ]
  5. ↑ DRUM: Item 1903/6807 [ permanent dead link ]
  6. ↑ Fritz, I. J.; Brennan, T. M.; Hammons, B. E.; Howard, A. J.; Worobey, W.; Vawter, G. A.; Myers, D. R. (1993-07-26). "Low‐voltage vertical‐cavity transmission modulator for 1.06 μm". Applied Physics Letters. AIP Publishing. 63 (4): 494–496. doi:10.1063/1.109983. ISSN   0003-6951.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.