Never Waste a Good Crisis

Last updated

Never Waste a Good Crisis, also known as the Wolstenholme Report, is a 2009 report written by Andrew Wolstenholme and commissioned by Constructing Excellence. Wolstenholme analysed the British construction industry's performance against the objectives set out in the 1998 Egan Report. His assessment was pessimistic, noting a failure to meet targets in almost all areas bar profitability. Wolstenholme outlined several problems prevalent in the industry and measures that might be taken to resolve them, calling on the industry to use the Great Recession as an opportunity to change its performance.

Contents

Background

Sir John Egan quoted in the Wolstenholme Report

We could have had a revolution and what we've achieved is a bit of improvement ... I would give the industry 4 out of 10

Constructing Excellence, a UK construction industry organisation, commissioned Wolstenholme to assess the progress made against the recommendations of the 1998 Egan Report. [1] [2] There was a perception that the industry was continuing to underperform - in 2009 there was only a 50% chance of a project being completed on time or on budget. [3] The Wolstenholme Report was published on 30 November 2009 with a foreword written by Michael Latham (who wrote the Latham Report), Sir John Egan and Nick Raynsford (a former construction minister). [2] [4]

Findings

Wolstenholme stated that some progress had been made against Egan's targets, but that the industry's performance fell considerably short in several categories and that compliance with some of Egan's targets was only accomplished in a superficial manner. [2] Egan targeted a 10% year-on-year reduction in capital cost and construction time; a 20% reduction in accidents and defects; a 10% improvement in productivity, turnover and profits and a 20% improvement in predictability. Some improvement was achieved in safety and productivity but only the profitability target was wholly achieved. The improvement was markedly better in the sub-set of demonstration projects selected as case studies by Constructing Excellence than in the industry as a whole. [5] Wolstenholme stated that it was not possible to determine whether improvements in profitability had derived from measures implemented as a result of the Egan Report or through the effects of the continuous economic growth experienced in the years following the Early 1990s recession. [4]

Wolstenholme found that the greatest benefit from the Egan Report, as perceived by those within the industry, was a greater focus on collaboration and partnering with some reporting benefits in quality control, whole life costing and safety. [5] Wolstenholme concluded that many of the apparent changes in the industry following Egan were merely paying "lip service" to the 1998 report. [4] He was largely favourable to Egan's objectives but said it may have been naïve to expect a direct relationship between the best practice expected by Egan and the actual steps taken by the industry. [4]

Proposals

In addition to his review of the progress made against the objectives of the Egan Report Wolstenholme made several recommendations of his own. [3] He proposed that the construction sector take the opportunity presented by the Great Recession to rebuild itself as a sustainable, low carbon industry. Wolstenholme proposed a shift of focus to consider whole-life cost rather than the relatively small and upfront design and construction costs. [2]

Wolstenholme was generally pessimistic about the future performance of the industry and its capacity for change. He highlighted the lack of "joined-up thinking" with regards to sustainability and the proliferation of industry bodies which fragmented the industry. [3] He stated that the traditional separation of construction managers along professional and disciplinary boundaries led to compartmentalization and a failure to attract ethnic minorities and women. [6]

Wolstenholme decried the trend for clients to focus on short-term economic issues rather than considering the built environment as a long term asset. He noted that clients were tending to move away from collaborative partnering contracts to traditional method to allow them to exploit the increased competition in the market following the recession. [6]

Wolstenholme considered that incentives needed to drive companies to invest in innovation instead of being happy to accept moderate returns. [6] [2] He called for change to be driven by contractors and sub-contractors rather than, as traditionally, by clients. [2] Wolstenholme was also critical of government policy, pointing out that there had been nine different construction ministers and nine housing ministers in the nine years preceding his report and that responsibility for training and skills was fragmented across several government departments. [5] He called for the government to reduce waste in its procurement streams and to provide means of improving the training of construction workers. [2]

Related Research Articles

Kaizen is a concept referring to business activities that continuously improve all functions and involve all employees from the CEO to the assembly line workers. Kaizen also applies to processes, such as purchasing and logistics, that cross organizational boundaries into the supply chain. It has been applied in healthcare, psychotherapy, life coaching, government, and banking.

The Toyota Production System (TPS) is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS is a management system that organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers. The system is a major precursor of the more generic "lean manufacturing". Taiichi Ohno and Eiji Toyoda, Japanese industrial engineers, developed the system between 1948 and 1975.

<span class="mw-page-title-main">Performance indicator</span> Measurement that evaluates the success of an organization

A performance indicator or key performance indicator (KPI) is a type of performance measurement. KPIs evaluate the success of an organization or of a particular activity in which it engages. KPIs provide a focus for strategic and operational improvement, create an analytical basis for decision making and help focus attention on what matters most.

<span class="mw-page-title-main">Green building</span> To save the environment／resources

Green building refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planning to design, construction, operation, maintenance, renovation, and demolition. This requires close cooperation of the contractor, the architects, the engineers, and the client at all project stages. The Green Building practice expands and complements the classical building design concerns of economy, utility, durability, and comfort. Green building also refers to saving resources to the maximum extent, including energy saving, land saving, water saving, material saving, etc., during the whole life cycle of the building, protecting the environment and reducing pollution, providing people with healthy, comfortable and efficient use of space, and being in harmony with nature Buildings that live in harmony. Green building technology focuses on low consumption, high efficiency, economy, environmental protection, integration and optimization.’

The Latham Report, titled Constructing the Team, was an influential report written by Sir Michael Latham, published in July 1994. Latham was commissioned by the United Kingdom government and industry organisations to review procurement and contractual arrangements in the UK construction industry, aiming to tackle controversial issues facing the industry during a period of lapse in growth as a whole.

