Myron Cottrell was the founder and owner of TPI Specialties, an automobile parts manufacturer, and Cottrell Racing Engines, a machine shop and engine building shop. He is also active in automobile racing, collecting, and restoration.
According to the TPI Specialties' official website, Cottrell was an engine builder for twenty years prior to founding the TPIS. [1]
In 1985 Cottrell bought a new Chevrolet Corvette and was intrigued to learn how its Tuned Port Injection system worked. After determining that the system could be improved significantly, Cottrell established his company, TPI Specialties, and began building and marketing aftermarket parts kits for hot rodders. [1] Today TPIS is still owned by Cottrell. The company owns numerous patents and is frequently cited as technical authority in such publications as Hot Rod Magazine and Car Craft magazine. [2]
Cottrell resided in Chaska, Minnesota. Myron died at the age of 75 on Dec 29th, 2017.
Cottrell is involved in sports car racing. In addition, he has bought and restored or modified a number of notable automobiles. Cars which Cottrell owns or formerly owned include the following:
Myron Cottrell’s brother, John Cottrell, bought a 1999 Chevrolet Monte Carlo NASCAR Busch Series race car and modified it to make it street legal. In 2006 the car received an appreciative mention from Car Craft Magazine after appearing at the Car Craft Summer Nationals auto show, and in 2006 it was run at Bonneville Speedway on the Bonneville Salt Flats and achieved a best official speed of 198.155 miles per hour. [6]
Hot rods are typically American cars that might be old, classic, or modern and that have been rebuilt or modified with large engines optimised for speed and acceleration. One definition is: "a car that's been stripped down, souped up and made to go much faster." However, there is no definition of the term that is universally accepted and the term is attached to a wide range of vehicles. Most often they are individually designed and constructed using components from many makes of old or new cars, and are most prevalent in the United States and Canada. Many are intended for exhibition rather than for racing or everyday driving.
A replacement automobile engine is an engine or a major part of one that is sold individually without any other parts required to make a functional car. These engines are produced either as aftermarket parts or as reproductions of an engine that has gone out of production.
The AMC AMX is a two-seat GT-style muscle car produced by American Motors Corporation from 1968 through 1970. As one of just two American-built two-seaters, the AMX was in direct competition with the one-inch (2.5 cm) longer wheelbase Chevrolet Corvette, for substantially less money. It was based on the new-for-1968 Javelin, but with a shorter wheelbase and deletion of the rear seat. In addition, the AMX's rear quarter windows remained fixed, making it a coupe, while the Javelin was a true two-door hardtop.
The Iron Duke engine is a 151 cu in (2.5 L) Straight-4 piston engine built by the Pontiac Motor Division of General Motors from 1977 until 1993. Originally developed as Pontiac's new economy car engine, it was used in a wide variety of vehicles across GM's lineup in the 1980s as well as supplied to American Motors Corporation (AMC). The engine was engineered for fuel efficiency, smooth operation, and long life, not for performance. Total Duke engine production is estimated to be between 3.8 and 4.2 million units.
The Buick V6, popularly referred to as the 3800 in its later incarnations, originally 198 cu in (3.2 L) and initially marketed as Fireball at its introduction in 1962, was a large V6 engine used by General Motors. The block is made of cast iron and all use two-valve-per-cylinder iron heads, actuated by pushrods. The engine, originally designed and manufactured in the United States, was also produced in later versions in Australia. It was the first six-cylinder engine designed exclusively for Buick products since the Buick straight-six was discontinued in 1930.
Michael Lee "Mickey" Thompson was an American auto racing builder and promoter.
The Chevrolet Turbo-Air 6 is a flat-six air-cooled automobile engine developed by General Motors (GM) in the late 1950s for use in the rear-engined Chevrolet Corvair of the 1960s. It was used in the entire Corvair line, as well as a wide variety of other applications.
A custom car is a passenger vehicle that has been either substantially altered to improve its performance, often by altering or replacing the engine and transmission; made into a personal "styling" statement, using paint work and aftermarket accessories to make the car look unlike any car as delivered from the factory; or some combination of both. A desire among some automotive enthusiasts in the United States is to push "styling and performance a step beyond the showroom floor - to truly craft an automobile of one's own." A custom car in British according to Collins English Dictionary is built to the buyer's own specifications.