In business, engineering, and manufacturing, quality – or high quality – has a pragmatic interpretation as the non-inferiority or superiority of something ; it is also defined as being suitable for the intended purpose while satisfying customer expectations. Quality is a perceptual, conditional, and somewhat subjective attribute and may be understood differently by different people. Consumers may focus on the specification quality of a product/service, or how it compares to competitors in the marketplace. Producers might measure the conformance quality, or degree to which the product/service was produced correctly. Support personnel may measure quality in the degree that a product is reliable, maintainable, or sustainable. In such ways, the subjectivity of quality is rendered objective via operational definitions and measured with metrics such as proxy measures.

<span class="mw-page-title-main">Production (economics)</span> Process of using materials to produce something

Production is the process of combining various inputs, both material and immaterial in order to create output. Ideally this output will be a good or service which has value and contributes to the utility of individuals. The area of economics that focuses on production is called production theory, and it is closely related to the consumption theory of economics.

<span class="mw-page-title-main">Avanti (project)</span>

Avanti was established by the UK Department of Trade and Industry in 2002 to formulate an approach to collaborative working in order to enable construction project partners to work together effectively. The project was promoted by the Department of Trade and Industry with the support of most of the largest UK firms in the construction industry. Avanti also involved the International Alliance for Interoperability (IAI), Loughborough University and Co-Construct, a network of five construction research and information organizations.

A glossary of terms relating to project management and consulting.

Lean dynamics is a business management practice that emphasizes the same primary outcome as lean manufacturing or lean production of eliminating wasteful expenditure of resources. However, it is distinguished by its different focus of creating a structure for accommodating the dynamic business conditions that cause these wastes to accumulate in the first place.

Lean IT is the extension of lean manufacturing and lean services principles to the development and management of information technology (IT) products and services. Its central concern, applied in the context of IT, is the elimination of waste, where waste is work that adds no value to a product or service.

The Egan Report, titled Rethinking Construction, was an influential report on the UK construction industry produced by an industry task force chaired by Sir John Egan, published in November 1998. Together with the Latham Report, Constructing the Team, produced four years earlier, it did much to drive efficiency improvements in UK construction industry practice during the early years of the 21st century.

Constructing Excellence is a United Kingdom construction industry membership organisation created in 2003, the only such which draws its member organisations from across the industry supply chain, ranging from clients, through contractors and consultants, to suppliers and manufacturers of building materials and components. Constructing Excellence attempts to apply the reforms recommended in the 1994 Latham and 1998 Egan Reports, having absorbed several bodies established following those reports. In August 2016, Constructing Excellence became part of BRE, but retains its identity and core purposes.

The Strategic Forum for Construction is a United Kingdom construction industry organisation established in 2001 as the principal point of liaison between UK government and the major construction membership organisations. It also enables different representatives of the UK industry to discuss strategic issues facing construction and to develop joint strategies for industry improvement.

Richard Gilbert Saxon CBE is an English architect. He was chairman of Building Design Partnership (BDP), chairman of BE, a vice-president of the Royal Institute of British Architects (2002-2008), Master of the Worshipful Company of Chartered Architects (2005-2006), president of the British Council for Offices (1995-1996) and Chairman of the Joint Contracts Tribunal. He was awarded CBE in 2001 for services to British architecture and construction.

Rapid Results is a structured process that mobilizes teams to achieve tangible results over a rapid time frame and accelerate organizational learning. Schaffer Consulting, a management consulting firm headquartered in Stamford, Connecticut, developed the Rapid Results approach based on their experience working with clients across industries to achieve breakthrough levels of performance. The approach and its practitioners have since been recognized in The New York Times, Harvard Business Review, and Foreign Policy, among other publications.

Andrew William Wolstenholme is an English civil engineer, and group technical director of Laing O'Rourke.

Construction 2025 is a British government report issued in July 2013 outlining its industrial strategy for the sector until 2025. Key aims were to reduce programme lengths and costs, reduce greenhouse gas emissions and improve the trade gap. The policy saw the establishment of the Construction Leadership Council to drive change in the industry.

Transforming Infrastructure Performance is a British government report on the UK construction industry. Issued by the Infrastructure and Projects Authority in December 2017, its aim is to improve productivity in the sector and make savings of £15 billion per year. It proposes to do this by increasing innovations like off-site construction and new digital technology, improving government procurement procedures, and improving integration and collaboration. It is seen as a welcome initiative by the industry, and early implementation of its aims has been incorporated into the water industry's 2019 price review.

The industrialization of construction is the process through which construction aims to improve productivity through increased mechanization and automation. The process commonly involves modularization, prefabrication, preassembly, and mass production.

References

  1. ↑ Lyle, Richard (14 January 2016). "Operational Excellence demands you should never waste a good crisis". Operational Excellence Society. Retrieved 24 December 2017.
  2. 1 2 3 4 5 6 7 "Never Waste A Good Crisis". Constructing Excellence. Constructing Excellence. 18 December 2014. Retrieved 24 December 2017.
  3. 1 2 3 Loosemore, Martin (2013). Innovation, Strategy and Risk in Construction: Turning Serendipity Into Capability. Routledge. p. 108. ISBN   9781136673559 . Retrieved 24 December 2017.
  4. 1 2 3 4 Green, Stuart D. (2011). Making Sense of Construction Improvement. John Wiley & Sons. ISBN   9781444341089 . Retrieved 24 December 2017.
  5. 1 2 3 Wolstenholme, Andrew. "Never Waste a Good Crisis" (PDF). Constructing Excellence. Retrieved 3 January 2018.
  6. 1 2 3 Loosemore, Martin (2013). Innovation, Strategy and Risk in Construction: Turning Serendipity Into Capability. Routledge. p. 109. ISBN   9781136673559 . Retrieved 24 December 2017.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.