Edelbrock, LLC is an American manufacturer of specialty automotive and motorcycle parts. The company is headquartered in Olive Branch, Mississippi, with a Southern California R&D Tech Center located in Cerritos, CA. The Edelbrock Sand Cast and Permanent Mold Manufacturing foundries are located in San Jacinto, CA. Edelbrock has two facilities in North Carolina: the Edelbrock Carburetor Division in Sanford, and the Edelbrock Race Center in Mooresville.
The Rambler Rebel is an automobile that was produced by the American Motors Corporation (AMC) of Kenosha, Wisconsin for the 1957–1960 model years, as well as again for 1966 and 1967.
Dean Moon was an American automobile designer. He grew up in Norwalk, California. Moon was around cars and racing from his youth. His father owned "Moon Cafe" and had a go-kart track he called "Moonza", a pun on Monza. Dean was involved in dry lakes hot-rodding in the late 1940s. He founded MOON Speed Equipment (c.1950) and worked to improve the quality and safety of speed and racing products his entire life.
Devin Enterprises was an American automotive manufacturer that operated from 1955 to 1964. Devin was mainly known for producing high quality fiberglass car bodies that were sold as kits, but they also produced automotive accessories as well as complete automobiles. The company was founded by Bill Devin.
TPI Specialties is the name of an auto parts manufacturer specializing in air induction and fuel delivery parts, with a particular emphasis on GM Tuned Port Injection applications.
Gale Banks is an American hot rodder, drag racer, engineer, and entrepreneur who grew up in Lynwood, California. His company, Gale Banks Engineering, sells performance parts for automotive and marine engines. It specializes in diesel engines, and high end cutting edge equipment, performance parts, and auxiliaries. The company has approximately 100+ employees.
Gale Banks Engineering and its four divisions, Banks Power, Banks Technology, Banks Marine, and Banks Racing, are companies created by Southern California hot rodder and automobile engineer Gale Banks. These companies design, engineer, and build high performance parts for the automobile and marine aftermarket and military customers. Located in Azusa, California, the company develops technology and components for both gasoline and diesel-powered vehicles, but is best known for advancing development of the turbocharger and ultra high performance diesel engines for racing and street purposes.
Gene Winfield is an American automotive customizer and fabricator. In the mid-1960s, his designs caught the attention of the film community, resulting in a large body of his work appearing on screen, including in the iconic 1982 film Blade Runner.
1950s American automobile culture has had an enduring influence on the culture of the United States, as reflected in popular music, major trends from the 1950s and mainstream acceptance of the "hot rod" culture. The American manufacturing economy switched from producing war-related items to consumer goods at the end of World War II, and by the end of the 1950s, one in six working Americans were employed either directly or indirectly in the automotive industry. The United States became the world's largest manufacturer of automobiles, and Henry Ford's goal of 30 years earlier—that any man with a good job should be able to afford an automobile—was achieved. A new generation of service businesses focusing on customers with their automobiles came into being during the decade, including drive-through or drive-in restaurants and greatly increasing numbers of drive-in theaters (cinemas).
Howard Johansen is an American gasser drag racer. He won the first ever National Hot Rod Association (NHRA) C/Gas national title, at Great Bend, Kansas, in 1955,.
Doug Thorley was an American Funny Car drag racer, hot rodder and businessman. In 1967, he won the NHRA Nationals' first Funny Car Eliminator title, and was given Car Craft's All-Star Drag Racing Team Funny Car Driver of the Year Award in 1968. Hot Rod magazine describes him as "one of drag racing's most famous early era drivers."
The Kurtis Sport Car (KSC) is a two-seat, aluminum-body sports car designed by Frank Kurtis and manufactured by Kurtis Kraft in 1949 and 1950. Built with numerous components from a 1949 Ford, the KSC was built as both a production car and a kit car. It was sold at a base price of $3,495, and with options it could cost up to $5,000, which was approximately $1,000 more than the then-new Jaguar XK120.